Bloodys
Newbie
Offline
Activity: 32
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 30, 2015, 04:05:33 PM Last edit: January 30, 2015, 04:16:13 PM by Bloodys |
|
My two cents sent ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Transaction id: e8620e3cfa28d2a88766af5fc83b82d3599f22e4c5736a1b97fa2a0b6d7c2b38 Keep up the good work Djm34.
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 30, 2015, 07:10:46 PM Last edit: January 31, 2015, 12:00:03 AM by scryptr |
|
DJM34 --
The latest version of the miner runs well on my Win 7 x64 machine. I get 230+ kh/s on my GTX 960; this is about 1.5X the reported rate for a 750ti. Any big load on my i7 CPU slows down the mining, however.
Unfortunately, on my Ubuntu 14.04 rig, the only results I get are "segmentation fault". The miner boots, binds 6 theads to my 6 750ti cards, and I get at most one kh/s reading that is reasonable, sometimes followed by insanely high kh/s readouts, then the segmentation fault. Sometimes I just get the segmentation fault, sans any other output.
I hope things smooth out, I appreciate your hard work. If I could get some compilation tips, it may be an issue resolvable on my end. I plan to reload my 14.04 system this weekend, using default paths for the drivers. CUDA 6.5 toolkit does not support Utopic Unicorn. --scryptr
|
|
|
|
djm34 (OP)
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 30, 2015, 08:26:06 PM |
|
DJM34 --
The latest version of the miner runs well on my Win 7 x64 machine. I get 230+ kh/s on my GTX 960; this is about 1.5X the reported rate for a 750ti. Any big load on my i7 CPU slows down the mining, however.
Unfortunately, on my Ubuntu 14.04 rig, the only results I get are "segmentation fault". The miner boots, binds 6 theads to my 6 750ti cards, and I get at most one kh/s reading that is reasonable, sometimes followed by insanely high kh/s readouts, then the segmentation fault. Sometimes I just get the segmentation fault, sans any other output.
I hope things smooth out, I appreciate your hard work. If I could get some compilation tips, it may be an issue resolvable on my end. I plan to move to 14.10 this weekend, using default paths for the drivers. --scryptr
I am going to have a look into that... (you are not the first to report the problem, unfortunately...)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
frazier34567
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 95
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 02, 2015, 05:58:24 PM |
|
I am running 5 EVGA 750 ti SC no OC and if I try to do a throughput of 2 or 3.5 (Even did the 2,2,2,2,2) it gives me about 40-70% rejection rate. The submission seem to come faster but the number in boo's is really high and the hash rate is lower than throughput 1.
Windows 8.1 Professional Neoscrypt miner beta 3
|
|
|
|
djm34 (OP)
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 02, 2015, 06:29:03 PM |
|
I am running 5 EVGA 750 ti SC no OC and if I try to do a throughput of 2 or 3.5 (Even did the 2,2,2,2,2) it gives me about 40-70% rejection rate. The submission seem to come faster but the number in boo's is really high and the hash rate is lower than throughput 1.
Windows 8.1 Professional Neoscrypt miner beta 3
how is handled the pagefile ? pagefile usage can be pretty big, I don't know if this could explain that Also it can be a problem with the pool itself ? (my reject rate is close to 0% on blockfactory) can you show me your command line ? may-be something wrong here
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
frazier34567
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 95
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 02, 2015, 11:11:04 PM |
|
I am running 5 EVGA 750 ti SC no OC and if I try to do a throughput of 2 or 3.5 (Even did the 2,2,2,2,2) it gives me about 40-70% rejection rate. The submission seem to come faster but the number in boo's is really high and the hash rate is lower than throughput 1.
Windows 8.1 Professional Neoscrypt miner beta 3
how is handled the pagefile ? pagefile usage can be pretty big, I don't know if this could explain that Also it can be a problem with the pool itself ? (my reject rate is close to 0% on blockfactory) can you show me your command line ? may-be something wrong here Happens on both YAAMP and NiceHash. ccminer.exe -a neoscrypt -o stratum+tcp://yaamp.com:4233 -u BTCaddress -p 2 -d 0,1,2,4,5 --throughput 2,2,2,2,2 I put debugging on it it says Share above target. [17:07:37] Starting NiceHash NeoScrypt with C:\cudaminer\neoscrypt\lyra2\lyra\ccminer.exe -a neoscrypt -o stratum+tcp://stratum.nicehash.com:3341 -u BTCaddress -p x -d 0,1,2,4,5 --throughput 2,2,2,2,2 -D [2015-02-02 17:07:38] 5 miner threads started, using 'neoscrypt' algorithm. [2015-02-02 17:07:38] Starting Stratum on stratum+tcp://stratum.nicehash.com:3341 [2015-02-02 17:07:39] Failed to get Stratum session id [2015-02-02 17:07:39] Stratum difficulty set to 64 [2015-02-02 17:07:40] DEBUG: job_id='1c7' extranonce2=0000 ntime=54d00338 [2015-02-02 17:07:40] Stratum detected new block [2015-02-02 17:07:41] GPU #1: GeForce GTX 750 Ti, 27.49 khash/s [2015-02-02 17:07:42] GPU #0: GeForce GTX 750 Ti, 27.33 khash/s [2015-02-02 17:07:43] GPU #4: GeForce GTX 750 Ti, 14.22 khash/s [2015-02-02 17:07:43] GPU #5: GeForce GTX 750 Ti, 10.74 khash/s [2015-02-02 17:07:43] GPU #2: GeForce GTX 750 Ti, 10.48 khash/s [2015-02-02 17:07:44] GPU #1: GeForce GTX 750 Ti, 140.98 khash/s [2015-02-02 17:07:44] accepted: 0/1 (0.00%), 203.75 kh/s (203.75 +/- 0.00) (booooo) [2015-02-02 17:07:44] DEBUG: reject reason: Share above target. [2015-02-02 17:07:46] GPU #0: GeForce GTX 750 Ti, 143.94 khash/s [2015-02-02 17:07:46] accepted: 1/2 (50.00%), 320.35 kh/s (262.05 +/- 58.30) (yay!!!) [2015-02-02 17:07:48] GPU #5: GeForce GTX 750 Ti, 150.07 khash/s [2015-02-02 17:07:48] GPU #2: GeForce GTX 750 Ti, 148.58 khash/s [2015-02-02 17:07:49] GPU #4: GeForce GTX 750 Ti, 148.18 khash/s [2015-02-02 17:07:49] GPU #1: GeForce GTX 750 Ti, 147.68 khash/s [2015-02-02 17:07:49] accepted: 2/3 (66.67%), 738.45 kh/s (420.85 +/- 229.57) (yay!!!) [2015-02-02 17:07:51] GPU #4: GeForce GTX 750 Ti, 137.59 khash/s [2015-02-02 17:07:51] accepted: 2/4 (50.00%), 727.86 kh/s (497.60 +/- 239.16) (booooo) [2015-02-02 17:07:51] DEBUG: reject reason: Share above target. [2015-02-02 17:07:52] GPU #1: GeForce GTX 750 Ti, 142.83 khash/s [2015-02-02 17:07:53] accepted: 3/5 (60.00%), 723.00 kh/s (542.68 +/- 232.14) (yay!!!) [2015-02-02 17:07:54] GPU #0: GeForce GTX 750 Ti, 144.32 khash/s [2015-02-02 17:07:54] GPU #5: GeForce GTX 750 Ti, 148.95 khash/s [2015-02-02 17:07:54] accepted: 3/6 (50.00%), 722.25 kh/s (572.61 +/- 222.23) (booooo) [2015-02-02 17:07:54] DEBUG: reject reason: Share above target. [2015-02-02 17:07:55] DEBUG: job_id='1ca' extranonce2=0000 ntime=54d0034b [2015-02-02 17:07:55] Stratum detected new block [2015-02-02 17:07:55] GPU #4: GeForce GTX 750 Ti, 150.51 khash/s [2015-02-02 17:07:55] GPU #0: GeForce GTX 750 Ti, 146.39 khash/s [2015-02-02 17:07:55] GPU #2: GeForce GTX 750 Ti, 147.98 khash/s [2015-02-02 17:07:55] GPU #1: GeForce GTX 750 Ti, 148.76 khash/s [2015-02-02 17:07:55] GPU #5: GeForce GTX 750 Ti, 128.99 khash/s [2015-02-02 17:07:55] accepted: 3/7 (42.86%), 722.64 kh/s (594.04 +/- 212.34) (booooo) [2015-02-02 17:07:55] DEBUG: reject reason: Share above target. [2015-02-02 17:07:55] accepted: 3/8 (37.50%), 722.64 kh/s (610.12 +/- 203.12) (booooo) [2015-02-02 17:07:55] DEBUG: reject reason: Share above target. [2015-02-02 17:08:01] GPU #1: GeForce GTX 750 Ti, 145.18 khash/s [2015-02-02 17:08:01] GPU #4: GeForce GTX 750 Ti, 145.94 khash/s [2015-02-02 17:08:01] accepted: 4/9 (44.44%), 714.48 kh/s (621.72 +/- 194.30) (yay!!!) [2015-02-02 17:08:01] accepted: 5/10 (50.00%), 714.48 kh/s (630.99 +/- 186.41) (yay!!!) [2015-02-02 17:08:06] GPU #1: GeForce GTX 750 Ti, 146.01 khash/s [2015-02-02 17:08:06] accepted: 5/11 (45.45%), 715.32 kh/s (638.66 +/- 179.38) (booooo) [2015-02-02 17:08:06] DEBUG: reject reason: Share above target.
|
|
|
|
djm34 (OP)
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 03, 2015, 12:33:46 AM |
|
I am running 5 EVGA 750 ti SC no OC and if I try to do a throughput of 2 or 3.5 (Even did the 2,2,2,2,2) it gives me about 40-70% rejection rate. The submission seem to come faster but the number in boo's is really high and the hash rate is lower than throughput 1.
Windows 8.1 Professional Neoscrypt miner beta 3
how is handled the pagefile ? pagefile usage can be pretty big, I don't know if this could explain that Also it can be a problem with the pool itself ? (my reject rate is close to 0% on blockfactory) can you show me your command line ? may-be something wrong here Happens on both YAAMP and NiceHash. ccminer.exe -a neoscrypt -o stratum+tcp://yaamp.com:4233 -u BTCaddress -p 2 -d 0,1,2,4,5 --throughput 2,2,2,2,2 I put debugging on it it says Share above target. use --diff 0.5 (just tried on nicehash works like a charm) when there are lots of reject, it is usually a difficulty issue... (by you should probably use throughput 3 or 3.5 (2 seems a bit extreme)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
frazier34567
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 95
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 03, 2015, 12:48:57 AM |
|
Happens on both YAAMP and NiceHash.
ccminer.exe -a neoscrypt -o stratum+tcp://yaamp.com:4233 -u BTCaddress -p 2 -d 0,1,2,4,5 --throughput 2,2,2,2,2
I put debugging on it it says Share above target.
use --diff 0.5 (just tried on nicehash works like a charm) when there are lots of reject, it is usually a difficulty issue... (by you should probably use throughput 3 or 3.5 (2 seems a bit extreme) Put it at --diff 0.4 and 3.5 for throughput. It is running well. 742-747 per accepted share
|
|
|
|
djm34 (OP)
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 04, 2015, 01:00:48 AM |
|
the good news:
new speed: gtx980: 665kh/s gtx780ti: 355kh/s gtx750ti: 160kh/s will be out soon
The bad news: Still struggling to get the linux version working (might have to do a full check, which isn't easy with kopiemtu as it reboot on its own from time to time)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
chrysophylax
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 04, 2015, 02:11:27 AM |
|
the good news:
new speed: gtx980: 665kh/s gtx780ti: 355kh/s gtx750ti: 160kh/s will be out soon
The bad news: Still struggling to get the linux version working (might have to do a full check, which isn't easy with kopiemtu as it reboot on its own from time to time)
djm ... i can setup a system specifically for YOU under fedora that only YOU have access to if you like ... ssh and screen are amazing little tools in linux ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) ... you will have full security and accessibility with the machine - no one else ... that way you can test and rebuild and do what is required whenever you require ... i would prefer a direct build of the miner and only you can supply it - as im not the only miner out there that runs everything from fedora or redhat based system ... let me know ... #crysx
|
|
|
|
djm34 (OP)
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 04, 2015, 04:55:26 PM |
|
ok, I have finally a working linux version (based on sp/tpruvot release...)
For the moment, it will come in 2 flavors: kopiemtu (tested on my computer by without compute_52 support) and Ubuntu 14.04 latest cuda 6.5 with gtx900 support.
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
StuffOfInterest
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2015, 11:17:50 AM |
|
Latest windows release from yesterday (I'm calling it neo4) is giving more boos than yays on both WestHash and YAAMP. Here is my launch command: ccminer.exe -q -r 3 -R 10 --throughput 3 -a neoscrypt -o stratum+tcp://yaamp.com:4233 -u [myaddress] -p 1
It did show a slight increase in reported speed. Quick console dump: [2015-02-05 06:13:18] Starting Stratum on stratum+tcp://yaamp.com:4233 [2015-02-05 06:13:18] 2 miner threads started, using 'neoscrypt' algorithm. [2015-02-05 06:13:21] accepted: 0/1 (0.00%), 293.32 kh/s (293.32 +/- 0.00) (booooo) [2015-02-05 06:13:24] accepted: 0/2 (0.00%), 338.83 kh/s (316.07 +/- 22.75) (booooo) [2015-02-05 06:13:25] accepted: 0/3 (0.00%), 330.98 kh/s (321.04 +/- 19.86) (booooo) [2015-02-05 06:13:26] accepted: 0/4 (0.00%), 338.69 kh/s (325.45 +/- 18.82) (booooo) [2015-02-05 06:13:27] accepted: 1/5 (20.00%), 322.87 kh/s (324.94 +/- 16.87) (yay!!!) [2015-02-05 06:13:28] accepted: 1/6 (16.67%), 296.28 kh/s (320.16 +/- 18.74) (booooo) [2015-02-05 06:13:35] accepted: 1/7 (14.29%), 325.64 kh/s (320.95 +/- 17.45) (booooo) [2015-02-05 06:13:37] accepted: 1/8 (12.50%), 344.54 kh/s (323.89 +/- 18.09) (booooo) [2015-02-05 06:13:39] accepted: 1/9 (11.11%), 347.33 kh/s (326.50 +/- 18.58) (booooo)
|
|
|
|
djm34 (OP)
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2015, 11:28:20 AM |
|
Latest windows release from yesterday (I'm calling it neo4) is giving more boos than yays on both WestHash and YAAMP. Here is my launch command: ccminer.exe -q -r 3 -R 10 --throughput 3 -a neoscrypt -o stratum+tcp://yaamp.com:4233 -u [myaddress] -p 1
It did show a slight increase in reported speed. Quick console dump: [2015-02-05 06:13:18] Starting Stratum on stratum+tcp://yaamp.com:4233 [2015-02-05 06:13:18] 2 miner threads started, using 'neoscrypt' algorithm. [2015-02-05 06:13:21] accepted: 0/1 (0.00%), 293.32 kh/s (293.32 +/- 0.00) (booooo) [2015-02-05 06:13:24] accepted: 0/2 (0.00%), 338.83 kh/s (316.07 +/- 22.75) (booooo) [2015-02-05 06:13:25] accepted: 0/3 (0.00%), 330.98 kh/s (321.04 +/- 19.86) (booooo) [2015-02-05 06:13:26] accepted: 0/4 (0.00%), 338.69 kh/s (325.45 +/- 18.82) (booooo) [2015-02-05 06:13:27] accepted: 1/5 (20.00%), 322.87 kh/s (324.94 +/- 16.87) (yay!!!) [2015-02-05 06:13:28] accepted: 1/6 (16.67%), 296.28 kh/s (320.16 +/- 18.74) (booooo) [2015-02-05 06:13:35] accepted: 1/7 (14.29%), 325.64 kh/s (320.95 +/- 17.45) (booooo) [2015-02-05 06:13:37] accepted: 1/8 (12.50%), 344.54 kh/s (323.89 +/- 18.09) (booooo) [2015-02-05 06:13:39] accepted: 1/9 (11.11%), 347.33 kh/s (326.50 +/- 18.58) (booooo)
this was reported previously, try using --diff 0.5 (the current difficulty is too low)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
StuffOfInterest
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2015, 12:16:09 PM |
|
Latest windows release from yesterday (I'm calling it neo4) is giving more boos than yays on both WestHash and YAAMP. Here is my launch command: ccminer.exe -q -r 3 -R 10 --throughput 3 -a neoscrypt -o stratum+tcp://yaamp.com:4233 -u [myaddress] -p 1
It did show a slight increase in reported speed. Quick console dump: [2015-02-05 06:13:18] Starting Stratum on stratum+tcp://yaamp.com:4233 [2015-02-05 06:13:18] 2 miner threads started, using 'neoscrypt' algorithm. [2015-02-05 06:13:21] accepted: 0/1 (0.00%), 293.32 kh/s (293.32 +/- 0.00) (booooo) [2015-02-05 06:13:24] accepted: 0/2 (0.00%), 338.83 kh/s (316.07 +/- 22.75) (booooo) [2015-02-05 06:13:25] accepted: 0/3 (0.00%), 330.98 kh/s (321.04 +/- 19.86) (booooo) [2015-02-05 06:13:26] accepted: 0/4 (0.00%), 338.69 kh/s (325.45 +/- 18.82) (booooo) [2015-02-05 06:13:27] accepted: 1/5 (20.00%), 322.87 kh/s (324.94 +/- 16.87) (yay!!!) [2015-02-05 06:13:28] accepted: 1/6 (16.67%), 296.28 kh/s (320.16 +/- 18.74) (booooo) [2015-02-05 06:13:35] accepted: 1/7 (14.29%), 325.64 kh/s (320.95 +/- 17.45) (booooo) [2015-02-05 06:13:37] accepted: 1/8 (12.50%), 344.54 kh/s (323.89 +/- 18.09) (booooo) [2015-02-05 06:13:39] accepted: 1/9 (11.11%), 347.33 kh/s (326.50 +/- 18.58) (booooo)
this was reported previously, try using --diff 0.5 (the current difficulty is too low) Much happier. Thanks. Now running about 331 kh/s on 2 x eVGA 750 Ti SC cards at stock speed.
|
|
|
|
blue-yu
Newbie
Offline
Activity: 58
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2015, 03:56:35 PM |
|
Hey, how to give this miner a try? Donate some btc, and then what? Download? Compile? Git?
|
|
|
|
djm34 (OP)
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2015, 04:59:54 PM |
|
Hey, how to give this miner a try? Donate some btc, and then what? Download? Compile? Git?
right now, you need to donate at least 0.02btc to the address in my signature, then I will give you the exe (windows or linux)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
blue-yu
Newbie
Offline
Activity: 58
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 05, 2015, 08:01:56 PM |
|
Great. 20 mBTC sent to You. I personaly still mine quark, but You send me exe for linux (kopiemtu) just to test and wait until neoscrypt mining is better then quark.
BR...
|
|
|
|
AliassailA
Newbie
Offline
Activity: 50
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2015, 05:50:41 AM |
|
Hey 20mBTC sent for windows exe Transaction ID: 9fee6bfd6f0898222cde199f01222ccfa081e3c32467a842564f8d415cdbc6d4
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3164
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2015, 10:29:05 AM |
|
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fs26.postimg.org%2Fu1ml07j51%2Flyra.jpg&t=665&c=dmkdurQlo_-fvw) Latest lyra. Still on the 750ti ..the one that has the video out hooked up for this computer ...low hash. But it will have 450kh/s if I put it on my rig. For some reason the hash is very low on the card that has video out used. My rig has no video out hooked up so it will give 450kh/s per 750ti no over clocking. I'll try on my rig later.
|
|
|
|
djm34 (OP)
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 06, 2015, 11:10:06 AM |
|
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fs26.postimg.org%2Fu1ml07j51%2Flyra.jpg&t=665&c=dmkdurQlo_-fvw) Latest lyra. Still on the 750ti ..the one that has the video out hooked up for this computer ...low hash. But it will have 450kh/s if I put it on my rig. For some reason the hash is very low on the card that has video out used. My rig has no video out hooked up so it will give 450kh/s per 750ti no over clocking. I'll try on my rig later. the driver of that card has probably crashed at some point. You should reboot your rig. If it isn't enough try also to add --throughput 3
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
|