CCminer(SP-MOD) Modded GPU kernels.

[bensam1231]

will just ignore what sp said, i could be impolite again, fyi i got in total 0.02 btc for a 33% boost (and not even from bensam who asked it, like steem actually)

nvm i hope at least my work helped klaus to finalize his version...

If you're talking about your SIA miner, it's a 12% improvement over the GO miner, which brings it up to par with ETH on a 970. If I can't get anywhere close to ROI it's not something people will pay for most of the time (hence why people are saying .2 BTC is too high for SPs miner). I don't know what you're capable of in terms of improvements, SIA has huge volume flowing through it. It still does. If it hit close to a 33% improvement over the GO miner, there would probably be a lot of people purchasing it or at least looking at it. It would be close to the income of Lbry right now.


BTW not really sure what's happening with Lbry right now, but difficulty jumped up by +600GH. You'll make about as much mining it then ETH at the moment. Someone with a big farm has no idea what they're doing. Probably a big Eth-baby that got a hold of Wolfs AMD miner.

Nvidia dagger driver fix couldn't come sooner.

[giagge]

yiimp pool lbry offline!!! .

Epsylon3 seems offline at the moment, suggesting there's some issue with his connection right now.
His downtimes are usually pretty brief though...

Offline 1 hour and 30 minutes .

[tbearhere]

yiimp pool lbry offline!!! .

Epsylon3 seems offline at the moment, suggesting there's some issue with his connection right now.
His downtimes are usually pretty brief though...

Offline 1 hour and 30 minutes .

SP where are you ... pools down.
Epsylon3  opps was in a hurry.

[pallas]

yiimp pool lbry offline!!! .

Epsylon3 seems offline at the moment, suggesting there's some issue with his connection right now.
His downtimes are usually pretty brief though...

Offline 1 hour and 30 minutes .

SP where are you ... pools down.

SP_ !!!!!!======= Epsylon3 :-D

[Slava_K]

Pool again online. 

[Epsylon3]

Yep sorry, never seen that, second big power cut in the area this year The ups worked 30mn but i had to power off properly then

[tbearhere]

yiimp pool lbry offline!!! .

Epsylon3 seems offline at the moment, suggesting there's some issue with his connection right now.
His downtimes are usually pretty brief though...

Offline 1 hour and 30 minutes .

SP where are you ... pools down.
Epsylon3

SP_ !!!!!!======= Epsylon3 :-D

Opps was in a hurry 

[tbearhere]

Anyone know where djm34 is? Maybe hes using  the other me ?

[scryptr]

Anyone know where djm34 is? Maybe hes using  the other me ?

DJM34 MUST BE QUIET--

Haven't seen him in a while.  His M7 branch CCminer (Cryptonite, XCN) could use some optimization.  It runs, but it hasn't been touched since early 2015.  It could be optimized for Maxwell, and Pascal, and given the API fetures and stuff.  Or, blended into Epsylon3's release.

Is everyone afraid to touch it?       --scryptr

[Amph]

Anyone know where djm34 is? Maybe hes using  the other me ?

DJM34 MUST BE QUIET--

Haven't seen him in a while.  His M7 branch CCminer (Cryptonite, XCN) could use some optimization.  It runs, but it hasn't been touched since early 2015.  It could be optimized for Maxwell, and Pascal, and given the API fetures and stuff.  Or, blended into Epsylon3's release.

Is everyone afraid to touch it?       --scryptr

criptonote for pascal is pretty bad at the moment, running at 350 for a 1070, when it should be like 800, clearly not optimized

[pallas]

Anyone know where djm34 is? Maybe hes using  the other me ?

DJM34 MUST BE QUIET--

Haven't seen him in a while.  His M7 branch CCminer (Cryptonite, XCN) could use some optimization.  It runs, but it hasn't been touched since early 2015.  It could be optimized for Maxwell, and Pascal, and given the API fetures and stuff.  Or, blended into Epsylon3's release.

Is everyone afraid to touch it?       --scryptr

criptonote for pascal is pretty bad at the moment, running at 350 for a 1070, when it should be like 800, clearly not optimized

Cryptonite (M7) is not cryptonight.

[Amph]

Anyone know where djm34 is? Maybe hes using  the other me ?

DJM34 MUST BE QUIET--

Haven't seen him in a while.  His M7 branch CCminer (Cryptonite, XCN) could use some optimization.  It runs, but it hasn't been touched since early 2015.  It could be optimized for Maxwell, and Pascal, and given the API fetures and stuff.  Or, blended into Epsylon3's release.

Is everyone afraid to touch it?       --scryptr

criptonote for pascal is pretty bad at the moment, running at 350 for a 1070, when it should be like 800, clearly not optimized

Cryptonite (M7) is not cryptonight.

i mean cryptonight yes, bad typo, the one of monero, it's called also cryptonote i always confuse that...

[scryptr]

Anyone know where djm34 is? Maybe hes using  the other me ?

DJM34 MUST BE QUIET--

Haven't seen him in a while.  His M7 branch CCminer (Cryptonite, XCN) could use some optimization.  It runs, but it hasn't been touched since early 2015.  It could be optimized for Maxwell, and Pascal, and given the API fetures and stuff.  Or, blended into Epsylon3's release.

Is everyone afraid to touch it?       --scryptr

criptonote for pascal is pretty bad at the moment, running at 350 for a 1070, when it should be like 800, clearly not optimized

Cryptonite (M7) is not cryptonight.

i mean cryptonight yes, bad typo, the one of monero, it's called also cryptonote i always confuse that...

CRYPTONITE (XCN)  USES M7 ALGO--

And the various currencies and algos are confusing.  I never bothered to mine XCN until I got questioned about it in another thread.  My 980ti gets 11.5MH/s with the CudaMiner XCN miner, and 14MH/s on DJM34's CCminer M7 branch.  Right now, I am trying to figure out whether it earns as much as Library Credits (LBC).  I am positive that optimization of M7 algo code for Maxwell and Pascal would significantly increase the hash rate.  Claymore's fee-based AMD miner reportedly gets 9MH/s on a 290X, haven't tried it yet.  He gets a 5% feee, and just updated the miner to v2.2 for Win10 and etc.

And, to add to the confusion, what is this M7M algo?  CPU only, I think...       --scryptr

[Amph]

Anyone know where djm34 is? Maybe hes using  the other me ?

DJM34 MUST BE QUIET--

Haven't seen him in a while.  His M7 branch CCminer (Cryptonite, XCN) could use some optimization.  It runs, but it hasn't been touched since early 2015.  It could be optimized for Maxwell, and Pascal, and given the API fetures and stuff.  Or, blended into Epsylon3's release.

Is everyone afraid to touch it?       --scryptr

criptonote for pascal is pretty bad at the moment, running at 350 for a 1070, when it should be like 800, clearly not optimized

Cryptonite (M7) is not cryptonight.

i mean cryptonight yes, bad typo, the one of monero, it's called also cryptonote i always confuse that...

CRYPTONITE (XCN)  USES M7 ALGO--

And the various currencies and algos are confusing.  I never bothered to mine XCN until I got questioned about it in another thread.  My 980ti gets 11.5MH/s with the CudaMiner XCN miner, and 14MH/s on DJM34's CCminer M7 branch.  Right now, I am trying to figure out whether it earns as much as Library Credits (LBC).  I am positive that optimization of M7 algo code for Maxwell and Pascal would significantly increase the hash rate.  Claymore's fee-based AMD miner reportedly gets 9MH/s on a 290X, haven't tried it yet.  He gets a 5% feee, and just updated the miner to v2.2 for Win10 and etc.

And, to add to the confusion, what is this M7M algo?  CPU only, I think...       --scryptr

ah yes m7 algo, i remember i mined that long time ago in 2014, i thought it was dead already, i need to check the hashrate with a 1070

m7m is for magi a cpu only coin it seems

p.s. do you have the release for this, i can not compile at the moment, i want to see how much hashrate one 1070 do with the m7 algo

ok i tried, not optimized at all, getting 12MH with 100-120w consumption...also very unstable, bottom 50MH+ top was 72MH

[rednoW]

it was a short pump for xcn on polo, it was rather good to mine it with gtx750 using lowmem ccminer by djm. Now xcn is dead again ))

[Amph]

if it was optimized for a 1070 it would be very profitable, should be at least 15MH per card, so the profit would be like lbry at least

[rednoW]

if it was optimized for a 1070 it would be very profitable, should be at least 15MH per card, so the profit would be like lbry at least

gtx750 can do > 4mh. gtx1070 roughly 5-10 times faster then gtx750 so the good speed should be 20-40 ))

[Amph]

if it was optimized for a 1070 it would be very profitable, should be at least 15MH per card, so the profit would be like lbry at least

gtx750 can do > 4mh. gtx1070 roughly 5-10 times faster then gtx750 so the good speed should be 20-40 ))

i don't think it work that way, because the 980ti can do only 14MH, but yes i also think a 1070 might do 20MH, but 40MH seems too much

[scryptr]

Anyone know where djm34 is? Maybe hes using  the other me ?

DJM34 MUST BE QUIET--

Haven't seen him in a while.  His M7 branch CCminer (Cryptonite, XCN) could use some optimization.  It runs, but it hasn't been touched since early 2015.  It could be optimized for Maxwell, and Pascal, and given the API fetures and stuff.  Or, blended into Epsylon3's release.

Is everyone afraid to touch it?       --scryptr

criptonote for pascal is pretty bad at the moment, running at 350 for a 1070, when it should be like 800, clearly not optimized

Cryptonite (M7) is not cryptonight.

i mean cryptonight yes, bad typo, the one of monero, it's called also cryptonote i always confuse that...

CRYPTONITE (XCN)  USES M7 ALGO--

And the various currencies and algos are confusing.  I never bothered to mine XCN until I got questioned about it in another thread.  My 980ti gets 11.5MH/s with the CudaMiner XCN miner, and 14MH/s on DJM34's CCminer M7 branch.  Right now, I am trying to figure out whether it earns as much as Library Credits (LBC).  I am positive that optimization of M7 algo code for Maxwell and Pascal would significantly increase the hash rate.  Claymore's fee-based AMD miner reportedly gets 9MH/s on a 290X, haven't tried it yet.  He gets a 5% feee, and just updated the miner to v2.2 for Win10 and etc.

And, to add to the confusion, what is this M7M algo?  CPU only, I think...       --scryptr

ah yes m7 algo, i remember i mined that long time ago in 2014, i thought it was dead already, i need to check the hashrate with a 1070

m7m is for magi a cpu only coin it seems

p.s. do you have the release for this, i can not compile at the moment, i want to see how much hashrate one 1070 do with the m7 algo

ok i tried, not optimized at all, getting 12MH with 100-120w consumption

I TRIED TO COMPILE DJM34's CCMINER IN LINUX--

I also got a compile error.  I believe it was coded for CUDA 6.5, and I have a CUDA 7.5 environment.  The links for the compiled Windows versions work at 1GH.com, the CryptoMining-Blog links are dead.  I would appreciate any coder's advice in how to get a Linux compile from the source at DJM34's github.  "It should compile with any version of CUDA 6.5+", was posted somewhere.  The source there does not include a "build.sh" file, and the code must be compiled with "./autogen.sh", followed by "./configure", and finally, "make".  I'd appreciate a "build.sh" that gets the job done.

CryptoNite (XCN) just had a major value spike.  Miners and traders are still interested.       --scryptr

[Amph]

there is definitely big profit for nvidia on m7 algo, if it can be added as a main algo, would be good

maybe we can rise a donation for this