Fuzzbawls
|
|
December 21, 2016, 04:06:44 AM |
|
Then the name of the algorithm would be POW?
no, the name of the algorithm would be "AES Pattern Search". or, specifically "1GB AES Pattern Search"
|
|
|
|
rmd73
Sr. Member
Offline
Activity: 385
Merit: 252
Think with your brain. It is not illegal (yet).
|
|
December 21, 2016, 04:54:10 AM |
|
Thank you @Fuzzbawls for stepping in while RL kept me away @teosanru In all that document "user@machine:~$" represents only the user shell prompt and doesn't include the actual path one might currently be (at least I configured it that way on my machines and accounts to keep the terminal readable and usable even for long paths), hence I never wrote "user@machine:~/Europecoin-V3src/$" or (even worse) "user@machine:~/Europecoin-V3src/src/$". For the purpose of finding out what path you're currently in, you could use the "pwd" command (short for "Path to Work Directory"). So, when you are about to explicitly grant "execute" permissions, you're assumed to be in "~/Europecoin-V3src" (where "~" stands for your home directory i.e. "/home/pool") even if the "tutorial" states only "user@machine:~$. @Fuzzbawls has summed up very nicely in her/his reply (in the first code box are listed only the commands one should have typed in the terminal, without the cumbersome and potentially misleading "prompts"). With time and a bit of practice, keeping track of PWD will come almost naturally. Congrats for joining *nix army Payment is good and the fun never ends
|
|
|
|
rmd73
Sr. Member
Offline
Activity: 385
Merit: 252
Think with your brain. It is not illegal (yet).
|
|
December 21, 2016, 05:05:56 AM |
|
Then the name of the algorithm would be POW?
no, the name of the algorithm would be "AES Pattern Search". or, specifically "1GB AES Pattern Search" lol I'll rise: rotfl @teosanru: PoW ~ https://en.wikipedia.org/wiki/Proof-of-work_systemPoS ~ https://en.wikipedia.org/wiki/Proof-of-stakeI welcomed you to *nix army earlier, now I must introduce you to a concept/attitude/mantra: RTFM (a.k.a. "Read The Fine Manual" or "please, do your homework first"). Also, acronyms can be tricky and even Wikipedia can pull some funny stunts
|
|
|
|
Limx Dev
Copper Member
Legendary
Offline
Activity: 2324
Merit: 1348
|
|
December 21, 2016, 11:35:33 AM |
|
I wouldn't recommend using any kind of mining equipment (CPU/GPU/FPGA/ASIC) while swimming. coinofview appears to still be running ERCv2, which is depreciated, and all the information is inaccurate. But if it is x11? Because several sites have read that that is its algorithm, but the pool that exists uses hodl miner, so my question of what is the name of its algorithm. Maybe this coin can be mined with GPU? I've only seen, mining with CPU with the same software with which hodl is mine That is the old core. ERC is complete new.
|
Bitcore BTX - a UTXO fork of Bitcoin - since 2017
|
|
|
Limx Dev
Copper Member
Legendary
Offline
Activity: 2324
Merit: 1348
|
|
December 21, 2016, 11:37:08 AM |
|
Hello, First, let's make sure we all are speaking about the same things. Please quote here the exact text of the error you encountered. I'm sure we can make it work. I will show the steps that I followed and I think they are not very clear I followed them to the letter1) # get the source user@machine:~$ git clone https://github.com/LIMXTEC/Europecoin-V3 Europecoin-V3src/ # actually go there user@machine:~$ cd Europecoin-V3src/ *In the first step is very clear, and I have done it without problems
Here it is not clear to me that it is done from step 1 to 2? Because in step 1 it says that I should use user @ machine: ~ $ cd Europecoin-V3src / But in step 2 when you must give the permission and the rest you are here: User @ machine: ~ $ and not here: user @ machine: ~ / Europecoin-V3src $ / In which folder should it be located to give those permissions and update what was described in the step?2) # I needed to explicitly grant "execute" permission to all shell scripts in the source tree. # I know, I'm lazy... # YMMV. user@machine:~$ chmod -Rc +x ./*.sh user@machine:~$ chmod -Rc +x ./*/*.sh user@machine:~$ chmod -Rc +x ./*/*/*.sh user@machine:~$ chmod -Rc +x ./*/*/build_detect_platform user@machine:~$ ./autogen.sh user@machine:~$ ./configure user@machine:~$ make *In number 3 is also unclear on which folder should I place to do this So it tells me that the files do not exist. If I do it here: "User @ machine: ~ $" and not in: "user@machine:~/Europecoin-V3src:~/scr$"
3. user@machine:~$ strip europecoind user@machine:~$ strip europecoin-cli user@machine:~$ strip europecoin-tx user@machine:~$ strip qt/europecoin-qt # just making sure it will run user@machine:~$ chmod +x qt/europecoin-qt * What would be the command to execute the demon
I've tried this: Cd Europecoin-V3src / src ./europecoind
When I do, I say this:
/home/pool/.europecoin/europecoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=DPmgz5R8jwZzpEAaoGQNMFQhjS9aTnoCEkhNpeJdCeg7 (you do not need to remember this password) The username and password MUST NOT be the same. If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "EuropeCoin Alert" admin@foo.com
Looking at the path that tells me I see that the folder "europecoin" has a dot in front of the name: ".europecoin" which makes this hidden and inaccessible, how can I do from console that this folder has the name without the point? Because I do not know how to remove that point I resort to this: I create the file with this command: Sudo nano /home/pool/.europecoin/europecoin.CONF I save it and run it again Cd Europecoin-V3src / src ./europecoind And give me the same message that I create the file europecoin.conf4) # if you want the binaries copied to /usr/local/bin user@machine:~$ make install *This is also not clear to me, I am new to linux, I appreciate the help
I pay 200 ERC for a good explain. Fetching and compiling the source (assumes you have all the dependencies):cd git clone https://github.com/LIMXTEC/Europecoin-V3.git Europecoin-V3src/ cd Europecoin-V3src/ chmod -Rc +x ./*.sh chmod -Rc +x ./*/*.sh chmod -Rc +x ./*/*/*.sh chmod -Rc +x ./*/*/build_detect_platform ./autogen.sh ./configure make make install
*the last line is optional, and may need to be ran with root privs by running 'sudo make install' Running the compiled binaries:if you DID NOT do the last optional compile step, then after compilation finishes, and from the same directory that the compilation steps were done in: ./src/europecoind (starts the headless daemon) ./src/europecoin-cli (CLI program to issue RPC commands like 'getinfo', 'stop', etc) ./src/qt/europecoin-qt (starts the QT GUI wallet)
if you DID do the last optional compile step (make install), then you can use the following terminal commands from any directory: europecoind (starts the headless daemon) europecoin-cli (CLI program to issue RPC commands like 'getinfo', 'stop', etc) europecoin-qt (starts the QT GUI wallet)
Setting up the conf file:You can access/create/edit the conf file from the terminal using the following commands: cd ~/.europecoin/ vi europecoin.conf
*If you don't like vi, you can use nano instead (may be easier for first-time users): 'nano europecoin.conf' Minimum recommended entries for the conf file are as follows: rpcuser=xxx rpcpassword=xxx daemon=1 server=1 listen=1
*replace the strings of 'xxx' with whatever you desire BONUS - Download the pre-compiled linux 64-bit binaries:If all else fails, and you would rather just download the pre-compiled binaries, follow the following steps wget https://github.com/LIMXTEC/Europecoin-V3/releases/download/Europecoin_V3.0.1.0.1/Europecoin-Linux64.zip unzip Europecoin-Linux64.zip cp europecoin* /usr/local/bin/
*if the last step fails with a permission error, instead run 'sudo cp europecoin* /usr/local/bin/ Then, to run: europecoind (starts the headless daemon) europecoin-cli (CLI program to issue RPC commands like 'getinfo', 'stop', etc) europecoin-qt (starts the QT GUI wallet)
Okay, i want to pay my bounty. https://github.com/LIMXTEC/Europecoin-V3/blob/master/doc/build-XUbuntu-14.04-amd64.md
|
Bitcore BTX - a UTXO fork of Bitcoin - since 2017
|
|
|
|
|
rmd73
Sr. Member
Offline
Activity: 385
Merit: 252
Think with your brain. It is not illegal (yet).
|
|
December 21, 2016, 07:30:34 PM |
|
Ask @Fuzzbawls 'cause he nailed it
|
|
|
|
szenekonzept (OP)
Legendary
Offline
Activity: 2100
Merit: 1012
Europecoin Financecloud API
|
|
December 21, 2016, 08:14:33 PM |
|
Ask @Fuzzbawls 'cause he nailed it Repository commits merged, thank you Fuzzbawls, rmd73 and Chris
have fun Matthias
.
|
|
|
|
|
Limx Dev
Copper Member
Legendary
Offline
Activity: 2324
Merit: 1348
|
|
December 22, 2016, 11:00:14 AM |
|
Okay thank you, 200 ERC payed. 49f5c8824ca8693df35aac8df28e1cfc08f83509b762cba48ca1748c4820a535-000
|
Bitcore BTX - a UTXO fork of Bitcoin - since 2017
|
|
|
|
AizenSou
|
|
December 22, 2016, 07:54:36 PM |
|
Hi szenekonzept,
Any chance to exchange Europecoin v2 to v3? I still have a lot of v2 stucking in a wallet and trying since months to sync but no node is available.
Thanks in advance.
Regards,
|
|
|
|
Limx Dev
Copper Member
Legendary
Offline
Activity: 2324
Merit: 1348
|
|
December 22, 2016, 08:07:01 PM |
|
Hi szenekonzept,
Any chance to exchange Europecoin v2 to v3? I still have a lot of v2 stucking in a wallet and trying since months to sync but no node is available.
Thanks in advance.
Regards,
You can send me your Privkey. I want to look. Best Regards Christian
|
Bitcore BTX - a UTXO fork of Bitcoin - since 2017
|
|
|
szenekonzept (OP)
Legendary
Offline
Activity: 2100
Merit: 1012
Europecoin Financecloud API
|
|
December 22, 2016, 08:42:23 PM |
|
Hi szenekonzept,
Any chance to exchange Europecoin v2 to v3? I still have a lot of v2 stucking in a wallet and trying since months to sync but no node is available.
Thanks in advance.
Regards,
You can send me your Privkey. I want to look. Best Regards Christian @AizenSou this is the guy to trust, no worry have fun Matthias .
|
|
|
|
Pinker
Newbie
Offline
Activity: 56
Merit: 0
|
|
December 22, 2016, 09:01:12 PM |
|
Hello everyone, confirming that I received the 1000ERC prize money into my wallet! Thank you Matthias and hereby I declare that these coins will be spent only in the real shop eyes to eyes, once it is made possible! Will not go to an exchange or be used for an online shopping, but will wait in the wallet till I can spend them in the shop made of bricks and mortar. Looking forward to it!
Thank you once again and cheers!
|
|
|
|
CryptoJohn
Legendary
Offline
Activity: 1680
Merit: 1003
Well, That's Crypto :-\
|
|
December 23, 2016, 01:42:11 AM |
|
I'm a little confused on the below.
Can someone fill in the blanks please?
Algorithm: ?
Confirmations: every 300 seconds
Current POW Reward: 1 ERC per block
Maximum Coins: ?
POW Reward Halving: ?
thanks, john
|
|
|
|
metamorphin
Legendary
Offline
Activity: 1106
Merit: 1004
No risk, no fun!
|
|
December 23, 2016, 01:50:15 AM |
|
I'm a little confused on the below.
Can someone fill in the blanks please?
Algorithm: ?
Confirmations: every 300 seconds
Current POW Reward: 1 ERC per block
Maximum Coins: ?
POW Reward Halving: ?
thanks, john
No Halving The source is here: https://github.com/LIMXTEC/Europecoin-V3Greetz Steve
|
|
|
|
Fuzzbawls
|
|
December 23, 2016, 02:30:04 AM |
|
I'm a little confused on the below.
Can someone fill in the blanks please?
Algorithm:1GB AES Pattern Search (didn't we JUST go over this a page or two ago?) Confirmations:every 300 seconds Current POW Reward:1 ERC per block Maximum Coins:No hard limit POW Reward Halving:None
|
|
|
|
metamorphin
Legendary
Offline
Activity: 1106
Merit: 1004
No risk, no fun!
|
|
December 23, 2016, 02:31:43 AM |
|
I'm a little confused on the below.
Can someone fill in the blanks please?
Algorithm:1GB AES Pattern Search (didn't we JUST go over this a page or two ago?) Confirmations:every 300 seconds Current POW Reward:1 ERC per block Maximum Coins:No hard limit edit: 32.400.000 total MAX POW Reward Halving:None
|
|
|
|
|