ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH

[Biodom]

http://www.amazon.com/gp/product/B004Y1HLA8/
Delta Electronics AFB1212SHE 120x120x38mm Cooling Fan, 151.85 CFM, 58 dBA, 3700 RPM, 1.06 AMP, PWM 4-pin connector

THIS IS FOR THE DELTA AFB1212SHE FAN

Thanks for this. Just ordered four of those fans off Amazon. Will give them a whirl.

Looking to order a couple more S5's this week.

What's the option code on the end? It'll be like AFB1212SHE-F00 or something. That's what determines things like the PWM, tach output vs locked rotor sensor, etc.

This is probably a good choice for $22, but it is not the same fan Phil, Strato and myself were talking about.
That fan was a deal on ebay for ~$8/fan, but with a wicked connector.
http://www.ebay.com/itm/191443200211

[1714802248]

1714802248

[1714802248]

1714802248

[1714802248]

1714802248

[Subw]

Did anyone noticed bitmain have increased shipping costs for S5 (was like 50 and now it is 80)

[cathoderay]

Actually, you can put 1 and 1 together ....
1. The C1 uses the same board as the S3
2. The S5 board fits the C1 water cooling block - https://bitcointalk.org/index.php?topic=914354

So there you have it.

Yes! Excellent pekatete - many thanks 

[Xian01]

This is probably a good choice for $22, but it is not the same fan Phil, Strato and myself were talking about.
That fan was a deal on ebay for ~$8/fan, but with a wicked connector.
http://www.ebay.com/itm/191443200211

Ah, ok. I don't do the whole EBay thing anymore. Hopefully these fans off Amazon.com will do the trick. I'll report back a bit later once I've done some testing.

[Biodom]

Did anyone noticed bitmain have increased shipping costs for S5 (was like 50 and now it is 80)

probably depends where. To US it is $41.5 (UPS) per unit if you order two S5 and $38 for fedex. If you order one, then $45-47

[CHAOSiTEC]

Any word on S6 ?

[MrTeal]

Any word on S6 ?

Word
 S6

[ZiG]

Any word on S6 ?

Word
 S6

Probably S4 with S5 boards...I guess...

ZiG

[mazedk]

Issue will be the BTC Price of the "S6" .. it'll be like 7-8BTC or so wont it? seeing from history with the S3 vs S4 Price.

[MrTeal]

Any word on S6 ?

Word
 S6

Probably S4 with S5 boards...I guess...

ZiG

Based on their previous lines, the even units have always been underclocked. Maybe you'll see an S6 with a 16-17 chip string instead of a 14 chip string, lowering the voltage to get better efficiency.

[sEpuLchEr]

Any word on S6 ?

Word
 S6

Probably S4 with S5 boards...I guess...

ZiG

Now.. that I will buy.... My home office is now clutter free with S4 and I plan to keep it that way. LOL.

[ZiG]

Issue will be the BTC Price of the "S6" .. it'll be like 7-8BTC or so wont it? seeing from history with the S3 vs S4 Price.

...and in 3-4TH range performance-wise ...I'd guess ...

[navigatrix]

has anyone tried these fans on the s5 im just worried about the noise? http://www.newegg.com/Product/Product.aspx?Item=N82E16835213001

Yes, the noise.
I was hoping someone could tell me is this is normal for a stock S5. I have two running, same clock speed, same location, same intake through an open window.
The fan on the second one is screaming (I mean SCREAMING) at 3960 RPM. Should I be worried?


S512    1d 3h 58m 44s   1099.92   1197.12   0   0.0014%   0                1,024   UUU   0.4554   0   3240    3240 0 0 0   49   49 47
KoolKit   0d 11h 39m 32s   1327.7   1192.95   0   0%           22,737,601   989   UUU   0.3851   0   3960    3960 0 0 0   55   55 48

are you sure the highlighted one is working, seems 0 submitted shares is quite low, and temp is way lower on that one too...

The numbers are copied from M's Miner Monitor and show blocks, not submitted shares. It is hashing nicely on GHASH.IO. Both the CGminer panel and M's are showing 0% HWE. Also the temps on the highlighted one are 55 & 48 -- one board hotter than the other. Frequency is set to 362.5 on both units.

I might try the Delta fans folks are talking about on this thread, but I wonder if there's a problem with the speed control signal and whether it would be any different with a new fan.

[Tupsu]

Based on their previous lines, the even units have always been underclocked. Maybe you'll see an S6 with a 16-17 chip string instead of a 14 chip string, lowering the voltage to get better efficiency.

S5 had 15 chip per board.( 7+8)+(7+8)=30

[MrTeal]

Based on their previous lines, the even units have always been underclocked. Maybe you'll see an S6 with a 16-17 chip string instead of a 14 chip string, lowering the voltage to get better efficiency.

S5 had 15 chip per board.( 7+8)+(7+8)=30

Sorry, 30. But the chain is 15*.

Same principle applies though. More chips for lower voltages and better efficiency.

*Voltage chain, that is. The chip chain is 30 per board.

[Stratobitz]

Have a number of $45 BitMain S5 Coupons and (7) $30 S5 Coupons left.

PM me if interested!

Strato

[aurel57]

Wondering why I have not received tracking on batch 4 yet?  Anybody get tracking yet, they were to ship out on the 12th.

[Phosphorous]

Wondering why I have not received tracking on batch 4 yet?  Anybody get tracking yet, they were to ship out on the 12th.

You can go to UPS and track by reference using your order number. Mine is on the way, just no emails from Bitmain and no update of status on their website.

[aurel57]

Wondering why I have not received tracking on batch 4 yet?  Anybody get tracking yet, they were to ship out on the 12th.

You can go to UPS and track by reference using your order number. Mine is on the way, just no emails from Bitmain and no update of status on their website.

ok thank you Phosphorous

EDIT: Found it! I just needed to change the delivery as being home to sign for it is hard and I rather have it sent to my local UPS store so I can just stop and pick it up.

[bgibso01]

Have a number of $45 BitMain S5 Coupons and (7) $30 S5 Coupons left.

PM me if interested!

Strato

Funny, I just emailed Yoshi as to why the variance in coupons.  Strange to me that those who took the chance on batch 1, are least rewarded.