Welcome to Drillbit Systems
Avalon boards available here: http://drillbitsystem.com/shop/bitcoin-miners/avalon-16-by-drillbit-systems/
DRILLBIT BOARDS AVAILABLE: 0
DRILLBIT THUMBS AVAILABLE: Temp NA
DRILLBIT MINIPLANES AVAILABLE: 6
Newly updated pricingUpdate: Batch 1 and Batch 2 will be produced and shipped together. There will be no delay between the two batches.Price Drop on all Drillbit Systems Hardware!
Drillbit Thumb 2.7 GH/s
- TEMP NA
Drillbit 8 Board 21.7 GH/s
Drillbit Miniplane - $30
Drillbit Double Scroll - $30 Batch 2 now openAll orders please go to http://drillbitsystem.com/order.html
Fill in the form and send BTC to this address: 1EjYjTXBub3iy88hPgmMbh2Ap1m4HwXisx
All orders are expected to ship in early November.
Currently only accepting BTC payments.
BITFURY 55nm ASIC chips, Demonstrated performance 2.7 GH/sec @ 0.835V (0.8W/Ghps)
Early chance to get on board with next generation chips 10 times more powerful than Avalon chips.
Introducing the DrillBit System
An affordable and expandable bitcoin mining system.
The DrillBit system is the most versatile Bitcoin mining system available. It will expand to suit your needs. You can start up with a small mining rig, similar to many entry level rigs on the market, or you can start bigger. As you decide to expand your hashing capabilities, the DrillBit system will expand to suit your requirements, easily and simply.
The basic module of the DrillBit system is a single DrillBit board; an 8 BITFURY ASIC card. With a hashrate of approximately 21.6 GH per card (based on BITFURY's published spec of 2.7Gh/s per ASIC), the board plugs into a standard USB socket. The power can be supplied by a normal ATX power supply. If you are only running a single board, it may also be powered from a spare disc drive connector, allowing you to install it out of sight, inside your computer, should you wish to. You can be hashing all the time, with no extra boxes to stash, no cords to trip over and accidentally unplug.
The DrillBit board runs as a standalone miner, so you are ready to start mining as soon as you get it, nothing more required. But when you want to add more hashing power, this is where the DrillBit system really shows its advantages over other systems. If you want to double your hashrate to 43.2GH, just get another Drillbit Board and plug it into the 4 stack Miniplane (free with orders of two or more boards). Its that simple. No big strings of USB hubs, no messy cables or setup changes. The data distribution card automatically registers the extra ASIC card and operates accordingly. Up to 4 cards can be stacked in this way. Simple, convenient, efficient. Just add more processing power when you want to. You can then be running at 86.4GH quite easily, expanded up from your initial investment of 21.6GH. Nothing to resell, nothing going unused.
If you wish to expand beyond 4 DrillBit boards to achieve even higher hashrates, the DrillBit system can accomodate this also with the miniplane system. The miniplane is a distribution board that the ASIC cards plug into individually. We are also looking at a Megaplane wich will take stacks of up to 4 Miniplanes. So if you want to run much higher hashrates, you can get a megaplane and fill it with ASIC cards as you decide to buy them.. The same principle applies. Simple and efficient. You just plug in extra cards, and the system configures to the extra power. All versions of the system run conveniently from a standard ATX power supply, so it is easy to operate. You could also just run a number of card stacks from a USB hub, in much the same way as other systems offer, if you so desire. Or you could run multiple backplane systems from the same setup. With 16 cards in a backplane, you will have up to 345.6GH/s of hashing power.
Thats more than any other single miner on the market at this time. But the beauty of the DrillBit system is that you don't have to outlay all that cash immediately. You can get started on a smaller system of whatever size you like, and build as you are ready.
** A note on the hashing power of BITFURY chips. The chips have been demonstrated to have performance up to 2.7 Gh/s. This is what you can get if you overclock and run them at very high temperatures. The sweetspot for efficiency of W/Gh is more somewhere around 2 GH/s. We will have more info on this once we get more testing done.
The Drillbit board is designed with overclocking capabilities built in, so you will have control over how hard you run the chips. We will provide specs for recommended stable running rate, but in the end if you want to squeeze every last hash out it it, you will be able to so.
We will also be offering a thumbdrive version of the Drillbit System comprised of 1 chip, giving you up to 2.7 Gh/s. These will be nice and cheap. Pricing soon.
The DrillBit system is designed by Dan Stocks, an electronics phd with 30+ years in electronic design, highly experienced PCB designer, currently doing it as a full time job for a well known electronics manufacturing company.Feature set
ASIC core voltage adjustable in 4 steps. Set through software interface.
Prototype has external clocking of the ASIC. We are investigating this as no one has published any spec for this mode of operation. It might give better GH/W performance. It isnt possible to tell until we test it. The external clocking chip is good for speeds of up to 2.7GH or so.
Depending on the performance this may or may not be on the production version. The pads for the chip & associated parts will still be there even if we don't include it so any keen experimenters could add it themselves.
There are button pads on the back. If anyone feels like soldering the buttons on then they can have a manual ASIC core voltage up/down and core clock rate up/downFeature set
Drillbit 8 board
4 step ASIC core voltage adjustable. Can be software adjusted or by pushbuttons.
Power supply rated to heavy overclocking capabilities. can supply over 24A @ 0.9V (= 3A/ chip!). This is easily enough that the most severe overclocking power requirements will be met.
The core adjust feature is prototype development, it will likely be a production feature but may delete it if it turns out to be necessary.
About this Group Buy
We are based in Sydney Australia, but accept orders worldwide. If you are located in Australia, this is a fantastic opportunity to get your hands on locally built quality miners, saving on shipping costs and helping build the Australian Bitcoin network. Assembly and production will be done either here in Sydney or San Francisco or both. Postage within Australia will be cheaper than any other board assembly offers out there. For our international participants, don’t worry, we will make affordable shipping options for all.
We are currently in prototyping stage for the DrillBit system. The board design is done and sample chips are here. You will find regular updates here with the progress.
Once we have raised enough funds, an order will be placed with BITFURY. For those purchasing only the chips, they will be sent on as soon as they are received. For those buying fully assembled miners, we will begin production of the boards as soon as we have the chips, and get them to you soon after that. We want you all mining as quick as possible.
We will also be offering standalone boards for those who desire to assemble their own chips, these will come along with chip purchases or on their own for those of you who already have your own chips.
PricingFULLY ASSEMBLED BOARDS:
- Drillbit 8 Board - NA
- Drillbit Thumb - $130
- Drillbit Miniplane - $30
- Standalone Chips - $30
- Blank 8 chip Drillbit Board (not including chips or assembly) - 1-5 boards - $25 each, 5+ boards - $20 each
Notes on pricing:
- All pirices are in USD
- Payments can be made only in BTC.
- Go to: http://drillbitsystem.com/order.html to place your order.
- Processing of orders will be done on a first in first served basis. The earlier you place your order with us, the earlier we will process your order and get it to you.
25. The Beast
33. nexus 99
|41. It's About Sharing |
42. Liberty Buck
67. southern gentuk
80. HTML5 Gordon
90. Guardian of Forever
114. Dyslexic Zombei
130. Product Recall
|0-500g||500g - 1kg||1kg - 1.5kg||1.5kg - 2kg||2kg - 2.5kg||2.5kg - 3kg|
|United States |
|Regular - $25|
Express - $60
|Regular - $40|
Express - $70
|Regular - $50|
|Regular - $65|
Express - $85
|Regular - $75|
Express - $105
|Regular - $80|
Express - $105
|Europe||Regular - $25|
Express - $65
|Regular - $45|
Express - $75
|Regular - $65|
Express - $95
|Regular - $80|
Express - $95
|Regular - $95|
Express - $115
|Regular - $100|
Express - $115
- Full payment including all USD based fees is required prior to shipment to final destination.
- Address signing is required for dispute settlement.
- We assume no responsibility for any issues that may arise due to circumstances outside our control, including but not limited to BITFURY failing to ship, shipment being seized by customs, shipment arriving late, etc.
- All chips purchased are sold AS IS, with no warranty of any kind.
- You may choose to change your address a maximum of two times.
- In order to change your shipping address you must sign the change order with the purchase address.
Go to http://drillbitsystem.com/order.html
to make payments in BTC.
Batch 1 assembly payments to: 1AF1WmU9Ut2CMuMJWgeBiXb2LMCd6x1GYA
All Batch 2 payments to: 1EjYjTXBub3iy88hPgmMbh2Ap1m4HwXisx*Note* Do not send funds from an address you do not control. You will be required to prove ownership of the sending address upon request.If you have any questions, please feel free to PM me.Looking forward to doing business with you all. Lets get these miners going.