are we a loud to use the stl files on public pay services to have them made if we don't try to sell it as ours which i won't do . stealing is bad and in the end no one gets any were .

 I was wondering to so i looked it up . .
Max. Air Pressure:    

1.412 IN H2O
35.877 mmH2O


mmH2O   Millimeters of Water (unit of pressure)



mmH2O

Also found in: Encyclopedia.
Acronym   Definition
mmH2O   Millimeters of Water (unit of pressure)
Copyright 1988-2014 AcronymFinder.com, All rights reserved.



Various versions feature a combination of unique properties such as ultra-low weight and stretchiness, or enhanced moisture permeability and water repellency up to pressures of 10,000 mmH2O or greater achieved through special lamination.
China,Japan : Nantong Teijin to Present High-performance, ... by Mena Report
5mm, the height is 11mm, and the value of the air pressure drop is 16 mmH2O, Fig.
Determination of the optimal design parameters for the wavy air fins ... by Ilies, Paul; Naghi, Mihai; Mare, Ciprian; Sucila, Marius / Annals of DAAAM & Proceedings
This fine denier spunbond fabric of 17 gsm reaches 100-140 mmH2O hydrostatic head, which complies with most of the market requirements for barrier leg cuffs with no melt blown layer between two spunbond layers.

S5 Soon nice waiting . !!! no Rush .

wow, nice Ive been hoping for some one to come out with some thing like this .. Sense Windows 10 hits on July 29 th   and it now works on the Rasp PI b2 this might be just the thing once 10 does come out.

Soon we will have both BFG and CFMINer to play with in our S5, so this should work nice by then .


There might be one like this for Script ALT-coins but that Script coins and  who really does SHa256 alt coins and makes much, so this might just be it for bit coins and  some of us who need to set timers on pools  to move during slow times like westhash nicehash lets us do but with any pool. some others have been asking for some thing like this if works out, i will be donating .



The S5 can balance mine ETC you have edit a file in the soft ware  i had mine doing it once but the problem is on reboot it resets back to defaults for that setting.

I think its meant to because of how it works now .

It's best to start here


https://bitcointalk.org/index.php?board=39.0


Most of your question depend on your speeds what way you plan to mine with hardware in your home or cloud mine etc . why i say in your home some will flat tell you home mining is dead but i know a few who make a lot mining out of there homes . so to me as for home mining that's a point of View  or what you call making a lot in your home etc.

if you look at what i posted i also use a delta fan with 151  CFM as push i wouldn't use the Silverstone alone or it will get hot fast and I use the Silverstone on the P setting not Q .

I used a steak knife on my delta fans i use or any of the PWM fans I use that don't fit the plug .

The 3 Amps might be a problem the controller on the S5 cant turn it the rest will be fine if the controller turns it , i know with one of the delta fans you need external power to power it. if you want to use it with the  S5 I think  it's at 3 amps id have to go look at that fan. just looked at the fan  its at 3.9 amps so I'm not sure with your fan if it will or won't . IF you just want to add a second fan to the stock fan that's even more noise + you won't need but one fan if you stick with the stock fan .

SO it is suppose to after each block Ive been seeing nothing, in fact i think it said once for me i was at  0.2 or around there then the block finished nothing went in to the as of last block . as i said i have no idea how to pin it or prove  it but wait for others to complain then that gives me idea on how to explain it.



This is my last try with them I'm watching my number when these two blocks finish and nothing moves time for me to call it. and only have one S5 here .

 mine says that Approximately 0.11827577 BTC remaining to enter payout queue. but and i hope it is because Eligius  routine maintenance.


my payout should be  0.16827577 BTC or around there and again i hope it is because of the maintenance, if not its time to move on and form a new strat for me any way .

you can try these fans for me it works well


http://www.amazon.com/gp/product/B00A460TK6?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00  as pull this one as push http://www.amazon.com/gp/product/B004Y1HLA8?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00



so far on hot day here i don't go over 59 C per blade at defaults i really don't OC so don't know how it would handle it. and the sound is not to bad you can actually sleep in the same room with those fans on one S 5.



THere right i have one of the  TFC1212DE the S5 can't power it up but the one i linked they do Np and usually run at 2700 RPMS or lower depending you surrounding hottest Ive seen  one blade get was 60 C but I fixed that i blow out the fins with a wet.dry vac and re pasted all the broads which dropped all my S 5 at least 2 to 3 degrees each . but not every one get the same results.

SO it's not just me, i just don't know how to pin it down and thought I understand how the pay system worked with this pool and my pay stats haven't seemed to change for all most a week.

I agree in his case If because of noise there is a lot cheaper ways some fans he can buy for it can actually  cut the level down to 40 to 45 DB.  these thing are power hugs i don't even have my X3 any more i went to a X6 and it's still bad .

there is no custom cooling kits any place to buy  have to make your own as he said above if you find one let me know PLz  I would love to WC my Zeus's for the hell of it . i know it's a waste but a lot of fun .

 honestly I think the whole part of the kit if you find one would be the water blocks . or even make one getting the right blocks made cheap .


The only reason there is not any to be had is because ZEUS screwed over a lot of people when they pulled out of  making Script miner . They had a very good thing going . and now they are even worse on Zoomhash

and expect this post to be moved to a alt coin forum soon   .

My question


Why does the nice hash bot just stop and say in yellow letters there is not enough founds  to use it but when i go to the site there it is still running i usually have more then enough to keep using the BOT. and CS here suX, so I'm  asking if others might no, not CS .

nice shirt and before anyone goes donate i did i may even buy a shirt for the hell of it . will donate to the burger found next month i can again then. I want nothing in return and wont ask for anything  you don't even know its me donating i want it that way .

  --scrypt  -S all -o stratum+tcp://scrypt.usa.nicehash.com:3333 -u your btc adresss -p x --set-device zeus:clock=328 --set-device zeus:chips=64 --set zus:ignore_golden_nonce=1



that's work with  any version of BFG that supports ZeusMiner, the version i would use for ZeusMiner is http://blog.rastating.com/mining-dogecoin-with-a-zeusminer-blizzard-and-a-raspberry-pi/ ...... or get it here https://litecointalk.org/index.php?topic=20477.0

or use ZoomHASH http://zoomhash.com/pages/raspberry-pi-software-update this one has 4.30 BFG . OR use MINERA later this week once the new version is released he fixed the Calculation bug  in MINERA with any version over 4.3.1  i was told .



you just won't have  extranonoce.subscribe subscription Support with BFG 4.3.1. I have run my hurricane for hours on westhash without using extranonoce.subscribe subscription with out one issue ever .

The S5 stock is  120 x 120 x 38 mm  if that's what your asking ?

http://www.amazon.com/gp/product/B00A460TK6?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00     CFM is 190 and very quite i use a delta http://www.amazon.com/gp/product/B004Y1HLA8?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00 as push one of these as pull .

if this is your first one you may want a full kit like this




 http://www.amazon.com/CanaKit-Raspberry-Complete-Original-Preloaded/dp/B008XVAVAW/ref=sr_1_4?s=electronics&ie=UTF8&qid=1432870486&sr=1-4&keywords=Raspberry+Pi+2+Model+B+Project+Board