soy
Legendary
Offline
Activity: 1428
Merit: 1013
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2015, 03:01:45 PM |
|
I make my own connections to my Antminers from my power supplies. Suddenly the PCIE-6 connectors prices have gone up. My ebay order purchased on 2/21 tracking shows they aren't even in the system yet and the seller is making angry sounds like I'm at fault for questioning. I think prices going up might mean somebody is buying them up like for a big farm. duang-it.
I recall my first S3. I made connectors from cut-down old power supply motherboard connectors.
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2015, 03:09:42 PM |
|
I am using a corsair 1000w PSU on this why so many HW?
We've told you many times now that those hardware errors are more than fine. There is nothing wrong with your S5.
|
|
|
|
coinits
Legendary
Offline
Activity: 1582
Merit: 1019
011110000110110101110010
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2015, 03:31:56 PM |
|
you are running some nice temps. What is your ambient temperature?
-1 to -5 C. We are in a deep freeze here.
|
Jump you fuckers! | The thing about smart motherfuckers is they sound like crazy motherfuckers to dumb motherfuckers. | My sig space for rent for 0.01 btc per week.
|
|
|
coinits
Legendary
Offline
Activity: 1582
Merit: 1019
011110000110110101110010
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2015, 03:33:43 PM |
|
Were somebody able to get this miner working with Nicehash with the p=... option?
I set the password for p=.... and the machine simply doesn't start to mine.
All 3 pools looks alive but no hashing.
Yes I have it working for me. It is showing as dead most of the time because I have it set p=0.015 but I do get some work from it. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FZVcMVFA.jpg&t=665&c=tyfzkYSSLzFj4Q) The problem with mine is that not shows the pool as dead. It's still shows alive. Were you just simply wrote p=0.0.15? What kind of firmware do you use? What is strange that I have 20 S5-s and all has the same problem.... Yes I simply wrote that as my password. I am using the default firmware that came with the unit. Also have not done any alterations to the device, re: new fans
|
Jump you fuckers! | The thing about smart motherfuckers is they sound like crazy motherfuckers to dumb motherfuckers. | My sig space for rent for 0.01 btc per week.
|
|
|
coinits
Legendary
Offline
Activity: 1582
Merit: 1019
011110000110110101110010
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2015, 03:34:49 PM |
|
umm look at the HW rate on that image above. I have 4k HW errors over 2days myself on my S5. what the hell? my S3s S4s and C1's only have like 10 HW errors. whats going on here? !!!!!
Perfectly normal. In fact negligible for the duration I have been mining.
|
Jump you fuckers! | The thing about smart motherfuckers is they sound like crazy motherfuckers to dumb motherfuckers. | My sig space for rent for 0.01 btc per week.
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2015, 03:43:52 PM |
|
Were somebody able to get this miner working with Nicehash with the p=... option? I set the password for p=.... and the machine simply doesn't start to mine. All 3 pools looks alive but no hashing.
Yes I have it working for me. It is showing as dead most of the time because I have it set p=0.015 but I do get some work from it. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FZVcMVFA.jpg&t=665&c=tyfzkYSSLzFj4Q) The problem with mine is that not shows the pool as dead. It's still shows alive. Were you just simply wrote p=0.0.15?What kind of firmware do you use? What is strange that I have 20 S5-s and all has the same problem.... you have an extra decimal - thats your problem. right now typical payment is at p=0.0108 .... its advised that you set it to something like p=0.012 so that the pool is only active when worthwhile
|
|
|
|
ElGabo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2015, 03:58:38 PM Last edit: March 01, 2015, 04:13:04 PM by ElGabo |
|
Were somebody able to get this miner working with Nicehash with the p=... option? I set the password for p=.... and the machine simply doesn't start to mine. All 3 pools looks alive but no hashing.
Yes I have it working for me. It is showing as dead most of the time because I have it set p=0.015 but I do get some work from it. The problem with mine is that not shows the pool as dead. It's still shows alive. Were you just simply wrote p=0.0.15?What kind of firmware do you use? What is strange that I have 20 S5-s and all has the same problem.... you have an extra decimal - thats your problem. right now typical payment is at p=0.0108 .... its advised that you set it to something like p=0.012 so that the pool is only active when worthwhile Sorry man.. It was a typo. I put p=0.011 I don't know what the heck.... Edit. All my s3-s, sp20-s are working fine, only the S5-s not.... ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Edit2. If i remove #xnsub from the pool address it works fine but no extranonce.... really ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
rpandassociates
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2015, 04:26:20 PM |
|
I dont undrstand how high HW in excess of 4k are normal I got 4.6k HW errors in 31hrs All my other units My S3' My S4's My C1's all have like 10HW or less for the same period 4.6k HW errors is crazy.when all my other units have like 10 That is not normal ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
Biodom
Legendary
Offline
Activity: 3864
Merit: 4285
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2015, 05:04:45 PM |
|
I dont undrstand how high HW in excess of 4k are normal I got 4.6k HW errors in 31hrs All my other units My S3' My S4's My C1's all have like 10HW or less for the same period 4.6k HW errors is crazy.when all my other units have like 10 That is not normal ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) each machine is different people keep telling you that it does not matter at these numbers (OK, you will have 0.001% error instead of 0.0001% error). Pool's luck will literally have 1000-10000X larger effect on your hashing.
|
|
|
|
opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2015, 07:42:19 PM |
|
Yes, its what I recommend. I understand with these fans an S5 will run quiet and cool. Will the stock fans run equally cool albeit louder? Stock will likely still be cooler as its just a crazy amount of cooling. The advantage of SP120s is they are much quieter while still keeping the S5 in an acceptable temp range at most ambient temps. But then again the user netcoingeek indicated two different fans completely and keeping temps 60-62. We need real world environment to see which fans really work before spending any money on them. Is anyone here currently using the Corsair high pressure static fans now? Also, are there screw holes on the other end of the box to install a fan and is there an extra fan connector inside the miner to connect to? Is it a PWM connector that controls the fan?
|
|
|
|
opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2015, 07:46:01 PM |
|
Yes, its what I recommend. I understand with these fans an S5 will run quiet and cool. Will the stock fans run equally cool albeit louder? Stock will likely still be cooler as its just a crazy amount of cooling. The advantage of SP120s is they are much quieter while still keeping the S5 in an acceptable temp range at most ambient temps. So would you use 2 SP120's in a push-pull? I currently run an s5 with 2 Noctua NF-F12 iPPC 3000rpm fans in push-pull, would the SP120s provide better performance? That's my recommendation. NF-F12s will run cooler but will be quite a bit louder. Dogie, you just recommended the SP120's just a couple pages back. I don't get it?
|
|
|
|
coinits
Legendary
Offline
Activity: 1582
Merit: 1019
011110000110110101110010
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2015, 08:25:56 PM |
|
Were somebody able to get this miner working with Nicehash with the p=... option? I set the password for p=.... and the machine simply doesn't start to mine. All 3 pools looks alive but no hashing.
Yes I have it working for me. It is showing as dead most of the time because I have it set p=0.015 but I do get some work from it. https://i.imgur.com/ZVcMVFA.jpgThe problem with mine is that not shows the pool as dead. It's still shows alive. Were you just simply wrote p=0.0.15?What kind of firmware do you use? What is strange that I have 20 S5-s and all has the same problem.... you have an extra decimal - thats your problem. right now typical payment is at p=0.0108 .... its advised that you set it to something like p=0.012 so that the pool is only active when worthwhile good catch
|
Jump you fuckers! | The thing about smart motherfuckers is they sound like crazy motherfuckers to dumb motherfuckers. | My sig space for rent for 0.01 btc per week.
|
|
|
ElGabo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2015, 08:29:14 PM |
|
Were somebody able to get this miner working with Nicehash with the p=... option? I set the password for p=.... and the machine simply doesn't start to mine. All 3 pools looks alive but no hashing.
Yes I have it working for me. It is showing as dead most of the time because I have it set p=0.015 but I do get some work from it. https://i.imgur.com/ZVcMVFA.jpgThe problem with mine is that not shows the pool as dead. It's still shows alive. Were you just simply wrote p=0.0.15?What kind of firmware do you use? What is strange that I have 20 S5-s and all has the same problem.... you have an extra decimal - thats your problem. right now typical payment is at p=0.0108 .... its advised that you set it to something like p=0.012 so that the pool is only active when worthwhile good catch It was a typo in the post. Please read the first post on this page. Any help would apriciated
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
ElGabo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2015, 08:40:06 PM |
|
Were somebody able to get this miner working with Nicehash with the p=... option? I set the password for p=.... and the machine simply doesn't start to mine. All 3 pools looks alive but no hashing.
Yes I have it working for me. It is showing as dead most of the time because I have it set p=0.015 but I do get some work from it. https://i.imgur.com/ZVcMVFA.jpgThe problem with mine is that not shows the pool as dead. It's still shows alive. Were you just simply wrote p=0.0.15?What kind of firmware do you use? What is strange that I have 20 S5-s and all has the same problem.... you have an extra decimal - thats your problem. right now typical payment is at p=0.0108 .... its advised that you set it to something like p=0.012 so that the pool is only active when worthwhile good catch It was a typo in the post. Please read the first post on this page. Any help would apriciated Do you have it looking like this? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F3NyP7to.png&t=665&c=UGofxpXk2XenEQ) Yes.... The only difference: stratum+tcp://stratum.nicehash.com:3334#xnsub All my S3-s and sp20-s working fine only the s5-s not. If I remove the #xnsub they are working but no extranonce support.
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
lex_minutor
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 79
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 02, 2015, 01:22:36 AM |
|
Yes, its what I recommend. I understand with these fans an S5 will run quiet and cool. Will the stock fans run equally cool albeit louder? Stock will likely still be cooler as its just a crazy amount of cooling. The advantage of SP120s is they are much quieter while still keeping the S5 in an acceptable temp range at most ambient temps. But then again the user netcoingeek indicated two different fans completely and keeping temps 60-62. We need real world environment to see which fans really work before spending any money on them. Is anyone here currently using the Corsair high pressure static fans now? Also, are there screw holes on the other end of the box to install a fan and is there an extra fan connector inside the miner to connect to? Is it a PWM connector that controls the fan? There are holes on the back side of the miner to connect a 120mm fan to it. Actually both the front and back plates are exactly the same, just that the "front" one has the controller with LAN and LEDs. There are 2 PWM connectors on the controller. Though the web interface has indicators for 4 fans, are the other 2 the 3pin ones on the side?
|
|
|
|
lex_minutor
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 79
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 02, 2015, 03:42:47 AM |
|
Yes, its what I recommend. I understand with these fans an S5 will run quiet and cool. Will the stock fans run equally cool albeit louder? Stock will likely still be cooler as its just a crazy amount of cooling. The advantage of SP120s is they are much quieter while still keeping the S5 in an acceptable temp range at most ambient temps. So would you use 2 SP120's in a push-pull? I currently run an s5 with 2 Noctua NF-F12 iPPC 3000rpm fans in push-pull, would the SP120s provide better performance? That's my recommendation. NF-F12s will run cooler but will be quite a bit louder. Dogie, you just recommended the SP120's just a couple pages back. I don't get it? I have the NF-F12s running now and I am getting some SP120s tomorrow so I will do a comparison and let you guys know.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4228
Merit: 8458
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 02, 2015, 03:50:43 AM |
|
Were somebody able to get this miner working with Nicehash with the p=... option? I set the password for p=.... and the machine simply doesn't start to mine. All 3 pools looks alive but no hashing.
Yes I have it working for me. It is showing as dead most of the time because I have it set p=0.015 but I do get some work from it. https://i.imgur.com/ZVcMVFA.jpgThe problem with mine is that not shows the pool as dead. It's still shows alive. Were you just simply wrote p=0.0.15?What kind of firmware do you use? What is strange that I have 20 S5-s and all has the same problem.... you have an extra decimal - thats your problem. right now typical payment is at p=0.0108 .... its advised that you set it to something like p=0.012 so that the pool is only active when worthwhile good catch It was a typo in the post. Please read the first post on this page. Any help would apriciated Do you have it looking like this? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F3NyP7to.png&t=665&c=UGofxpXk2XenEQ) Yes.... The only difference: stratum+tcp://stratum.nicehash.com:3334#xnsub All my S3-s and sp20-s working fine only the s5-s not. If I remove the #xnsub they are working but no extranonce support. it is a bug that floats around I had 12 sp20's one or 2 just work work with it. and some that use it act truly weird . and then 8 work great. all have the same software. so i am not sure why your s-5 is not good but I can say the sp20's don't all do it right.
|
|
|
|
ElGabo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 02, 2015, 09:18:40 AM |
|
Were somebody able to get this miner working with Nicehash with the p=... option? I set the password for p=.... and the machine simply doesn't start to mine. All 3 pools looks alive but no hashing.
Yes I have it working for me. It is showing as dead most of the time because I have it set p=0.015 but I do get some work from it. The problem with mine is that not shows the pool as dead. It's still shows alive. Were you just simply wrote p=0.0.15?What kind of firmware do you use? What is strange that I have 20 S5-s and all has the same problem.... you have an extra decimal - thats your problem. right now typical payment is at p=0.0108 .... its advised that you set it to something like p=0.012 so that the pool is only active when worthwhile good catch It was a typo in the post. Please read the first post on this page. Any help would apriciated Do you have it looking like this? Yes.... The only difference: stratum+tcp://stratum.nicehash.com:3334#xnsub All my S3-s and sp20-s working fine only the s5-s not. If I remove the #xnsub they are working but no extranonce support. it is a bug that floats around I had 12 sp20's one or 2 just work work with it. and some that use it act truly weird . and then 8 work great. all have the same software. so i am not sure why your s-5 is not good but I can say the sp20's don't all do it right. That's weird....
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 02, 2015, 11:39:49 AM |
|
Yes, its what I recommend. I understand with these fans an S5 will run quiet and cool. Will the stock fans run equally cool albeit louder? Stock will likely still be cooler as its just a crazy amount of cooling. The advantage of SP120s is they are much quieter while still keeping the S5 in an acceptable temp range at most ambient temps. So would you use 2 SP120's in a push-pull? I currently run an s5 with 2 Noctua NF-F12 iPPC 3000rpm fans in push-pull, would the SP120s provide better performance? That's my recommendation. NF-F12s will run cooler but will be quite a bit louder. Dogie, you just recommended the SP120's just a couple pages back. I don't get it? SP120s are a better balance of noise and performance. F12s are louder fans, even if they do move a bit more air.
|
|
|
|
tutorialevideo
Legendary
Offline
Activity: 1161
Merit: 1001
Don`t invest more than you can afford to lose
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 02, 2015, 01:07:28 PM |
|
any new s5 on SALE bitmain?
|
|
|
|
|