CCminer(SP-MOD) Modded GPU kernels.

[Alex.hdtv]

Spreadminer 10 Hangs the system..

Did you test the fixed_3 version?

Oк.
Works good.

Multi-GPU bad job.

[joniosbra]

Hello all! I need some expert advice...

I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.  
(using kill a watt to measure)

[sp_]

Hello all! I need some expert advice...

I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.  
(using kill a watt to measure)

Do you have a card wich use alot of power. With more than 1 8pin power adapter?

The lbry mod is not compiled with compute 61, so the driver will compile a new kernel runtime. You can try to install an earlier driver like 376.xx. There are some reports that the latest driver is not so good for mining. Another thing you could try is to reduce the intensity. Run with -i 23 or -i 24 or less

[Newton90]

sp_ ,are you planning to create equihash mod?

[sp_]

sp_ ,are you planning to create equihash mod?

I have already made one. Not for the public. I run it on some of my rigs.

[ol92]

sp_ ,are you planning to create equihash mod?

I have already made one. Not for the public. I run it on some of my rigs.

I am curious : what hashrate do you obtain with a GTX 1080/1070?
Regards

[Amph]

so no bitsend mod sp? i'm waiting for it the diff look still affordable

[sp_]

so no bitsend mod sp? i'm waiting for it the diff look still affordable

Tonight..

[Amph]

so no bitsend mod sp? i'm waiting for it the diff look still affordable

Tonight..

nethash is 50 mega now, amd gpu are mining and dumping...

if a rig can do 20 mg(3.x x 6) they are earning like 0.24 a day, that is insane

[sp_]

sp_ ,are you planning to create equihash mod?

I have already made one. Not for the public. I run it on some of my rigs.

I am curious : what hashrate do you obtain with a GTX 1080/1070?
Regards

I get 275 on the gtx 1060 3gb with low power..

[joniosbra]

Hello all! I need some expert advice...

I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.  
(using kill a watt to measure)

Do you have a card wich use alot of power. With more than 1 8pin power adapter?

The lbry mod is not compiled with compute 61, so the driver will compile a new kernel runtime. You can try to install an earlier driver like 376.xx. There are some reports that the latest driver is not so good for mining. Another thing you could try is to reduce the intensity. Run with -i 23 or -i 24 or less

All four 1070 have 1 8pin power connector. I try reduze intensiva to 23 and 24... it keeps pulling 850-860w.
I'll try earlier nvidia drivers, but I started to think that the "Kill a Watt" could be defective...

[AzzAz]

Hello all! I need some expert advice...

I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.  
(using kill a watt to measure)

Do you have a card wich use alot of power. With more than 1 8pin power adapter?

The lbry mod is not compiled with compute 61, so the driver will compile a new kernel runtime. You can try to install an earlier driver like 376.xx. There are some reports that the latest driver is not so good for mining. Another thing you could try is to reduce the intensity. Run with -i 23 or -i 24 or less

All four 1070 have 1 8pin power connector. I try reduze intensiva to 23 and 24... it keeps pulling 850-860w.
I'll try earlier nvidia drivers, but I started to think that the "Kill a Watt" could be defective...

LBRY is power hungry, what are you expecting? Same results I have

[bathrobehero]

For some of you who might still hold some PIVX (DNET) or have masternodes running, it reached $1 per coin.

A week ago it was $0.14 per coin and a month ago it was $0.03.

[Amph]

unfortunately not, i don't invest in asic coin even less in pure pos, still dreaming about the pump on lbry...

[m1n1ngP4d4w4n]

Hello all! I need some expert advice...

I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.  
(using kill a watt to measure)

Do you have a card wich use alot of power. With more than 1 8pin power adapter?

The lbry mod is not compiled with compute 61, so the driver will compile a new kernel runtime. You can try to install an earlier driver like 376.xx. There are some reports that the latest driver is not so good for mining. Another thing you could try is to reduce the intensity. Run with -i 23 or -i 24 or less

All four 1070 have 1 8pin power connector. I try reduze intensiva to 23 and 24... it keeps pulling 850-860w.
I'll try earlier nvidia drivers, but I started to think that the "Kill a Watt" could be defective...

LBRY is power hungry, what are you expecting? Same results I have

What nvidia-smi is saying ? check the power usage with it.

[bathrobehero]

unfortunately not, i don't invest in asic coin even less in pure pos, still dreaming about the pump on lbry...

Same, but it wasn't an ASIC coin and it's not pure PoS. It started with 6 months of Quark PoW phase when there were no known Quark ASICs and switched to PoS 6 months later last year August. Isn't the Baikal ASICs were shipped sometime around September?

The last PoW block had a difficulty of 48.5 so it's safe to say that no ASICs were mining it during its PoW period.

Anyway, I'm just glad I didn't sell.

The LBRY pump has to come eventually...

[chup]

nethash is 50 mega now, amd gpu are mining and dumping...

if a rig can do 20 mg(3.x x 6) they are earning like 0.24 a day, that is insane

No, Rx4X0 rig can only do less than 10 MH/s. And solo is not working. At least for me.

[mikhan]

rx470 rig gives about 8-9 mh/s, rx480 9-10, solo is working btw

[joniosbra]

Hello all! I need some expert advice...

I have a 4 x 1070 (evga sc) rig, mining lbc, set to 49% power limit, doing about 230mhs per card, PULLING 860W FROM THE WALL! If I set PL to 60 or 70 or 80% the MHS/WATT is even worse. What is wrong here?
I'm using a h81 pro btc, celeron 1820, 1x8gb ddr3, windows 10 64, last nvidia driver, I have done de bios update for mb and vgas, and I am using usb power risers.  
(using kill a watt to measure)

Do you have a card wich use alot of power. With more than 1 8pin power adapter?

The lbry mod is not compiled with compute 61, so the driver will compile a new kernel runtime. You can try to install an earlier driver like 376.xx. There are some reports that the latest driver is not so good for mining. Another thing you could try is to reduce the intensity. Run with -i 23 or -i 24 or less

All four 1070 have 1 8pin power connector. I try reduze intensiva to 23 and 24... it keeps pulling 850-860w.
I'll try earlier nvidia drivers, but I started to think that the "Kill a Watt" could be defective...

LBRY is power hungry, what are you expecting? Same results I have

Well... some people in this thread claims less than 900W with 6 1070 mining LBC

[mikhan]

i got 300-310 mh/s lbc with 155wt (nvidiainspector or nv-smi data), so 920 watt total of 6x1070 rig
further downvoltage is possible, <900 watt is not a dream