i can install vs2015 and try to compile, but i don't remeber now all the things needed, aside from cuda 8 and vs2015 what else is needed? all the dependencies i mean
to compile with cuda 7.5 or older you need vs2013. vs2015 isn't supported. Don't know for cuda 8.
|
|
|
show proof at least, anyway he pushed it to much, he can adjust the core to consume 150w while maintaining a good compromise
Yes, I tried to see what it can at max. For a long run I use another settings ... and another coin )))
|
|
|
Mine is SuperJetstream with Samsung memory. They already have bios with increased TDP so they can OC better. Plus in palit thunderstorm utility you can raise gddr memory voltage to achieve better memory OC. actually the 480 does that at a max of 150 watts, 180 watts is just too much for my PSU's
Actually i didn't do correct wattage measurements from the wall. I rely to nvidia software readings ... So I guess it is 170-180watt. I know that bios mod for rx480 can push it to 32mhs eth but only in single mode and no less then 180watt with crazy temps.
|
|
|
lyra2 and lyra2v2 are "doesn't validate on cpu" with latest 372.53 drivers, win7, gtx1070 Nanashi version also broken.
Neoscrypt is feeling good and easily goes > 1.1mhs.
|
|
|
180 watt for 29 eth and 780 sia is bad rx 480 does around 26 eth and 470 sia for half the price , that is if you can find any rx 480 lol
Yes, it is not so spectaculars as in lbry or lyra2v2 but it is 30+780 against 26+470 with the same power usage. Now I stop with (31.6eth+630sia)@2050/2400@0.975v. Doubt that rx480 can come near even with bios mods.
|
|
|
gtx1070 (palit) with new driver and new claymore, win7 tdp 170(180??) + 14% gpu 2037-2125 mem 2400 dcri 80: 29.8 eth + 780 sia dcri 70: 30.8 eth + 720 sia dcri 60: 31.5 eth + 630 sia dcri 50: 32 eth + 530 sia dcri 50: 32.2 eth + 430 sia dcri 40: 32.4 eth + 324 sia
performance is TDP limited! ETH only 33mhs, with voltage add
If there is a good tdp unlocked bios then it will be possible to have 33mhs+330 sia
|
|
|
Getting 2 mh/s with my 980ti. Suggestions?
driver version 372.54
install older driver for Maxwell
|
|
|
what will be the consumption then? maybe at -1000 it become unstable
no problem with stability but helps to squeeze some extra gpu core mhz.
|
|
|
well i feel dumb - just realised my cards have been running for over a week without gpu-tweak running in the background as i had thought it was. I'm now pushing a lot better hashrates!
card1: 2038core(+231), 0.990v, 8380mem (+779), 65C, 110% power target, 60% fans = 281 MH card2: 1924core(+209), 0.925v, 8344mem (+752), 69C, 96% power target, 66% fans = 260 MH
there is no need to oc memory for lbry, better to downclock it as much as possible (-1000).
|
|
|
gtx1070 doesn't work on win 7 with "old" driver. Need to install Titan-x driver but don't want )) Will wait for official wddm 2.1 driver
|
|
|
It comes as sources only and requires cuda 8 toolkit to be installed (( My nvidia developer subscription is expired so I cannot download cuda 8 RC and build new nanashi version (( That's weird as I wanted the sources and downloaded the windows binary instead by mistake. use the link to OneDrive above but cancel download. Then choose the last download in the list from OneDrive. There will be 1.8 r2 shame on me ... found some binaries ... will try
|
|
|
i don't think it work that way, because the 980ti can do only 14MH, but yes i also think a 1070 might do 20MH, but 40MH seems too much
I was able to get 15mh from gtx1070 with high oc on old miner. It is very bad. Good miner will do 30+ easily but again ... this coin is dead ... no need to bother.
|
|
|
It comes as sources only and requires cuda 8 toolkit to be installed (( My nvidia developer subscription is expired so I cannot download cuda 8 RC and build new nanashi version ((
|
|
|
if it was optimized for a 1070 it would be very profitable, should be at least 15MH per card, so the profit would be like lbry at least
gtx750 can do > 4mh. gtx1070 roughly 5-10 times faster then gtx750 so the good speed should be 20-40 ))
|
|
|
it was a short pump for xcn on polo, it was rather good to mine it with gtx750 using lowmem ccminer by djm. Now xcn is dead again ))
|
|
|
2 Eliovp
I see this mod is possible due to patched atikmdag.sys and requires win10 in "test" mode with signature enforcement disabled. Will this also work with win7/8.1? Will we just need the patched atikmdag.sys from win7 driver package?
|
|
|
1060 is garbage due to lousy memory bus.
|
|
|
Did someone already test the speeds on most popular cards?
didn't work on my 290x with 15.7.1 driver. Driver always crashes. Decided not to waste time on it.
|
|
|
Interesting , which clock did you reach such speed on 2126mhz. Then the card (with 170watt tdp in bios) even with +114% in afterburner is power limited to go higher. And I am afraid to flash unlimited bios ... the card is with 8pin only, on warranty and rather expensive.
|
|
|
you can earn 20cents per day with your cpu mining if you 1. learn howto use nicehash without nicehash miner 2. learn howto to compile and run cpuminer-opt 3. learn howto undervolt your cpu with Intel XTU
And then nevertheless it will be the risk that your laptop will die due overheating or big power usage 24/7 Is it worth to? You to decide ))
|
|
|
|