Any change for stocksexchange to work again?

"Exchange" with manual withdrawal?     Can't stand from under the table laying laughing over there.     

Noone will answer. Asking devs answer here is like talking with the wall. Several people asked - and no answer.
Some other people will tell tales about your "small ammount". But it is ridiculous - EVERY other coin I have is staking - it doesn't matter how much coins I have. Sooner or later I receive reward, depending on the POS type it is frequent but small, or rare but big (when the reward is whole block). But it's not the case with ESP.
If there is a minimum limit to stake - then why not to write it in the ANN. There is no explanation of how POS work except some mythical 25%.
There is no chance to get the declared 25%POS. If you have 1ml+ coins - you should receive at least 250K a year. Its 23K a month - several blocks (if whole block is a reward). You have 3 months and nothing. Me too.

Is there any guide to move from old wallet to new one, to avoid possible problems?

Yes simple. Thank you. But I found better solution (I hope) https://github.com/masternodes/vps
Still waiting daemon to sync. Is there any way to speed it up?

425 nodes active and noone could help?

Can't find masternode setup guide. (maybe simple install.sh for ubuntu?)
The one I found don't work. https://masternodeguides.com/setup-bitsend-masternode-bsd-masternodes/
after "sudo ./configure" i get:
......
checking for QT... no
configure: WARNING: Qt dependencies not found; bitsend-qt frontend will not be built
checking whether to build bitsend Core GUI... no (Qt5)
checking for boostlib >= 1.47.0... yes
checking whether the Boost::System library is available... yes
checking for exit in -lboost_system... yes
checking whether the Boost::Filesystem library is available... yes
checking for exit in -lboost_filesystem... yes
checking whether the Boost::Program_Options library is available... yes
checking for exit in -lboost_program_options... yes
checking whether the Boost::Thread library is available... yes
checking for exit in -lboost_thread... yes
checking whether the Boost::Chrono library is available... yes
checking for exit in -lboost_chrono... yes
checking for mismatched boost c++11 scoped enums... ok
checking for SSL... yes
checking for CRYPTO... yes
checking for EVENT... no
configure: error: libevent not found.

And next command doesn't work.

I'm laughing under the table. Nice proof ... of what?
No no premine - dev is so "stupid" that he can't create 2, 3, 4 .... 1000 addresses.     

It's a matter of price only. But I agree that 65% MN reward is not good at all.

That's why I'm asking about how exactly staking work here. Some coins stake with small ammounts frequently. Some with rather big blocks but rarely. Anyway 25% POS should be visible if I stake for a month IMHO.

CryptoCoderz
I'd like to know how POS should work.
I have 363K coins in the wallet. Wallet is running, unlocked and seems to be synced and stacking showing estimated time of 1 day. Here it is:

21:25:37 getstakinginfo
21:25:37 {
"enabled" : true,
"staking" : true,
"errors" : "",
"currentblocksize" : 1000,
"currentblocktx" : 0,
"pooledtx" : 0,
"difficulty" : 3332078672.98852873,
"search-interval" : 16,
"weight" : 36379900391916,
"netstakeweight" : 601717962226076928,
"expectedtime" : 154535
}


But there were no staking at all, not even once.
Last mined coins arrived 23/02/2018. So it is 20 days but no staking for now, while 25% POS should be around 7.5K per month.
Why?

Now I get this:
2018-Mar-08 20:28:29.675508 INFO    Starting node_server
2018-Mar-08 20:28:40.095105 INFO    [51.15.194.166:18080 OUT] Sync data returned unknown top block: 100036 -> 100105 [69 blocks (0 days) behind]
2018-Mar-08 20:28:40.095105 INFO    SYNCHRONIZATION started
2018-Mar-08 20:28:51.458791 INFO    [176.9.59.221:18080 OUT] Sync data returned unknown top block: 100048 -> 100105 [57 blocks (0 days) behind]
2018-Mar-08 20:28:51.458791 INFO    SYNCHRONIZATION started
2018-Mar-08 20:29:03.048454 INFO    Block da44fba22279dd0924362731eb73a80965ea0da11cb39a66a3db8d52697977eb added to main chain. Index: 100100
2018-Mar-08 20:29:03.610486 INFO    [51.15.194.166:18080 OUT] SYNCHRONIZED OK
2018-Mar-08 20:29:03.612487 INFO
2018-Mar-08 20:29:03.612487 INFO    **********************************************************************
2018-Mar-08 20:29:03.612487 INFO    You are now synchronized with the network. You may now start wallet-cli.
2018-Mar-08 20:29:03.612487 INFO
2018-Mar-08 20:29:03.612487 INFO    Please note, that the blockchain will be saved only after you quit the daemon with "exit" command or if you use "save" command.
2018-Mar-08 20:29:03.612487 INFO    Otherwise, you will possibly need to synchronize the blockchain again.
2018-Mar-08 20:29:03.612487 INFO
2018-Mar-08 20:29:03.612487 INFO    Use "help" command to see the list of available commands.
2018-Mar-08 20:29:03.612487 INFO    **********************************************************************
2018-Mar-08 20:29:04.337529 INFO    [51.15.194.166:18080 OUT] Tx verification failed
2018-Mar-08 20:29:19.658405 INFO    [159.89.201.98:18080 OUT] Sync data returned unknown top block: 100105 -> 100765 [660 blocks (0 days) behind]
2018-Mar-08 20:29:19.658405 INFO    SYNCHRONIZATION started
2018-Mar-08 20:29:55.887480 INFO    [51.15.194.166:18080 OUT] Tx verification failed
2018-Mar-08 20:29:56.132494 INFO    [175.118.143.133:18080 OUT] Tx verification failed

It dosn't sync with wrong chain but always tries to sync:

2018-Mar-08 20:30:56.526954 INFO    [5.9.8.6:18080 OUT] Sync data returned unknown top block: 100105 -> 100765 [660 blocks (0 days) behind]
2018-Mar-08 20:30:56.526954 INFO    SYNCHRONIZATION started
2018-Mar-08 20:31:10.016727 INFO    [51.15.194.166:18080 OUT] Tx verification failed
2018-Mar-08 20:31:10.020728 INFO    [80.208.225.17:18080 OUT] Tx verification failed
2018-Mar-08 20:31:10.254740 INFO    [175.118.143.133:18080 OUT] Tx verification failed
2018-Mar-08 20:31:10.257739 INFO    [221.142.104.168:18080 OUT] Tx verification failed
2018-Mar-08 20:32:39.414844 INFO    [5.9.8.6:18080 OUT] Sync data returned unknown top block: 100106 -> 100765 [659 blocks (0 days) behind]
2018-Mar-08 20:32:39.414844 INFO    SYNCHRONIZATION started
2018-Mar-08 20:32:53.331644 INFO    [51.15.194.166:18080 OUT] Tx verification failed
2018-Mar-08 20:32:53.354643 INFO    [80.208.225.17:18080 OUT] Tx verification failed
2018-Mar-08 20:32:53.567658 INFO    [175.118.143.133:18080 OUT] Tx verification failed
2018-Mar-08 20:32:53.587658 INFO    [221.142.104.168:18080 OUT] Tx verification failed
2018-Mar-08 20:32:53.631659 INFO    [5.42.109.17:18080 OUT] Tx verification failed
2018-Mar-08 20:32:56.309817 INFO    [5.9.8.6:18080 OUT] Sync data returned unknown top block: 100107 -> 100765 [658 blocks (0 days) behind]
2018-Mar-08 20:32:56.309817 INFO    SYNCHRONIZATION started

Is it Ok? Or I will loose my coins if I send them now.

created bitsum.conf with those data.
Now when I start daemon I get:
"Failed to parse arguments: unrecognised option 'CRYPTONOTE_NAME'"

Update with what? Can't find any "addnodes" in thread.

Now wallet is stuck and cayn move further. I have that:
2018-Mar-06 21:13:58.444909 INFO    [80.208.225.17:18080 OUT] Sync data returned unknown top block: 100003 -> 100034 [31 blocks (0 days) behind]
2018-Mar-06 21:13:58.444909 INFO    SYNCHRONIZATION started
2018-Mar-06 21:14:02.380133 WARNING Proof of work too weak for block 9b53a3a6676f78ce013ee28fa00a92dc5c2b3ddc25c4a8f9fd1e27dc6808dd49
2018-Mar-06 21:14:13.459769 INFO    [198.27.64.94:18080 OUT] Sync data returned unknown top block: 100003 -> 100005 [2 blocks (0 days) behind]
2018-Mar-06 21:14:13.459769 INFO    SYNCHRONIZATION started
2018-Mar-06 21:14:18.092035 WARNING Proof of work too weak for block 9b53a3a6676f78ce013ee28fa00a92dc5c2b3ddc25c4a8f9fd1e27dc6808dd49
2018-Mar-06 21:14:35.637040 INFO    [198.27.64.94:18080 OUT] Sync data returned unknown top block: 100003 -> 100005 [2 blocks (0 days) behind]
2018-Mar-06 21:14:35.637040 INFO    SYNCHRONIZATION started
2018-Mar-06 21:14:39.942285 WARNING Proof of work too weak for block 9b53a3a6676f78ce013ee28fa00a92dc5c2b3ddc25c4a8f9fd1e27dc6808dd49
2018-Mar-06 21:14:48.148756 INFO    [80.208.225.17:18080 OUT] Sync data returned unknown top block: 100003 -> 100034 [31 blocks (0 days) behind]
2018-Mar-06 21:14:48.148756 INFO    SYNCHRONIZATION started
2018-Mar-06 21:14:54.912142 WARNING Proof of work too weak for block 9b53a3a6676f78ce013ee28fa00a92dc5c2b3ddc25c4a8f9fd1e27dc6808dd49
2018-Mar-06 21:16:04.876159 INFO    [80.208.225.17:18080 OUT] Sync data returned unknown top block: 100003 -> 100035 [32 blocks (0 days) behind]
2018-Mar-06 21:16:04.876159 INFO    SYNCHRONIZATION started
2018-Mar-06 21:16:11.312519 WARNING Proof of work too weak for block 9b53a3a6676f78ce013ee28fa00a92dc5c2b3ddc25c4a8f9fd1e27dc6808dd49

I and can't send coins to local wallet because have this in web wallet:
BLOCKCHAIN STATUS
Synchronizing with blockchaing
0 of -1 blocks synchronized

What to do?

Is it possible to use normal wallet? I have a lot of "tx verification" errors in it and not sure that everything is OK.
The link to it disappeared from ANN, but I don't want to use telegram with unknown security and recovery possibilities.

How can I move coins from old wallet (denominated one) to telegram wallet?

Actually it means that for only ~200-250$ any coin can get to CMC.

I'm glad that helped you, but where did you download blockchain from?
I've downlodad blockchain from the article mentioned couple of pages above. But the only difference is that now it is stuck on block 211878 14weeks ago.

Dev just say - coin is dead or is it too hard to change ann and post latest wallet (I see 2.1.2 peers, while I see only 2.0.1.1 version in ann) and latest blockchain that WORK 100%?