[ANN][SLR] SolarCoin | PoW to PoS v. 2.0 | Solar Proof of Generation (§1 = 1MWh)

[Snake Pliskin]

If i'm on the correct fork, and on version 2.07, and have 8 connections to the network should I also quit my wallet and delete the peers.dat file? is is this unnecessary? thank you

I did just to be safe and looks like we're all up and running again

[solarcoiner]

OK, I'm all set again. It looks like every now and then the wallet tries to sync up with that other chain though. Why is that? Just out of curiosity.

It's because you deleted your peers.dat file!

I deleted it and now it's also trying to sync to the other chain.
I now restored the old peer.dat file and everything is working again, sorry guys but removing the peers.dat file was the wrong move for me

edit: However I was on the correct chain the whole time , so maybe there is another issue.

[biodieselchris]

running:

Code:

"version" : "v2.0.7.0",
"protocolversion" : 70004,
"walletversion" : 60001,

already did the peer.dat stuff

Issues:

• Coin total not accurate: 55.7k reported total versus 54.5k correct amt. If I download the transactions as a CSV and pull out 2M in non-confirmed mined coins (from error code before), the CSV total is correct.
• I'm on block 837,998 and the B.E. linked from solarcoin.org is on 837,145

?? 

[vipgelsi]

On current block 837,178  after  re download blockchain and delete peers file

[CryptoNick]

I saw Bittrex online and my wallet was synced at 2.0.7. I sent to the same Bittrex address I sent into my wallet too.

I didn't think to check the forum and looks like my coins went into a black hole when I sent to Bittrex. Usually where I end up in Crypto anyways. So how do I get my coins back?

[Epiphany]

I saw Bittrex online and my wallet was synced at 2.0.7.

I didn't think to check the forum and looks like my coins went into a black hole when I sent to Bittrex. Usually where I end up in Crypto anyways. So how do I get my coins back?

You'll have to do what I did: re-download the block chain, start up fresh again, let it sync and re-scan your wallet. The small amount I had sent to Bittrex that got lost in the ether magically reappeared after I did all that.

[richiela]

All,

We are running the latest version (2.07) and we are in sync with the explorer at https://chainz.cryptoid.info/slr/.  As far as I'm aware, that is the correct chain.  I've disabled until I get confirmation from the dev team.

For those that have sent coins here that didn't get here, just reload your blockchain and rescan.  That should get your coins here, or put them back into your wallet.

Lastly, there is no way we could have forked the network... we have been constantly running the entire time during all the updates, and we don't stake/mint so we're not helping generate blocks that would cause weighting issues.  I'm going to chalk it up to coincidence

thanks,
richie@bittrex

[y_virtual]

running:

Code:

"version" : "v2.0.7.0",
"protocolversion" : 70004,
"walletversion" : 60001,

already did the peer.dat stuff

Issues:

• Coin total not accurate: 55.7k reported total versus 54.5k correct amt. If I download the transactions as a CSV and pull out 2M in non-confirmed mined coins (from error code before), the CSV total is correct.
• I'm on block 837,998 and the B.E. linked from solarcoin.org is on 837,145

?? 

You always need to re-scan the wallet after upgrade and/or blockchain reload. This has been working for me so far to bring back the balances in sync. Check this out:
https://bitcointalk.org/index.php?topic=785257.msg12591524#msg12591524

[y_virtual]

All,

We are running the latest version (2.07) and we are in sync with the explorer at https://chainz.cryptoid.info/slr/.  As far as I'm aware, that is the correct chain.  I've disabled until I get confirmation from the dev team.

For those that have sent coins here that didn't get here, just reload your blockchain and rescan.  That should get your coins here, or put them back into your wallet.

Lastly, there is no way we could have forked the network... we have been constantly running the entire time during all the updates, and we don't stake/mint so we're not helping generate blocks that would cause weighting issues.  I'm going to chalk it up to coincidence

thanks,
richie@bittrex

Great info from Bittrex!
Thank you Richie!

[onsightit]

OK, I'm all set again. It looks like every now and then the wallet tries to sync up with that other chain though. Why is that? Just out of curiosity.

It's because you deleted your peers.dat file!

I deleted it and now it's also trying to sync to the other chain.
I now restored the old peer.dat file and everything is working again, sorry guys but removing the peers.dat file was the wrong move for me

edit: However I was on the correct chain the whole time , so maybe there is another issue.

That's correct, it's more important that you remove peers.dat after you get back on the main chain.  That will improve your connections.  But, as solarcoiner points out, you open yourself up to getting blocks from everyone on the bad fork.  At some point, when everyone is on 2.0.7 and in sync, it would be good to reset the peers.dat file so no one is getting blocked.

PS: You are witnessing the security of PoS/T as pertaining to network consensus.  Pretty entertaining.

-Steve

[onsightit]

I saw Bittrex online and my wallet was synced at 2.0.7. I sent to the same Bittrex address I sent into my wallet too.

I didn't think to check the forum and looks like my coins went into a black hole when I sent to Bittrex. Usually where I end up in Crypto anyways. So how do I get my coins back?

CryptoNick,

I'm not sure what you have tried so far, but on 2.0.7 I would:

1. Reload the blockchain
2. Repair wallet (use console command 'repairwallet')
2. Rescan the wallet  (hopefully, after the rescan those transactions should have an "!" icon instead of a "?")
3. Wait for those transactions to be resent (there's also a console command "resendtx" you might try, but it does not always initiate a resend for security reasons)

Note: I don't know the status of the Bittrex upgrade yet.  Things should sort out soon.


-Steve

[onsightit]

running:

Code:

"version" : "v2.0.7.0",
"protocolversion" : 70004,
"walletversion" : 60001,

already did the peer.dat stuff

Issues:

• Coin total not accurate: 55.7k reported total versus 54.5k correct amt. If I download the transactions as a CSV and pull out 2M in non-confirmed mined coins (from error code before), the CSV total is correct.
• I'm on block 837,998 and the B.E. linked from solarcoin.org is on 837,145

??  

You are on the wrong chain.  Please see instructions above.  https://bitcointalk.org/index.php?topic=785257.msg12592113#msg12592113

-Steve

[onsightit]

All,

We are running the latest version (2.07) and we are in sync with the explorer at https://chainz.cryptoid.info/slr/.  As far as I'm aware, that is the correct chain.  I've disabled until I get confirmation from the dev team.

For those that have sent coins here that didn't get here, just reload your blockchain and rescan.  That should get your coins here, or put them back into your wallet.

Lastly, there is no way we could have forked the network... we have been constantly running the entire time during all the updates, and we don't stake/mint so we're not helping generate blocks that would cause weighting issues.  I'm going to chalk it up to coincidence

thanks,
richie@bittrex

Hi Richie,

If you are in sync with the block explorer, you are good.

Thanks for your support!

-Steve

[CryptoNick]

I saw Bittrex online and my wallet was synced at 2.0.7.

I didn't think to check the forum and looks like my coins went into a black hole when I sent to Bittrex. Usually where I end up in Crypto anyways. So how do I get my coins back?

You'll have to do what I did: re-download the block chain, start up fresh again, let it sync and re-scan your wallet. The small amount I had sent to Bittrex that got lost in the ether magically reappeared after I did all that.

That worked and I Staked a block immediately after download and rescan. Thanks for your help! Also noticed Bittrex closed their wallet now too.

[onsightit]

I saw Bittrex online and my wallet was synced at 2.0.7.

I didn't think to check the forum and looks like my coins went into a black hole when I sent to Bittrex. Usually where I end up in Crypto anyways. So how do I get my coins back?

You'll have to do what I did: re-download the block chain, start up fresh again, let it sync and re-scan your wallet. The small amount I had sent to Bittrex that got lost in the ether magically reappeared after I did all that.

That worked and I Staked a block immediately after download and rescan. Thanks for your help! Also noticed Bittrex closed their wallet now too.

Great, and you should not lose any interest, as you noticed a stake right away.

-Steve

[onsightit]

We're starting to get a nice spread in the blocks now.   There may be slow periods of block creation to come, but it will smooth out.

-Steve

[axllht]

which nodes are correct and which are not?

addnode=162.243.214.120
addnode=1.121.160.151
addnode=101.169.255.252
addnode=113.174.32.228
addnode=113.174.35.87
addnode=137.135.57.119
addnode=142.134.100.20
addnode=162.243.214.120
addnode=173.60.11.36
addnode=173.68.141.24
addnode=176.9.63.136
addnode=188.165.2.147
addnode=192.99.47.133
addnode=194.184.186.162
addnode=2001:41d0:2:1ec3::
addnode=210.246.30.127
addnode=213.91.205.134
addnode=23.21.204.34
addnode=2601:154:8002:875d:dcd9:c50c:d769:ac54
addnode=2a01:4f8:150:8185::2
addnode=49.197.174.5
addnode=50.197.11.193
addnode=54.201.183.106
addnode=58.160.211.161
addnode=68.48.223.139
addnode=70.208.138.179
addnode=73.163.102.175
addnode=73.201.188.111
addnode=79.217.196.51
addnode=80.244.27.79
addnode=81.4.178.146
addnode=82.115.162.78
addnode=86.183.67.43
addnode=87.212.116.150
addnode=87.252.179.44
addnode=88.10.67.136
addnode=89.248.172.172
addnode=94.23.29.195
addnode=96.248.111.100
addnode=98.115.147.74
addnode=99.179.138.68

[Alao]

Seems this 2.07 freezes when loading.  I'm in the process of trying to rescan my wallet but seems stuck...

[vipgelsi]

Seems this 2.07 freezes when loading.  I'm in the process of trying to rescan my wallet but seems stuck...

Give it time.

[biodieselchris]

now I'm on block 837589, which matches the explorer but missing ~30k coins (over half). I haven't transacted any coins since 2014.