klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2015, 06:18:18 AM |
|
Has anyone published out the wattage draw to frequency settings in a chart for 110v?
Also...
I'm considering adding in additional S5s to some 2 Phase 208v 30 Amp Breakers. I have 4 of these circuits just sitting idle in one of my rooms.
Im a little unfamiliar with 208v to begin with, let alone 2 Phase. If I buy the simple distros for the sockets, use EVGA g2 1300w PSUs, how many could I plug in and feed of a 30a 208v 2 Phase?
Thanks!
Strato
30a x 208v = 6000W, of which you should try to keep the load below 5400W (80% capacity) since mining is 24/7 load. Thats enough to run 4 1300W PSUs, but not necessarily at full load. 1250W draw at ~90% efficiency means the PSU draws almost 1400W at the wall, and 4*1400 would exceed the recommended maximum of 5400W. It would be advised to try and draw 1200W or less from each 1300W PSU
|
|
|
|
|
fullzero
Legendary
Offline
Activity: 1260
Merit: 1009
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2015, 01:13:40 PM |
|
|
|
|
|
Biodom
Legendary
Offline
Activity: 3850
Merit: 4227
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2015, 05:03:56 PM |
|
Another question...
How do you shut these miners down to say replace a fan or move the miner? Mine came with an antminer motherboard switch. Being a computer geek, I hate just cutting the power. Somehow it feels wrong, but is that what your supposed to do? Just kill the power either with the red antminer switch or the psu switch? Doing this a couple of time switching out fans to try them with temp control lead one board to not respond during initial boot. It was only after full boot and a restart that the board came back online. I can't find a shutdown or turn off setting anywhere, so how dose the rest of you power down your miner for either maintenence or changing a fan?
Unfortunately, the only way Bitmain gave us to turn them off is to turn off the PSU. Yes, it does seem wrong and I hate doing it every time I need to. ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) yeah, I don't like to do it too, however, there is some additional power in PSU to slowly ease miner off after you threw the switch-you can see it best if you have a fan powered by molex-it will be several seconds before it stops, so i don't think that it is such a big deal.
|
|
|
|
Biodom
Legendary
Offline
Activity: 3850
Merit: 4227
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2015, 05:06:35 PM |
|
you must have low electricity cost. I am actually thinking of cutting down my home mining with ~10.5c/kwh power.
|
|
|
|
bigblind
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2015, 05:22:41 PM |
|
What I can't get over, as other are stating, is why is there no top or bottom? The cheap plastic sides are bad enough. Why couldn't you provide a plastic top and bottom.
I can't directly answer your question, but I've tested closing top and bottom off. It moves temps ~1.5C, not record breaking, and that's SEALED top and bottom rather than more plates which won't seal. I have ordered my first S5. Got to see how mining works with them. I have been mining with GPUs now for over a year.
Do you think it is more profitable to switch from GPU mining to ASIC mining via Antminer S5 for example? I don't have to pay for electricity anyways. Therefore I could sell my GPUs (6x R9 280x and 3x r9 290) and switch them for ASICs. But lately GPU mining is dieing so hard. It was fun early, when coinlaunches were made. But there are so less coinlaunches in last time because of all the scams. The cards have been running on Nicehash since over 2-3 months now.
I would have thought that you're losing more in GPU depreciation than you're mining, surely? What coin are you on? I have been running them on Nicehash lately. But as I meantioned, I don't have to pay for electricity at the moment. But the circuits are limited, I actually don't know how much I can after all plug into the wall ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) I couldn't find out now at all which were good fans to hook up on the S5s to keep them more quiet. And can I power 2 S5s with one EVGA Supernova 1300, or even with a Corsair Platimax 1200i? http://www.corsair.com/en-us/ax1200i-digital-atx-power-supply-1200-watt-80-plus-platinum-certified-fully-modular-psu
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 07, 2015, 07:27:27 PM |
|
Thanks dogie and biodom!
I think I'm gonna get one of those nf-12. I need the miner a bit more quiet at a longer distance. I can hear it from in my kitchen which is down stairs and around the corner from my stairs and the miner is literally at the top of the stairs. I don't mind hearing it if I'm by my desk or walking up the stairs but not throughout the house. Thanks for letting me know that they are not quiet but from a distance they are not noticeable.
Dogie,
Thanks for the hardware error explaination. So a few hardware errors is almost expected when temps climb, but when hardware errors climb exponetionally, it's a problem. I've cranked the miner up to 300Mhz or about 1Th/s. Temps went up to 61 and 57. Within an hour I got 1 hardware error. It's been at this setting now for almost three hours and still at 1 hw. I like your range of 60-65c it's more realistic to real computing.
Another question...
How do you shut these miners down to say replace a fan or move the miner? Mine came with an antminer motherboard switch. Being a computer geek, I hate just cutting the power. Somehow it feels wrong, but is that what your supposed to do? Just kill the power either with the red antminer switch or the psu switch? Doing this a couple of time switching out fans to try them with temp control lead one board to not respond during initial boot. It was only after full boot and a restart that the board came back online. I can't find a shutdown or turn off setting anywhere, so how dose the rest of you power down your miner for either maintenence or changing a fan?
There is no other way to turn them off but its not a problem and you're essentially doing the same process as on a computer. Software gets itself in order, hard drive does some final shutdown operations, then motherboard flicks the control pin on the 24 pin ATX to the PSU. That triggers the PSU to turn off. You'd be doing exactly the same with your antminer switch.
|
|
|
|
TrevorS
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2015, 04:01:46 AM Last edit: February 08, 2015, 06:01:45 AM by TrevorS |
|
Have had two S5 running flawlessly for three weeks and today experienced an issue (batch four, OE file system, CGminer 4.9.0, 306.25 MHz clock). One of the two appeared to have frozen. Perhaps half a day elapsed while both controller and Hash appeared stuck. Discovered the problem by observing lower than expected Hash on Eligius and traced it back to the specific S5 by addressing it, whereupon it displayed the miner status page (without my logging in or selecting it), but was unresponsive to GUI selections. I shut down the PSU for sixty seconds, fired it up again, and back to normal. It now once again appears fine.
|
|
|
|
MyRig
Donator
Hero Member
Offline
Activity: 792
Merit: 510
support@myrig.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2015, 04:06:30 AM |
|
Thank you for the update. Sometimes, miner can freezes just like any other computers, but when it happens, if you simply physically power it off and power it back on, most of the time, it will fixes the problem. If the problem persists, please contact us and we will look into further! Thank you for selecting Antminer Product Lines!! Have had two S5 running flawlessly for three weeks and today experienced an issue. One of the two appeared to have frozen. Perhaps half a day elapsed while both controller and Hash appeared stuck. Discovered the problem by observing lower than expected Hash on Eligius and traced it back to the specific S5 by addressing it, whereupon it displayed the status page (without my logging in or requesting it), but was unresponsive to GUI selections. Shut down the PSU for sixty seconds, fired it up again, and back to normal. It now once again appears fine.
|
Antminer & DragonMint Repair E-mail: support@myrig.com T: @MyRig_com Return Address: MyRig 3700 Quebec Street, Unit 100-239, Denver, Colorado 80207, USA
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2015, 04:12:33 AM |
|
Have had two S5 running flawlessly for three weeks and today experienced an issue (batch four, OE file system, CGminer 4.9.0). One of the two appeared to have frozen. Perhaps half a day elapsed while both controller and Hash appeared stuck. Discovered the problem by observing lower than expected Hash on Eligius and traced it back to the specific S5 by addressing it, whereupon it displayed the miner status page (without my logging in or requesting it), but was unresponsive to GUI selections. Shut down the PSU for sixty seconds, fired it up again, and back to normal. It now once again appears fine.
That was fixed in the first firmware revision and was a known bug. You can download the latest S5 firmware here.
|
|
|
|
TrevorS
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2015, 04:24:43 AM |
|
That was fixed in the first firmware revision and was a known bug. You can download the latest S5 firmware here. Thanks, but actually, the Wednesday Jan 7 file system is what's already installed. It came pre-installed in my two miners. But thanks anyway ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ! PS. I appreciate you trying to help people out on this thread and I'm sorry you are sometimes received poorly. Your responses are necessarily conservative and it's a shame some individuals find that objectionable. Best wishes!
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2015, 04:57:44 AM |
|
That was fixed in the first firmware revision and was a known bug. You can download the latest S5 firmware here. Thanks, but actually, the Wednesday Jan 7 file system is what's already installed. It came pre-installed in my two miners. But thanks anyway ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) ! PS. I appreciate you trying to help people out on this thread and I'm sorry you are sometimes received poorly. Your responses are necessarily conservative and it's a shame some individuals find that objectionable. Best wishes! Thanks for your kind words. I guess only some of the causes were fixed in this version, probably the most frequent. On original stock I frozen within 2 days, on this one I haven't frozen since it was released.
|
|
|
|
Medow
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2015, 08:52:42 PM |
|
Why the topic title still show that the price of S5 is 0.25/GH while it is not.
It is 0.32/GH.
|
|
|
|
huffdaddy5
Newbie
Offline
Activity: 51
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2015, 08:59:39 PM |
|
What I can't get over, as other are stating, is why is there no top or bottom? The cheap plastic sides are bad enough. Why couldn't you provide a plastic top and bottom.
I can't directly answer your question, but I've tested closing top and bottom off. It moves temps ~1.5C, not record breaking, and that's SEALED top and bottom rather than more plates which won't seal. I have ordered my first S5. Got to see how mining works with them. I have been mining with GPUs now for over a year.
Do you think it is more profitable to switch from GPU mining to ASIC mining via Antminer S5 for example? I don't have to pay for electricity anyways. Therefore I could sell my GPUs (6x R9 280x and 3x r9 290) and switch them for ASICs. But lately GPU mining is dieing so hard. It was fun early, when coinlaunches were made. But there are so less coinlaunches in last time because of all the scams. The cards have been running on Nicehash since over 2-3 months now.
I would have thought that you're losing more in GPU depreciation than you're mining, surely? What coin are you on? I have been running them on Nicehash lately. But as I meantioned, I don't have to pay for electricity at the moment. But the circuits are limited, I actually don't know how much I can after all plug into the wall ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) I couldn't find out now at all which were good fans to hook up on the S5s to keep them more quiet. And can I power 2 S5s with one EVGA Supernova 1300, or even with a Corsair Platimax 1200i? http://www.corsair.com/en-us/ax1200i-digital-atx-power-supply-1200-watt-80-plus-platinum-certified-fully-modular-psuYes you can run 2 S5 off of 1 EVGA 1300W Gold Supernova. The 2 S5 at factory 350MHZ pulls about 1200W at the wall. I would not recommend the Corsair 1200W simply because the cost difference is not worth it $310 Corsair vs $170 EVGA 1300W. The efficiency difference between Gold and Platinum PSUs is slim, and you would probably end up getting the same efficiency because the Corsair would be at 100% load, where the EVGA would only be at a 90% load. Also you have zero room for overclocking on the Corsair and you might even need to underclock to fit both. I have smaller fans on mine and they pull together, 1170W at the wall. I'm running 120mm Delta replacement fans that push about 150 CFM. Photo of 2 S5 running on 1 EVGA 1300W. http://www.411px.com/S5porn.jpg
|
|
|
|
huffdaddy5
Newbie
Offline
Activity: 51
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2015, 09:05:34 PM |
|
Why the topic title still show that the price of S5 is 0.25/GH while it is not.
It is 0.32/GH.
That's a good question. Because at that ratio they would need to be selling for $289/ea. and they have never sold at the price. $340 was the lowest single price and even the 52x batch is currently priced at $350/ea. Not to mention that's not including shipping either.
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2015, 09:06:38 PM |
|
Why the topic title still show that the price of S5 is 0.25/GH while it is not.
It is 0.32/GH.
Its an old title from a different BTC price.
|
|
|
|
Medow
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2015, 09:08:40 PM |
|
Why the topic title still show that the price of S5 is 0.25/GH while it is not.
It is 0.32/GH.
Its an old title from a different BTC price. It is not hard to change the title, is it hard?
|
|
|
|
bigblind
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2015, 09:10:26 PM |
|
What I can't get over, as other are stating, is why is there no top or bottom? The cheap plastic sides are bad enough. Why couldn't you provide a plastic top and bottom.
I can't directly answer your question, but I've tested closing top and bottom off. It moves temps ~1.5C, not record breaking, and that's SEALED top and bottom rather than more plates which won't seal. I have ordered my first S5. Got to see how mining works with them. I have been mining with GPUs now for over a year.
Do you think it is more profitable to switch from GPU mining to ASIC mining via Antminer S5 for example? I don't have to pay for electricity anyways. Therefore I could sell my GPUs (6x R9 280x and 3x r9 290) and switch them for ASICs. But lately GPU mining is dieing so hard. It was fun early, when coinlaunches were made. But there are so less coinlaunches in last time because of all the scams. The cards have been running on Nicehash since over 2-3 months now.
I would have thought that you're losing more in GPU depreciation than you're mining, surely? What coin are you on? I have been running them on Nicehash lately. But as I meantioned, I don't have to pay for electricity at the moment. But the circuits are limited, I actually don't know how much I can after all plug into the wall ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) I couldn't find out now at all which were good fans to hook up on the S5s to keep them more quiet. And can I power 2 S5s with one EVGA Supernova 1300, or even with a Corsair Platimax 1200i? http://www.corsair.com/en-us/ax1200i-digital-atx-power-supply-1200-watt-80-plus-platinum-certified-fully-modular-psuYes you can run 2 S5 off of 1 EVGA 1300W Gold Supernova. The 2 S5 at factory 350MHZ pulls about 1200W at the wall. I would not recommend the Corsair 1200W simply because the cost difference is not worth it $310 Corsair vs $170 EVGA 1300W. The efficiency difference between Gold and Platinum PSUs is slim, and you would probably end up getting the same efficiency because the Corsair would be at 100% load, where the EVGA would only be at a 90% load. Also you have zero room for overclocking on the Corsair and you might even need to underclock to fit both. I have smaller fans on mine and they pull together, 1170W at the wall. I'm running 120mm Delta replacement fans that push about 150 CFM. Photo of 2 S5 running on 1 EVGA 1300W. http://www.411px.com/S5porn.jpgThank you for your response. I'm selling my GPUs already, some have been even sold. But somehow I'm a little bit afraid to switch all into Antminers. I somehow got used to my GPUs ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) but seems that era ended for me ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) . As I stated there is no electricity costs for me. And right now I do own 2 EVGA 1300 SuperNOVA and also the Corsair AX1200i. I don't have to buy them anymore. Did you have room to overclock your S5s with the EVGA? For the Corsair I guess this is what will be the problem. Guess I will have to underclock. But first I will run about 4 S5s. All powered by the EVGAs. Eventually I'll get a 5th, which will be hooked onto the Corsair and maybe a 6th one will follow. But that depends. Maybe next month or later, and if it will be still worthy then is the other question. My main concern is just about the noise. Did anybody measure decibels on the s5s? Right now even my 290s go up to 70 db. Guess sooner or later I will have to swap the fans on the S5s.
|
|
|
|
huffdaddy5
Newbie
Offline
Activity: 51
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2015, 09:21:13 PM |
|
Thank you for your response. I'm selling my GPUs already, some have been even sold. But somehow I'm a little bit afraid to switch all into Antminers. I somehow got used to my GPUs ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) but seems that era ended for me ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) . As I stated there is no electricity costs for me. And right now I do own 2 EVGA 1300 SuperNOVA and also the Corsair AX1200i. I don't have to buy them anymore. Did you have room to overclock your S5s with the EVGA? For the Corsair I guess this is what will be the problem. Guess I will have to underclock. But first I will run about 4 S5s. All powered by the EVGAs. Eventually I'll get a 5th, which will be hooked onto the Corsair and maybe a 6th one will follow. But that depends. Maybe next month or later, and if it will be still worthy then is the other question. My main concern is just about the noise. Did anybody measure decibels on the s5s? Right now even my 290s go up to 70 db. Guess sooner or later I will have to swap the fans on the S5s. Yes, the stock fan is loud at over 70 DB. I've got 2 different fans that I'm trying out. Both are hooked up externally, running 100% on a molex adapter. 1 is using Delta AFB1212HHE-F00 120mm Case cooler 2900 RPM 120.07 CFM rated 44DB so far this one is keeping my temps at around 55C and is only creating 50DB noise 1 is using Delta AFC1212DE 120mm x 38mm 4 Wire/5 Pin PWM 1.60A Max Speed: 3900 RPM Air Flow: 148.34 CFM This one is a little noiser and runs at around 58 DB
|
|
|
|
Liquid71
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 08, 2015, 11:29:24 PM |
|
What fan has the lowest dBA fan with acceptable CFM?
|
|
|
|
|