Anyone have update to fall creators on windows 10 ? have improvement ? .
I just tried it. Radeon settings would crash system, I didn't spend too much time investigating why, I just reinstalled Blockchain drivers.
|
|
|
I'm going to say risers. Those things always cause problems and are the weakest link. Since it reboots in 30 minutes it shouldn't be to hard to track down which one. Just use the -di option to disable say 3 cards. If it crashes, then enable the 3 you disabled and then disable a different set. Keep going until you narrow it down to just one card that causes the system to crash. It's either that card or that riser.
^THIS! Been there, done that.
|
|
|
That's 30,000%, or 300 times.
|
|
|
I have been running my 1 x 56 for a little while now and I'm pretty happy. Gonna build a 4 x 56 rig. Any recommendations for the Mobo?
I just built 4 of those rigs, all are Asrock H81 Pro BTC r2.0. Works great and not too expensive now.
|
|
|
I followed this guide exactly, only with 4 cards per rig, and it works perfectly. Highly recommended.
|
|
|
Looking to try any new straps for Sapphire Nitro+ RX 580 (11265-01-20G) with HYNIX memory.
Using PE 1.6.1 Good Hynix Mining strap at 2000 and 2250 only gets 765 (stable, no mem errors ever) at 1250/2250 for XMR.
What Hynix type do you have?... H5GQ8H24MJ
|
|
|
Looking to try any new straps for Sapphire Nitro+ RX 580 (11265-01-20G) with HYNIX memory.
Using PE 1.6.1 Good Hynix Mining strap at 2000 and 2250 only gets 765 (stable, no mem errors ever) at 1250/2250 for XMR.
Well, no thanks to anyone here, but I've managed to mod the ROM and get 833 (stable) at 1210/2180 for XMR with Claymore 10.2. set GPU_MAX_ALLOC_PERCENT 100 set GPU_USE_SYNC_OBJECTS 1 set GPU_MAX_HEAP_SIZE 100 set GPU_SINGLE_ALLOC_PERCENT 100 set GPU_FORCE_64BIT_PTR 1 NsGpuCNMiner.exe -xpool ssl://monerohash.com:9999 -xwal <XMRADDRESS> -xpsw x -di 0123 -dmem 1 -h 1024 -tt 80 -tstop 95 -cclock 1200,1210,1210,1210 -mclock 2160,2180,2180,2180 -cvddc 904 -mvddc 904
|
|
|
Looking to try any new straps for Sapphire Nitro+ RX 580 (11265-01-20G) with HYNIX memory.
Using PE 1.6.1 Good Hynix Mining strap at 2000 and 2250 only gets 765 (stable, no mem errors ever) at 1250/2250 for XMR.
|
|
|
Updated: Tools and drivers version
your Polaris Bios Editor 1.6.2 link, stinks.
|
|
|
Hey claymore lets tell us whats the speed for vega 56 and 64
I don't OC GPUs and use stock bios, don't enable HBCC, etc, so I get low speeds. For example, I see 1140H/s for stock Vega64. That's bad. You'll see 2-thread gain with HBCC only ((( HBCC can be enabled easy with blockchain drivers. But if you have Frontier - that is a problem )) For HBCC enabled with Vega56 or Vega64 be sure you have enough virtual memory, make clean uninstall of drivers (I used amd utiity), install blockchain drivers again, you will see HBCC slider in Gaming section Hmm, Vega56 shows about 1400H/s in stock. So it seems Vega56 is faster than Vega64 for my PoW implementation. I really need more time to find the reason, so I will release new version in several hours and then will spend more time for Vega. Claymore, how did you get Vega56 to 1400H/s? No matter what I try I can't get above 1 KH/s
|
|
|
same error as above GpuMiner dk2an0 failed -4
if I add -h 832 to the config half the cards stop erroring. I really don't understand how this works. I have a mix of RX 570 / 580s 4gb and 8gb
One difference I noticed between v9.7 and 10.1 is that the order of the cards is different. That is critical for those of us with different models of cards. If you used your old settings for clock and memory, that is a likely suspect.
|
|
|
Trying this out for win 7-64, 16384 swap file, 8gb sys RAM, Sapphire Nitro+ RX 580 GB (11265-01-20G), AMD driver 17.7.1,
-xpool ssl://monerohash.com:9999 -xwal <address> -xpsw x -di 0123 -dmem 0 -tt 80 -tstop 95 -cclock 1225 -mclock 2250 -cvddc 950 -mvddc 950
with Claymore 9.7 avg. 740 KH/s with Claymore 10 beta 380 KH/s
any ideas? AMD Driver maybe?
-h 1024 YES! you are correct, that did it. now avg. 765 H/s Hmm, my sapphire nitro+ rx480 8G got 870 h/s Mine are Hynix memory
|
|
|
Trying this out for win 7-64, 16384 swap file, 8gb sys RAM, Sapphire Nitro+ RX 580 GB (11265-01-20G), AMD driver 17.7.1,
-xpool ssl://monerohash.com:9999 -xwal <address> -xpsw x -di 0123 -dmem 0 -tt 80 -tstop 95 -cclock 1225 -mclock 2250 -cvddc 950 -mvddc 950
with Claymore 9.7 avg. 740 KH/s with Claymore 10 beta 380 KH/s
any ideas? AMD Driver maybe?
-h 1024 YES! you are correct, that did it. now avg. 765 H/s, auto selection (-h 0) was choosing too high, 1800
|
|
|
Trying this out for win 7-64, 16384 swap file, 8gb sys RAM, Sapphire Nitro+ RX 580 GB (11265-01-20G), AMD driver 17.7.1,
-xpool ssl://monerohash.com:9999 -xwal <address> -xpsw x -di 0123 -dmem 0 -tt 80 -tstop 95 -cclock 1225 -mclock 2250 -cvddc 950 -mvddc 950
with Claymore 9.7 avg. 740 KH/s with Claymore 10 beta 380 KH/s
any ideas? AMD Driver maybe?
|
|
|
Am I the only one around here just waiting for claymores new CryptoNote miner to see how good it is ? The are other free miners you can use, which get great speeds, sgminer, heck even w0lf's miner....
What is this crap about default address. You do realize if there isnt a default address, people wouldn't know what format the put the address in ? How the hell can you mine to a default address anyway ? you download the program, run it, and expect cryptocurrency to magically appear in your hands ? Scratching my head here.
Careful, fr4nk..., too much logic and you might actually make sense to some here.
|
|
|
|