|
I think the problem may be due to saving the settings & working in read only mode.
Since it is read only mode, new features may not be able to save & giving problem.
Have to test with NO read only.
Also, i now removed read only , added a client, removed a client & saved settings again with 1.31, hoping new save will make 1.31 work with out crash.
Also, now running with NO read only.
|
|
|
|
|
I don't know what happened.
But after trying 1.32 & 1.4 & 1.4 a, now even 1.31 crashes every 20-30 minutes.
Also, crash makes program to hang showing restarting cmd window.
Until manually close restarting window, mining is not happening.
I don't know, how i am going to sleep, coz miner may crash & won't mine at all.
|
|
|
|
Hi! It's been a while since I've started using PR! Just having issues with my ISP's IP addresses being banned from the forum, I had to use proxy servers just to read threads here. =)
I think we should have a feature request, would that be asking a lot? =)
The whole idea is that the only thing that we'll launch is you're GUI.
Here's the list:
1. Temperature display (VRM, Core, Memory) OSD (since you were already able to tap into the temp control)
-addendum: Clock throttling to a certain profile when a temp is reached like for example, at night temps are cold, we could OC to like 911/300 5850 stock volts, but during daytime noontime when temps reach like 85-90C on core, it would throttle down to like 860/300.
2. Overclocking tool (like set the clocks at start/when the Run button is pressed)
3. Fan Speed display
4. GPU Core, Memory, VRM Clocks display
5. Maybe the Withdraw button for pools that support it (Same as with GUIminer)
6. Maybe the Miner Stats reporting (like the Widget) where in we enter the API Json from the pool and we get stats like current exchange rate, pool has rate, miner hash rate, BTC earned, workers, etc.
I would say a lot of us here is going to support you (donations, mine at you're suggested pools, bounty etc.)
We couldn't be even more thankful for all your work. =)
I would happily beta test your app!
Most of the things u asked already in Afterburner. Adding all these things to MINER will make it BLOAT-WARE & can cause severe performance decrease & mining efficiency. Also, Its always good to use more than one tool, which will give space to work easily. |
|
|
|
1.4a also gives same problem.  1.31 working fine.  |
|
|
|
|
No comments.
Some secrets must stay secret only, to protect everything
I never used/use alcohol.
|
|
|
|
|
Tried again downloading 1.4. Same error, no mining.
Also the pr.log shows everything correctly.
I don't know why not mining at all. hope some one will try & reply.
|
|
|
|
|
I ran PR1.4. It does nothing. It says it starts miners by showing cmd windows & closing, but NO PHONEIX.EXE runs in task manager & no OSD & NO MINING AT ALL.
It shows everything as mining , but without mining actually.
Check it. Again going back to 1.31
Please, add tabbed interface SOOOOOOOOON.
With 6 clients, i actually can't able to see last client, due to now added pause, temp....
Only way to see, is to delete last 3 clients which i don't use now from phoenix.ini after taking backup of phoenix.ini.
|
|
|
|
If you knew anything about statistics, Atroxes, you'd know that even right now there's already a good chance his pool finds a few blocks in a row, 51% is a myth.
Even with 40% he will get 6 blocks in a row 0.41% of the time meaning he only needs 244 attempts to succeed once. Is that in any way shape or form good for the health and security of Bitcoin? I seriously doubt Satoshi would be happy if he saw a client have this much of the total hashing speed, and it even arguably defeats the whole point of mining.
EDIT: And I understand that everyone is participating voluntarily it's just that I don't want to see us suffer even a single fraud attack which could potentially bring the whole thing down.
What if [Tycho] is really Satoshi Nakamoto himself ? I am the one, who accused directly that [Tycho] "WILL" bring down Bitcoin. http://forum.bitcoin.org/index.php?topic=9090But, the working style, speed, quick response, non stop increase in pool size, still he is BELOW 50% for the past 2-3 months, I think it is Satoshi Nakamoto himself running deepbit.net in alias form, [Tycho], so that NO OTHERS take down the bitcoin. If some one like US govt, try to take down bitcoin then any one think that Satoshi Nakamoto will just sit & do nothing? With the power of pool size [Tycho] has Satoshi Nakamoto can easily with out much effort can make bitcoin stay forever, who ever, what ever times attack bitcoin, to bring down bitcoin. Am i right? Some secrets must stay secret only, to protect everything. |
|
|
|
|
Thanks.
Seems, exactly the same as you mentioned.
I had only one 1 GB graphics card before, & now i added another graphics ward with 1GB.
2 cards in my PC now, Zotac 9400GT 1GB & Sapphire HD 6870 1GB.
|
|
|
|
|
I have windows 7 Ultimate, 32 bit only. I tested & ran with this file, Phoenix Rising 1.32 x32.exe.
The other file, Phoenix Rising 1.32.exe, gives me the following error,
"The version of this file is not compatible with the version of Windows you're running. Check your Computer's information..............................."
|
|
|
|
@toast have you registered first? After registration, use "bmc.py user" to show your user id & write it down somewhere & also backup the file ".blackmarket3.rsa" , it comes with a DOT before characters to some safe location. This file has your user id & also ur passphrase(password) in encrypted form. Loosing this file makes you loose everything you bought in glbse.com Its similar to wallet.dat in bitcoin client. Only after registration you can buy shares. But, if you got the error only after registering then contact " doctor.nefario@gmail.com" with your USER ID from bmc with your problem. Also deposit takes time to show up as it waits for at least 6 confirmations of block chain. |
|
|
|
|
I was aware that windows x86 only supports up to 3GB RAM even if you have more RAM installed.
I have 2 PC, in one PC, 2*2GB RAM is installed & In another PC, 1*4GB RAM is installed.
I am suing windows 7, 32 bit since it is released & have seen my memory in Mycomputers->properties that windows shows, 4.00GB (2.97 GB usable).
I also tried tweaks which enabled x86 to use up to 128GB RAM.
But now after some updates & also after sp1 update, RAM in BOTH system shows 4.00GB(2.00GB usable).
First i thought 1 RAM was fault, but not now, coz another PC has only single piece 4GB RAM & half of it can't go bad physically.
I uninstalled & reinstalled & again uninstalled SP1 & also most of the updates prior to SP1.
But still, i can see only 2GB RAM instead of 2.97GB RAM in both my PC.
Also, interesting thing is i never saw windows rounding up & showing.
Instead of 1.98 or something, it shows exactly 2 GB RAM usable.
Anyone using Windows 7, 32 bit(x86) also faces similar problem?
If not can you please give me your screen shot of installed updates, so that i can compare & find what update causing this STUPID behavior of windows.
|
|
|
|
|
I tired with 1.32 new now for hang testing.
I killed one phoenix.exe in task manager & it was restarted correctly, but with 4-5 retries of showing cmd windows restarting.
I did it only one time, so not sure.
Besides, yesterday night, i got strange problem.
I used 1.32 which u gave before, i never used your GUI, actually i was not aware a GUI for phoenix with phatk exists.
1.32 gave restart hang. So, i tried with 1.31 & at the same time i updated windows 7 32 bit to sp1.
After installing sp1, even 1.31 gave hang problem. So i uninstalled sp1 & then 1.31 worked fine by correctly restarting.
I think the new sp1 interfering with PR.
So, ask others also to uninstall sp1, if they have upgraded to sp1 & try with 1.32
EDIT:
Just know one miner crashed itself & after 4-5 restarts it restarted.
But it seems miner crashes itself with new version.
Within 10 minutes, 2 miners crashed.
So going back to 1.31 as my SH won't happy if i mine less.
|
|
|
|
Isn't the concept kind of strange in that regard?
1 share is 1 btc, so the price of a share went from 5 dollars to 18 dollars. So the price of the share doesn't fluctuate with the value of the company or the demand for the share but with the price of bitcoins. So in theory people should only buy shares whenever the bitcoin exchange rate is 'low'?
If you buy bitcoins when price is low, then it will profit you. But not when you buy shares. coz whenever you buy a share, the price is 1btc only. but if u don't have bitcoin to buy a share, then you need to buy bitcoins when bitcoins price is low. Most of my share holders have their own miner & already have bitcoins. They are buying my shares to help me rise & also they get profit. |
|
|
|
So I bought one share, what can I expect now?  1 share is 1btc. The profit you may get is 0.20btc or less for every month. Buying one share is useless, unless you bought it to sell after all my shares sold out. Out of 2000 shares, i issued 1000 shares & remaining shares is 283, thats 717 shares sold so far. So, after all my shares sold, you can take profit or sell shares for higher price. |
|
|
|
Afterburner i am using to read temp now. The order of device number is also different. GPU1 temp in Afterburner = Device 6 temp GPU2 temp in Afterburner = Device 0 temp GPU3 temp in Afterburner = Device 3 temp  |
|
|
|
I need some feedback on how well my temperature monitor is working (AMD/ATI GPUs only). http://www.mediafire.com/?oyd7tj6ezvebaizDoes it list both the slot the GPUs are plugged in and the temperature correctly? Also, is Device 0 the one in first slot, Device 1 the GPU in the next-filled slot, etc.? What I mean is, for example, I'm using slot 0 and 3, and Device 0 is the one in slot 0, Device 1 is the one in slot 3. Is the Device Number always incremented like that? It displays wrongly. I have 3 cards in pcie_1, pcie_2 & pcie_3 slot thats Device 0,1 & 2, but temperature monitor shows as Device 0 temperature, Device 3 temperature & Device 6 temperature. Only device number is wrong. But shows temperature correctly for each device. |
|
|
|
Im noticing a bug where the miner doesnt always restart. it Just hangs with a blank command line window open and its stay hung until i close the window the the miner restarts. any body else seen this? i tested on 10 machines and 8 had the bug with in 8 hrs
I too have same problem in 1.32 |
|
|
|
|
Show Posts
