Yes, I am do not get any connections and the wallet doesn't sync I’ve tested the latest mac wallet version 2.1.0.4 and I didn’t have any issues with connections. I use the suggested diamond.conf setup from the OP of this thread and have synced successfully both using my own backup blockchain and the special MAC blockchain on the OP. So if you already tried to delete the file peers.dat in the Diamond folder (and restarted your wallet afterwards) and used the suggested diamond.conf setup and blockchain from the OP, then my next guess is that it could be a firewall blocking the connections. You can also look in the DMD FAQ for more info: https://bitcointalk.org/index.php?topic=1478653.0I've done everything I can and I am running 2.0.5.5 and maybe thats the reason, so I'll download again |
|
|
|
I have said quite clearly NOT TO USE YoBit as an exchange as they are unable / unwilling to communicate. They have been contacted but they do not respond to anything. I do not know if they run V1 or V2. |
|
|
|
|
Manual swap from MOJO V1 to V2 is now open, sorry about the delay.
If you have old MOJO V1 coins that you did not manage to swap for V2 coins, then PM me with the amount. I know you may have sent a PM before but I get so many so that they may be lost sometimes. If you PM me with the amount you wanna swap and I'll give you a V1 address to send to.
I guess that if you haven't swapped you're still running the V1 client (unless you are running both). So keep running the V1 client until you have sent me your V1 coins. Then download the V2 and PM me your V2 address and I'll get you your coins ASAP back to you.
Any questions about this?
The Presstab block explorer is still on the V1 chain so you can see your transactions there. It suggests that the total supply of V1 is 100,134,831 MOJO and we have exchanged 93,348,328 MOJO so there may still be around 6,786,503 MOJOV1 floating around somewhere.
I will keep this open for 2-3 weeks and I know there are still V1 nodes running. so PM me and I'll deal as soon as I can.
|
|
|
|
Yes, I am do not get any connections and the wallet doesn't sync |
|
|
|
I have installed the latest wallet and added all the nodes in the block explorer in the diamond.conf file and still get no connections. Help please?
Are you using a Mac wallet? Yes, the latest Mac wallet |
|
|
|
It would be good to have Mojo on trex or polo, hope dev could make it happen with the help of the community.
This will happen as soon as we have the masternodes and staking up. |
|
|
|
|
I have installed the latest wallet and added all the nodes in the block explorer in the diamond.conf file and still get no connections. Help please?
|
|
|
|
|
Can someone try to build a daemon from the above, I am getting some errors and are looking into it
|
|
|
|
Sorry there appears to have been a silly  oversight, the Linux build instructions for the masternode daemon points to the V1 repo and should be: BUILD LINUX 1) git clone https://github.com/bryceweiner/mojocoin.git mojocoin 2) cd mojocoin/src 3) sudo make -f makefile.unix # Headless mojocoin (optional) 4) strip mojocoind 5) sudo cp mojocoind /usr/local/bin so try this to build the daemon for the MN |
|
|
|
GOOD NEWSLivecoin is now open for withdrawals / deposits Lets run it for a while and we'll keep and eye for any issues. Please get back to me with staking details. I will buyback at ICO price, now V2 is running. Just give me a day. Two days ago from this POST - NO OFFER TO BUYBACK all together 6 days since I sent you a PM - NO BUYBACK OFFER How about send me an offer to buyback the coins? Masternode still not working, PoS still not working ... Price currently 50% under ICO ... I know anyone have to stay calm ... How many coins do you wanna sell back? |
|
|
|
|
Actually, given then rise in Bitcoin price the value of MOJO now is about the same as at the end of the ICO.
We are now working hard to get the masternode system going.
|
|
|
|
A masternode can be set set up like a DASH masternode so I am trying that in the next few hours and will report back. |
|
|
|
Yes I have blocks ready to stake. Message is as below:
Staking.
Your weight is 315000
Network weight is 0
Expected time to earn reward is 0
seconds
Been this way for hours now. I guess it won't work until Masternode is setup. Hope you are out now dev and ready to get things a rolling.
I'm back home and we are both looking into the masternode aspect and the staking |
|
|
|
And the truth is good news today)
I can easily bring coins to exchange, without fear that they will get stuck in the network?
Yes as long as you have V2 wallet. I have made a few transactions and all were flawless. Things good now. Fine, then I deduce from the Exchange and let Pos works) Let's see if PoS works - the last days id didn't - from the log output it seems like a masternode must be present to control the PoS payout : 2016-07-12 18:55:37 CActiveMasternode::ManageStatus() - Begin
2016-07-12 18:55:44 CheckStakeKernelHash() : using modifier 0xa28905b913dd8417 at height=17130 timestamp=2016-07-12 18:54:48 UTC for block from timestamp=2016-07-01 07:48:50 UTC
2016-07-12 18:55:44 CheckStakeKernelHash() : check modifier=0xa28905b913dd8417 nTimeBlockFrom=1467359330 nTimeTxPrev=1467359072 nPrevout=0 nTimeTx=1468349744 hashProof=c306603e9dee82373a4b3301cf1e8133a41f095ac8d4dbcf97c5ac7504308e8d
2016-07-12 18:55:44 ERROR: CreateCoinStake: Failed to detect masternode to pay regards We are working to set up a couple of masternodes, give it 24 hours and let's see |
|
|
|
|
We are working to get Tor/Clearnet bridging nodes up next and then we'll see how the staking works and then we will address the masternodes. At the moment the chain appears healthy and transactions are working. I expect to see staking blocks tomorrow at some point.
|
|
|
|
GOOD NEWSLivecoin is now open for withdrawals / deposits Lets run it for a while and we'll keep and eye for any issues. Please get back to me with staking details. I will buyback at ICO price, now V2 is running. Just give me a day.
|
|
|
|
GOOD NEWSLivecoin is now open for withdrawals / deposits Lets run it for a while and we'll keep and eye for any issues. Please get back to me with staking details.
|
|
|
|
|
I was clear about the buyback offer
1. First V2 and Livecoin is up and the buy back is obviously for MOJOV2 right.
2. My understanding is that nobody has MOJOV2 yet as withdrawals haven't been activated yet.
??
Does anyone have MOJOV2 to sell back to me. I am NOT home until tomorow.
So, does anyone have MOJOV2 to sell back to me? PM with the amount and it will HAVE to wait until Livecoin has opened for withdrawals.
MOJOV1 is no longer technically active, only for swaps for people who missed the Livecoin swap.
Hopefully Livecoin should be open for withdrawal sometime today.
|
|
|
|
My findings ... maybe EBK1000 could finaly comment on this - I tried to run Masternodes , fullnodes since weeks to keep the chain running. root@vmd12461:~/mojocoin/src# grep -n masternode activemasternode.cpp
12:// Bootup the masternode, look for a 500 MOJO input and register on the network
root@vmd12461:~/mojocoin/src# grep -n exactly *
activemasternode.cpp:437: if(out.tx->vout[out.i].nValue == GetMNCollateral(pindexBest->nHeight)*COIN) { //exactly
root@vmd12461:~/mojocoin/src# grep -n GetMNCollateral main.h
78:inline int64_t GetMNCollateral(int nHeight) { return 100000; }
If you check my posts you see that the daemon accepts the 100000 transaction (masternode outputs) but can't start it for an unknown reason (at least for me) regards Please keep the scam accusations / moaning to the other thread. I will deal with masternode issues when withdrawals are working from Livecoin (hopefully) by tomorrow. All the crap will just cause me to lock the thread again. 1. We have working Win and Mac wallets out 2. We will fix the chain and open withdrawals (hopefully tomorrow, Livecoin stated they anticipated withdrawals will be open tomorrow) 3. We will then look at other issues as they arise and look at the staking 4. Do you have an issue, PM the details and IT WILL BE DEALT WITH in order That is all for now. Moan and make accusation in the other thread started by Hagie. |
|
|
|
ABOUT COMPLAINTS
If you have any complaints then PM me with the details and I will deal with it in due time after we have V2 up and you have all been able to withdraw coins. There is no point in making complainst in the thread as it may get missed. It's easy to miss a post if there are numerous new posts. PM is better.
i sent you a PM WITH NO REPLY Be reasonable, right. I am not on 24/7 and there is a long list of things to be dealt with. It doesn't help to fill this thread with complaints, it takes time away from dealing with issues. |
|
|
|
|
Show Posts
