KanoPool since 2014 🐈 - PPLNS and Solo 0.5% fee - Worldwide - 2436 blocks

[xuy]

Hi Kano,

When will you distribute the held BTC b/c fork, not dust? Thanks.

BTW, it's nice to see this month turn around. The best pool for a lot of small miners with lots of fun

hell my first 7 amount to $2.50 in btc and i prolly have over 200+ in total dust payemnts that are adding up

The dust limit is anything under 10,000 satoshi so 0.0001 BTC which is about 6c - so no, 7 of them wont add up to $2.50, maybe about 100 random dust rewards would add up to $2.50

However, if you have lots of dust AND non-dust payouts, that means I have to manually confirm each one to work out what is and isn't sent.

If you mean you have non-payouts coz you didn't enter a payout address, then that's a different issue, but if you have a mix of them both, they'll have to wait until I do the accounting code.
You never know, they might be worth more than a few dollars by the time that's done

[1715644583]

1715644583

[Sansaa]

Hello I'm pretty new to the Kanopool I have started mining about 4 days ago on the pool with my 2 S9s. I have read that the payment is given after 100 confirmation of finding a block but in the last 2 blocks which was found 1,2 days ago I received the payment before the 100 confirmation and it showed that my average THs was only 2.3 -2.6 I don't understand why it showed such a low THs where as at the time my TH was around 28.
And my average % was showing more than 0.01%, can someone explain this to me?
Block   Block UTC           Miner Reward   N Diff   N Range   Pool N Avg         Your %   Your N Diff   Your N Avg   Your BTC
498508   10/Dec 03:39   17.43860143   7.958T   413hr 27m 45s   22.96PHs   0.01%   901.236M   2.60THs   0.00197478
498476   9/Dec 23:27   14.22993506   7.956T   414hr 20m 6s   22.91PHs   0.01%   801.733M   2.31THs   0.00143390

[noquedaeltiempo]

Hello I'm pretty new to the Kanopool I have started mining about 4 days ago on the pool with my 2 S9s. I have read that the payment is given after 100 confirmation of finding a block but in the last 2 blocks which was found 1,2 days ago I received the payment before the 100 confirmation and it showed that my average THs was only 2.3 -2.6 I don't understand why it showed such a low THs where as at the time my TH was around 28.
And my average % was showing more than 0.01%, can someone explain this to me?
Block   Block UTC           Miner Reward   N Diff   N Range   Pool N Avg         Your %   Your N Diff   Your N Avg   Your BTC
498508   10/Dec 03:39   17.43860143   7.958T   413hr 27m 45s   22.96PHs   0.01%   901.236M   2.60THs   0.00197478
498476   9/Dec 23:27   14.22993506   7.956T   414hr 20m 6s   22.91PHs   0.01%   801.733M   2.31THs   0.00143390

There is a ramp up period, take a look at the "Your N Avg" every time a new block is found (you can also take a look at your "Shift Graph" in the "Workers" Section when logged in Kano.is) it should get higher as the days pass. Fully ramp up period is about 13-15 days.

Guys, please read the thread, all these questions has been addressed millions of times. I'm a noob myself (about 3 months here at Kano), but people need to start reading the thread and the pool page info to figure these simple things by themselves.

Thread is getting swamped with the same questions over and over and over again and it's getting tiresome.

[brad2388]

So under my shift workers graph it shows the last 5nd reward in red.
My bar is past the 5nd now. Does that mean im done with the 5nd?

[os2sam]

So under my shift workers graph it shows the last 5nd reward in red.
My bar is past the 5nd now. Does that mean im done with the 5nd?

Do you have shares in all open shifts?

[voodooman]

Hey folks,

I'm having a problem with my new avalon controller (RPi3).
I need to install some software on it. Basically a VPN Client (neorouter).
But because of the architecture I can't install either the client for openwrt nor the client for debian arm.

So just one easy question:
Has anybody running an "AvalonController" on a Debian Raspberry by just installing some additional Software
instead of using openwrt?

I asked google but just getting old instructions about bfgminer or something like that.
And I dont't want to break anything.

Thanks a lot....

MINE ON!!!

[noquedaeltiempo]

So under my shift workers graph it shows the last 5nd reward in red.
My bar is past the 5nd now. Does that mean im done with the 5nd?

STEP 1: From HELP -> PAYOUTS from Kano.is

PPLNS acts like the reward 'ramps up' when you first start mining.
What actually happens?

The 5Nd means it takes that long to reward your shares.
The ramp isn't missing rewards, it's delaying them to reduce variance.
Each share is rewarded in all the blocks found in the 5Nd after the share.
That's simply how it reduces variance. Each share's reward is averaged out over the 5Nd after it.
The pool hash rate for the last day is roughly 28.89PHs which means the 5Nd 'ramp' is roughly 13days 17hrs.

STEP 2: Now, go to ACCOUNT -> REWARDS and take note of the N RANGE VALUE of your last block reward. As example mine is 413hr 27m 45s

STEP 3: Take the N RANGE VALUE and transform it to days: 413 hours / 24 hours = 17.20 days

STEP 4: Take the 5Nd ramp time from the first step and compare it to your N RANGE VALUE in days: 13 days 17hrs < 17.10 days

If the N RANGE VALUE of your last block reward is higher than the 5Nd ramp from HELP -> PAYOUTS you are over the ramp period.

Hope it helps, english is not my first language. Old timers @ Kano.is please correct me if I'm wrong.

[nazzer]

Easiest way to see for me is just to look at the workers shift graph:

https://kano.is/index.php?k=usperf

This requires you to be logged in though.

[HSchmirPo]

So my S9 arrived and is connected to this pool.
It shows firmware: Fri Nov 17 17:37:49 CST 2017
Is this the last firmware?

[smutboy420]

So my S9 arrived and is connected to this pool.
It shows firmware: Fri Nov 17 17:37:49 CST 2017
Is this the last firmware?

If its a new one then more then likely yes..   its almost a full year later then mine have for firmware.

[HSchmirPo]

Thanks to smutboy420 and to the Kano community!

[Minty_Andy]

So under my shift workers graph it shows the last 5nd reward in red.
My bar is past the 5nd now. Does that mean im done with the 5nd?

Where is the wiki that addresses each of these questions?

This thread here has obviously grown long and hard to mine for each answer.

I have picked things up from asking myself and seeing these similar questions asked in a variety of ways, but maybe a static wiki we can point new folks to is easier than answering or sending back into the thread?

[luxMiner]

Hello I'm pretty new to the Kanopool I have started mining about 4 days ago on the pool with my 2 S9s. I have read that the payment is given after 100 confirmation of finding a block but in the last 2 blocks which was found 1,2 days ago I received the payment before the 100 confirmation and it showed that my average THs was only 2.3 -2.6 I don't understand why it showed such a low THs where as at the time my TH was around 28.
And my average % was showing more than 0.01%, can someone explain this to me?
Block   Block UTC           Miner Reward   N Diff   N Range   Pool N Avg         Your %   Your N Diff   Your N Avg   Your BTC
498508   10/Dec 03:39   17.43860143   7.958T   413hr 27m 45s   22.96PHs   0.01%   901.236M   2.60THs   0.00197478
498476   9/Dec 23:27   14.22993506   7.956T   414hr 20m 6s   22.91PHs   0.01%   801.733M   2.31THs   0.00143390

There is a ramp up period, take a look at the "Your N Avg" every time a new block is found (you can also take a look at your "Shift Graph" in the "Workers" Section when logged in Kano.is) it should get higher as the days pass. Fully ramp up period is about 13-15 days.

Guys, please read the thread, all these questions has been addressed millions of times. I'm a noob myself (about 3 months here at Kano), but people need to start reading the thread and the pool page info to figure these simple things by themselves.

Thread is getting swamped with the same questions over and over and over again and it's getting tiresome.

i don't find the 'thread getting swamped with the same questions' necessarily tiresome. the fact anyone can ask any question without worry of being looked down upon as silly, no matter how noob it may be, adds to the intimate quality of the kano pool community.

[leongb4]

My Blockchain bitcoin wallet changes its address every transaction I guess for security purposes, didn't even realize, since I got my first few payments no problem. I updated my wallet address here in the settings after I realized this, but we had already matured both blocks. Are my payments somehow gone? Or have they not been sent out yet? Sorry for the noob question.

[2tights]

My Blockchain bitcoin wallet changes its address every transaction I guess for security purposes, didn't even realize, since I got my first few payments no problem. I updated my wallet address here in the settings after I realized this, but we had already matured both blocks. Are my payments somehow gone? Or have they not been sent out yet? Sorry for the noob question.

pretty sure you still have access to any addresses that you have on your account

[overcon]

My Blockchain bitcoin wallet changes its address every transaction I guess for security purposes, didn't even realize, since I got my first few payments no problem. I updated my wallet address here in the settings after I realized this, but we had already matured both blocks. Are my payments somehow gone? Or have they not been sent out yet? Sorry for the noob question.

They never leave, it just cycles new ones but the money is tied to your account not the specific address.

[PPOC]

Getting a couple S9's online, 14TH batch. Any way to adjust the fan speed and Clock anymore? cold basement and chips are 68-71. I'd like to turn fans down for noise and run chips around 88-92. I remember seeing a URL link to still access the fan and clock settings, latest shipped FW does not have those options anymore.

[Biffa]

Getting a couple S9's online, 14TH batch. Any way to adjust the fan speed and Clock anymore? cold basement and chips are 68-71. I'd like to turn fans down for noise and run chips around 88-92. I remember seeing a URL link to still access the fan and clock settings, latest shipped FW does not have those options anymore.

http://miner.ip.addr/cgi-bin/minerAdvanced.cgi

That's as good as it gets but not fan speed directly just a small amount of control over the max frequency

[rifleman74]

Time for a block dance.   to the left, to the left, to the right, to the right, to the front, to the front, to the back, to the back, now dip baby dip baby dip baby dip.........

[Biffa]