420 (OP)
|
|
August 02, 2012, 12:56:20 AM Last edit: August 04, 2012, 09:21:09 AM by 420 |
|
If you've come looking for the settings: Use Sapphire Trixx to set clock 747mhz, memory 249, it takes a lot of clicking to reduce the memory so far, PM for details, stock voltage may work Make sure it is applied to all 5970 cards, hopefully is. otherwise, try opening msi afterburner on top, this also has better fan control
CGMiner 2.6.1 settings: -i 9 -v 2 -w 256 -k diablo --failover-only
Plugged into Radeon as 2nd display, black desktop BG, to reduce gpu usage, had to do this or else CGMiner can't display temperatures and control fan speed itself for the Radeons
@840Mhz/240 memory: 980 watts at the wall 2200Mhash+ (733 per card)
|
Donations: 1JVhKjUKSjBd7fPXQJsBs5P3Yphk38AqPr - TIPS the hacks, the hacks, secure your bits!
|
|
|
420 (OP)
|
|
August 02, 2012, 01:05:48 AM |
|
Got it working GUIMINER. now what flags for me to get 300Mhash up to the standard 320Mhash I should be getting per core?
|
Donations: 1JVhKjUKSjBd7fPXQJsBs5P3Yphk38AqPr - TIPS the hacks, the hacks, secure your bits!
|
|
|
ChanceCoats123
|
|
August 02, 2012, 01:29:48 AM |
|
I would try -w 64, -w 128 and -w 256 and see which responds the best and gives you the best hashing power.
Also, add -v without a value.
|
|
|
|
420 (OP)
|
|
August 02, 2012, 01:51:26 AM |
|
I would try -w 64, -w 128 and -w 256 and see which responds the best and gives you the best hashing power.
Also, add -v without a value.
128 yields the best, with the -v both I already had tested now installed msi afterburner but it has the sliders locked and no lists of any of them Also I'd rather use a program with a backup Pool list haven't got CGMiner working yet
|
Donations: 1JVhKjUKSjBd7fPXQJsBs5P3Yphk38AqPr - TIPS the hacks, the hacks, secure your bits!
|
|
|
ChanceCoats123
|
|
August 02, 2012, 01:55:38 AM |
|
You mentioned the onboard video, it's AMD onboard, right? If it's intel or nvidia onboard video, then there may be a driver conflict.
Have you tried just using one of the 5970's for video just to see if that works?
|
|
|
|
420 (OP)
|
|
August 02, 2012, 02:01:02 AM |
|
You mentioned the onboard video, it's AMD onboard, right? If it's intel or nvidia onboard video, then there may be a driver conflict.
Have you tried just using one of the 5970's for video just to see if that works?
don't want to do that and the fan's aren't kicking up enough guess i'll try using one as gpu fuck
|
Donations: 1JVhKjUKSjBd7fPXQJsBs5P3Yphk38AqPr - TIPS the hacks, the hacks, secure your bits!
|
|
|
ChanceCoats123
|
|
August 02, 2012, 02:10:45 AM |
|
You don't need to keep it that way, I just want to see if it's a driver issue (where neither the onboard nor the gpu work for mining) or a hardware setup issue where the onboard doesn't work, but a gpu does. It might still be a driver problem even if the gpu does work.
|
|
|
|
420 (OP)
|
|
August 02, 2012, 02:13:47 AM |
|
You don't need to keep it that way, I just want to see if it's a driver issue (where neither the onboard nor the gpu work for mining) or a hardware setup issue where the onboard doesn't work, but a gpu does. It might still be a driver problem even if the gpu does work.
overclock working with display plugged into one of the radeon's i think gets me 2-4 less Mhash on that core changed the title of the thread
|
Donations: 1JVhKjUKSjBd7fPXQJsBs5P3Yphk38AqPr - TIPS the hacks, the hacks, secure your bits!
|
|
|
ChanceCoats123
|
|
August 02, 2012, 02:29:41 AM |
|
Now, I don't have a whole lot of experience with 5970's (and when I said not a whole lot, I mean none), but I do have a few 5870's and they are basically the same thing.
So when you used the gpu, did all of the cores show up in the miner? When I say that, I mean were you able to mine successfully on all 6 cores once you used one of the graphics cards?
|
|
|
|
420 (OP)
|
|
August 02, 2012, 02:39:01 AM |
|
Now, I don't have a whole lot of experience with 5970's (and when I said not a whole lot, I mean none), but I do have a few 5870's and they are basically the same thing.
So when you used the gpu, did all of the cores show up in the miner? When I say that, I mean were you able to mine successfully on all 6 cores once you used one of the graphics cards?
yes sir getting 1.9ghash with OpenCL miners in GUIMINER -v -w 128, CPU Affinity none (doesn't affect mHash) Phoenix Miner is slower
|
Donations: 1JVhKjUKSjBd7fPXQJsBs5P3Yphk38AqPr - TIPS the hacks, the hacks, secure your bits!
|
|
|
ChanceCoats123
|
|
August 02, 2012, 02:42:42 AM |
|
Have you tried CGminer now that all the gpu cores are working?
What are your gpu clocks? I don't think you'll hit 667mhash/card at stock clocks. (But like I said, I don't have experience with the 5970's.)
|
|
|
|
420 (OP)
|
|
August 02, 2012, 02:45:22 AM |
|
Have you tried CGminer now that all the gpu cores are working?
What are your gpu clocks? I don't think you'll hit 667mhash/card at stock clocks. (But like I said, I don't have experience with the 5970's.)
CGminer alone or thru GUImINER? through guiminer it's only getting 290mhash, i dont know what flags i should be using by itself i just basically looked a the conf file and the program isn't running
|
Donations: 1JVhKjUKSjBd7fPXQJsBs5P3Yphk38AqPr - TIPS the hacks, the hacks, secure your bits!
|
|
|
|
420 (OP)
|
|
August 02, 2012, 03:55:45 AM |
|
Anyone else? I need optimum CGMiner settings
only reaching 1700Mhash now on default with memory 240mhz, baseclock supposed to be 720 but its still 725
|
Donations: 1JVhKjUKSjBd7fPXQJsBs5P3Yphk38AqPr - TIPS the hacks, the hacks, secure your bits!
|
|
|
Cablez
Legendary
Offline
Activity: 1400
Merit: 1000
I owe my soul to the Bitcoin code...
|
|
August 02, 2012, 04:20:18 AM |
|
Why are you using SDK 2.7 on a tri 5970 rig? Best results will be with SDK 2.5.
As for cgminer from memory it was -w 256 -k phatk --failover-only with clocks of 800/300 worked well I believe.
|
Tired of substandard power distribution in your ASIC setup??? Chris' Custom Cablez will get you sorted out right! No job too hard so PM me for a quote Check my products or ask a question here: https://bitcointalk.org/index.php?topic=74397.0
|
|
|
420 (OP)
|
|
August 02, 2012, 04:31:50 AM Last edit: August 02, 2012, 04:42:12 AM by 420 |
|
Why are you using SDK 2.7 on a tri 5970 rig? Best results will be with SDK 2.5.
As for cgminer from memory it was -w 256 -k phatk --failover-only with clocks of 800/300 worked well I believe.
If I use those settings in a .bat file will cgminer still load the core and memory settings from the conf file? [those settings get me 1770Mhash] with BAMT i found 246mem/738 core (1:3 ratio) was best, and got me 2060mhash total also heard any changes to core in cgminer settings requires a restart
|
Donations: 1JVhKjUKSjBd7fPXQJsBs5P3Yphk38AqPr - TIPS the hacks, the hacks, secure your bits!
|
|
|
ChanceCoats123
|
|
August 02, 2012, 04:40:43 AM |
|
Hey 420, do you have AIM or a similar chat method? I can clear some of those questions up right quick via a chatting program like AIM (I'm actually on right now).
|
|
|
|
420 (OP)
|
|
August 02, 2012, 04:44:57 AM |
|
Hey 420, do you have AIM or a similar chat method? I can clear some of those questions up right quick via a chatting program like AIM (I'm actually on right now).
here, don't need a password http://alfixturedesign.com/420/
|
Donations: 1JVhKjUKSjBd7fPXQJsBs5P3Yphk38AqPr - TIPS the hacks, the hacks, secure your bits!
|
|
|
Cablez
Legendary
Offline
Activity: 1400
Merit: 1000
I owe my soul to the Bitcoin code...
|
|
August 02, 2012, 12:53:43 PM |
|
Why are you using SDK 2.7 on a tri 5970 rig? Best results will be with SDK 2.5.
As for cgminer from memory it was -w 256 -k phatk --failover-only with clocks of 800/300 worked well I believe.
If I use those settings in a .bat file will cgminer still load the core and memory settings from the conf file? [those settings get me 1770Mhash] with BAMT i found 246mem/738 core (1:3 ratio) was best, and got me 2060mhash total also heard any changes to core in cgminer settings requires a restart If you are going to use a batch file you might as well setup everything in it just for simplicities sake. Then you can add all to the conf file when it works how you want. You can change most settings within the cgminer suite without a restart as it has a menu system. I still think you should dial back the SDK on 5 series hardware though.
|
Tired of substandard power distribution in your ASIC setup??? Chris' Custom Cablez will get you sorted out right! No job too hard so PM me for a quote Check my products or ask a question here: https://bitcointalk.org/index.php?topic=74397.0
|
|
|
ChanceCoats123
|
|
August 02, 2012, 02:50:34 PM |
|
Last night we got him back on sdk 2.5 after an uninstall and wipe of the 2.7 sdk. Didn't help mhash as much as I'd expected. :/
|
|
|
|
|