I believe I may have a few intel PSU in a box some where, if you need them for sizing etc. I will donate them to the cause. I would love to see the PSU's modular as well with only having to change maybe the PSU interface board and of course the PSU. Good to see a decent sized miner made for the masses.
|
|
|
For BTC I have S2, S3, S3+, S4, S5, C1, SP20E, BTC Garden AM V2, Bitmine Desk V2, and some S1's on for memories since they were my first miners I purchased off ebay when I first started.
|
|
|
Some models can handle 100F ambient, some can not, some hash less, some have hardware errors.
What miner are you buying?
|
|
|
I just took these out of my mine and looking to sell them. I have 18 units total, two units can be piggy backed to create a 1.2Th+ miner. I usually see 1210Gh-1245Gh. I believe with a high efficiency PSU you can get 610-620Gh out of these at 600W (I believe this is at the wall). These units are quite and have a heat output that is not like a hair dryer. I would consider this a good home miner if you have low cost electricity. If you buy two units to create the complete 1.2Th miner I will include the Raspberry Pi B Controller with software for free. I have the original packaging to ship them in as well. Buyer pays shipping or provides shipping labels Buyer will send first or pay for escrow through TomatoCage or OgNasty I will test fans and unit for full hashing power before shipping I am open to offers at this point, I will post my preferred price tomorrow after I have had some time to think about it. NOTE: The stacks below are 2 units creating a 1.2Th miner.
|
|
|
I'm trying to buy the breakout board, but I don't know where. Please help Contact Finksy or J4bberwock.
|
|
|
I am confused, it says your renting out S1's but your picture is of an S5??
|
|
|
I use a combination of custom sized screens and synthetic hog hair air filters.
|
|
|
Very nice looking forward to some new miners.
|
|
|
We did not find the breakout boards for 2880 PSU on your store, does this board also transfer the AC socket onto the board or not ? Could you show me please , we may purchase some for our customers in future .
Below are pics of his board. Yes it transfers AC through the board as well. Yes , this really helps , if I use it for S5+ and connect 14PCIE 6pins of them, which ones I should connect , or just choose any 14 of them . thanks Does not mater on this board they are all the same.
|
|
|
antpool was one the other was an ip address.
Yup looking for the exact ones, so I can play tricks with DNS and Proxies so I do not need to touch some S5's when I set them up. Thanks.
|
|
|
We did not find the breakout boards for 2880 PSU on your store, does this board also transfer the AC socket onto the board or not ? Could you show me please , we may purchase some for our customers in future .
Below are pics of his board. Yes it transfers AC through the board as well.
|
|
|
No one is unpacking an S5 that can provide the default pools?
|
|
|
Care to share clock speed and voltages ?
432 chips = 7.2 times of antminer s5. With only 7.7THS that means it is underclock right ? I think there s many overclock rooms, maybe for 9THS with 4500W
Thanks..
The amount of heat would be crazy, that would be 3 * 24/7 Oven of heat crammed in a tiny bundle :S. I look forward to specs but laws of physics apply to mining gear too. Its not that bad, a little over 15,000 BTU/hr. If you wanted to air condition it a small 1.5 Ton window unit could handle it. Otherwise just dump the heat to outside.
|
|
|
There are pros and cons to use server PSU , like 2800W , you buy from china , it is 6KG each, it will be expensive shipping cost . I think the IBM 2880W is a good option since 3 of these PSU's can run 2 of these miners. 3 PSU for every 2 miners is not bad.
|
|
|
As the subject says can anyone that has a screenshot post it?
I would like to know what the default factory pools on the S5 are set to.
Thanks, MC
|
|
|
They have told me, that i would be sent the tracking info when it ships next week. I will update, when i have a package tracking, whem it arrives and also the results of testing and review.
I guess i will see what happens. So far nothing but words has been sent my way.
|
|
|
This is pretty standard by any manufacturer, when I used to repair electronics. Sony, Panasonic and many others required us to void warranties if the water sensor was ever tripped, keep in mind that if the camera or electronics is in cold A/C and you take it out on a hot humid day it may trip the sensor. Other then that most got repaired under warranty.
Is it moral since its their money and their deciding? Probably not, but they will not go out of their way not to honor their warranty cause if people complain in mass its ruins their reputation. So in the case of 5 miners, I would expect them to be honest.
|
|
|
|