Latest posts of: MyRig

Show Posts
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [36] 37 38 39 40 »

701

Bitcoin / Hardware / Re: ANTMINER S5: The New Standard, 0.51J/G, Shipping on December 27th

on: December 22, 2014, 09:46:50 PM

@Pekatete, Thanks for the idea! Cons to EMS is package gets damaged or get lost too often than UPS Express Air Shipping. Quote from: pekatete on December 22, 2014, 08:01:10 PM Would be nice if Bitmain re-introduced the option to ship via / with EMS - I am sure it will be a lot cheaper than UPS (and obviously DHL). I know they are not as fast as the other behemoths, but we'd be selecting them in that knowledge.

702

Bitcoin / Hardware / Re: ANTMINER S5: The New Standard, 0.51J/G, Shipping on December 27th

on: December 22, 2014, 09:45:01 PM

Bottom = YES Top = NO (Open Top Design) Quote from: bgibso01 on December 22, 2014, 07:44:09 PM So have we heard definitively whether or not there is a top and bottom to this unit?

703

Bitcoin / Hardware / Re: ANTMINER S5: The New Standard, 0.51J/G, Shipping on December 27th

on: December 22, 2014, 09:43:58 PM

There is always a chance or possibilities, but we DO NOT recommend any over clocking. S5 specific, may be but count it as not much... Please don't count on OC potential when you calculate mining gain as power consumption usually goes up and the hard ware failure may happens. Quote from: Subw on December 22, 2014, 07:38:07 PM BitmainWarranty, what is the overclocking potential of S5??

704

Bitcoin / Hardware / Re: ANTMINER S5: The New Standard, 0.51J/G, Shipping on December 27th

on: December 22, 2014, 06:52:50 PM

Hey guys!!! We have crunched numbers now and still crunching. Stay tuned for http://www.bitmaintech.com Keep sending us the advice and numbers to make our sales team THINK Bitmain is very responsive to the community's voice and pricing may change at any time up until the sales open time

705

Bitcoin / Hardware / Re: ANTMINER S5: The New Standard, 0.51J/G, Shipping on December 27th

on: December 22, 2014, 06:04:17 PM

Hi Guys, S5 is same size as S3. Any suggestions, PM us!!! English Support is getting better and will be... (I hope, if not let us know ) +1-844-248-6246 Option 2 for the techs. Native Speakers are limited so if the line was not answered in 3 minutes, please leave a message, someone will get back to you as soon as possible. If a 10' pole is not long enough, we may have a 20' pole to share (Sorry not being politically correct, but should be no pole needed for the S5 ) New firmware Revisions to the S3 & S3+ are almost complete. This time, we are currently testing with over 2,500 S3 and S3+ with different batches to make sure it runs smoother. *CPU performance seems to be getting better. Hopefully the revision be uploaded once we confirm the firmware works better on these mass testing. S5, you don't have to "hack" to achieve 0.51W/GH at higher $/GH, or better noise level We are the support group but if you think the S5 price is not advantageous to customers, would you kindly PM us so we can forward the info to the internal sales team!!! Happy Holiday!!!!

706

Bitcoin / Hardware / Re: ANTMINER S4 Black Friday Deals 0.409USD/GH/s, FREE International Shipping

on: December 22, 2014, 06:03:44 AM

May be something got lost in the translation... All Antminer Product comes with 90-day parts replacement warranty. Sent you PM. Please check! Quote from: Rabinovitch on December 22, 2014, 05:49:12 AM Quote from: dogie on December 02, 2014, 11:28:07 PM Quote from: Tupsu on December 02, 2014, 11:21:51 PM Does the S2 lifetime warranty? Could you confirm this? ...We have already contacted Bitmain and they state that item is under lifetime warranty and boards may be returned for repair or replacement for free. We would like to sell item instead of going to taking the time to return. ... https://bitcointalk.org/index.php?topic=870784.0 Checking, might be a while as quite a few staff heading to the St Peters' conference. Hi dogie, are there any news?..

707

Bitcoin / Hardware / Re: ANTMINER S3 Discussion and Support Thread.

on: December 21, 2014, 08:12:26 PM

Usually Batch 1 has the best value... Sticker Price may be ouch at initial look, but the long term view should be good. (No promisse but I could not resist...) Happy Holiday! Quote from: Biodom on December 21, 2014, 04:52:56 PM Quote from: yslyung on December 21, 2014, 04:19:49 PM is the price gonna drop ? i think i better wait for S5 but NOT batch 1 .... batch 1-2 is ALWAYS the most profitable (if they work). My underperforming batch 1 machine made way more BTC than outperforming batch 7.

708

Bitcoin / Hardware / Re: Antminer S4,3 Noise levels and the true realities of Bitcoin mining in the house

on: December 21, 2014, 08:10:18 PM

Please wait for the official announcement from the sales group and then if we could, we will post the noise level comparisons for everyone to see!! Happy Holiday! Quote from: aclass on December 21, 2014, 06:39:51 PM so how will S5 be compared to S3?

709

Bitcoin / Hardware / Re: ANTMINER C1 Discussion and Support Thread

on: December 21, 2014, 06:17:36 AM

THANK YOU, SIR!!! Quote from: notlist3d on December 21, 2014, 05:50:37 AM Quote from: BitmainWarranty on December 21, 2014, 04:19:35 AM @notlist3d Hey, could you share the link to the pump you use? Please!!!!! Sure! I am using http://www.ebay.com/itm/380693788606 powered by www.amazon.com/Phobya-4-Pin-3-Pin-Splitter-Connection/dp/B007S3T4O0 . There could be better ones out there. I just had to get one in a hurry to get my miners back up. Those did the trick.

710

Bitcoin / Hardware / Re: ANTMINER C1 Discussion and Support Thread

on: December 21, 2014, 04:19:35 AM

@notlist3d Hey, could you share the link to the pump you use? Please!!!!!

711

Bitcoin / Hardware / Re: ANTMINER S3 Discussion and Support Thread.

on: December 21, 2014, 04:17:43 AM

hummmmmm S3 and S4 uses BM1382 chips. S5... I think you already caught it BM1384 chips. : Some works could be copy and paste, but we will be paying more attention to details. Each time you catch something, please let us know!

712

Bitcoin / Hardware / Re: Antminer S4,3 Noise levels and the true realities of Bitcoin mining in the house

on: December 21, 2014, 04:02:06 AM

Thank you for the video! Yes, S4 is louder than S3 or S2. S5 will be quieter than S4 But Please pick your Wife over Bitcoin Miner!!! Quote from: cryptopick on December 21, 2014, 03:59:34 AM http://youtu.be/KADr0V4ZkKA

713

Bitcoin / Hardware / Re: ANTMINER S4 Black Friday Deals 0.409USD/GH/s, FREE International Shipping

on: December 21, 2014, 03:56:45 AM

@mdude77 Antminer S4 now ships with DHCP Activated as the default network setting. First, please access to your Router's Control Panel and go to the DHCP Table (IP Assignment) page. Connect your S4 into your Router, then power it on. In 2-4 minutes, please take a look at the LCD panel and use the IP address displayed on the screen on your web browser to access the web interface of the Antminer. If your router is not activated to handle DHCP, the screen will show the IP address of 127.0.0.1 Please find a router that has DHCP enabled, or please activate the DHCP on the router and connect.

714

Bitcoin / Hardware / Re: ANTMINER S4 Black Friday Deals 0.409USD/GH/s, FREE International Shipping

on: December 21, 2014, 03:49:31 AM

Bank Wire Transaction Time.... Some bank you send the payment from may clear and shows up in Bitmain's Account the same day, some the following day, or the next business day or 2-4 business days. It is all depends on if the wire was sent on the same business day cut off time, if the bank you sent the payment from has any intermediary bank before reaching to Bitmain's Bank Account, mis-spelled "Bitmain Technologies Limited" in the wire instruction. If you can, please add what you are paying for in the note and OrderID or your e-mail address associated with Bitmaintech.com account or Bitmaintech.com website username. If you din't put anything in the note, please don't worry, please take a few pictures of the wire receipt and e-mail it to info@bitmaintech.com and someone will be in contact with you.

715

Bitcoin / Hardware / Re: anyone got a spare 1352.254 BTC

on: December 21, 2014, 03:35:58 AM

Hardware failure rate is average less than 0.5% Current S4 has different PSU than batch 1 and partial Batch 2. Hashing PCB is newer design and the control PCB has newer design and internal cables are different. Quote from: pak13 on December 20, 2014, 04:50:37 AM I'd be interested in how often they are replacing burnt out power supplies and costs associated.

716

Bitcoin / Hardware / Re: ANTMINER S3 Discussion and Support Thread.

on: December 19, 2014, 04:58:37 AM

What PSU do you use? Quote from: BTC-TMXSTAR on December 19, 2014, 02:55:26 AM HELP! My antminer S3+ will shutdown itself after 2minutes. any ideas? please help me Thanks advance and God Bless!!!!!

717

Bitcoin / Hardware / Re: ANTMINER S4 Black Friday Deals 0.409USD/GH/s, FREE International Shipping

on: December 19, 2014, 02:35:21 AM

Each miner goes though rigorous quality control by QA staffs multiple times. Sometimes the air turbulence during the air freight may cause damages to the miner as we use International Express via Air to deliver miners to the end customers. Please PM here or contact +1-844-248-6246 Option 2 to request the replacement parts sent to you. Please prepare the original order confirmation page to submit to the techs on the phone or in PM. PS: some are beyond our control, however, we do not point finger at UPS and say, UPS's problem deal with them, but, rather, when we are notified, we will handle the DOA RMA process as fast as we can. @techgeeks If you have a blank LCD screen during the bootup, then more than likely the loose contact MicroSD card, or currupted MicroSD card or damaged MicroSD card. Please try to reseat the microSD card, if that doesn't work, please try to reimage the MicroSD card from the image available at http://www.bitmaintech.com Thank you Quote from: techgeeks on December 18, 2014, 10:30:14 PM Bitmain Warranty - Are there issues with the power supply - I just received my 16 S4's and 2 had bad power supplies out of the box - yellow/red flashing lights. Now 3 others have died doing the same. Running at 240v in a NOC at 65 degrees F. Help... Also 2 have 1 board show x's I am about to order another 16 pack, but concerned about the reliability. tia

718

Bitcoin / Hardware / Re: ANTMINER S4 Black Friday Deals 0.409USD/GH/s, FREE International Shipping

on: December 18, 2014, 01:39:05 AM

Yes, 110-240v Quote from: taweesak on December 17, 2014, 01:50:20 PM can antminer s4 use 220v. electricity?

719

Bitcoin / Hardware / Re: ANTMINER S4 Discussion and Support Thread

on: December 09, 2014, 09:26:56 PM

PM sent, if you are still having problems, please give us a call at +1-844-248-6246 Option 2 Or you can leave a message if the techs are busy. Tech Support Team Quote from: WayKewl on December 09, 2014, 05:01:53 PM Dang, I had it up and running and then had to go change something. First start had no display and forum help said to pop out card, back in, reboot. This worked… DHCP assigned an IP and it was displayed in the LED. So far so good. I logged in, changed the password, and Hostname to AntMinerS4 (I also have an S3 so I added S4 as not to conflict with DNS name). Changed Pools and all worked great all night. So here’s where it goes wrong. I went to the NETWORK tab and changed the Subnet to 255.255.255.0 and the Gateway and DNS to my Router, 192.168.1.1. I had NOT yet changed the setting from DHCP to STATIC before hitting SAVE and APPLY. Once the S4 rebooted the LED displayed the local loopback 127.0.0.1 instead of an allocated IP. So, I rebooted again and this time I have no display again. I’m trying to do a factory reset on it and just leave the NETWORK setting alone but can’t seem to get the unit to reset. Not 100% sure how to do this. From what I’ve read, you press a paper clip into the small hole at the bottom left of the LED panel for 3+ seconds to reset. I’ve also read the red light will blink and then it should restart. With the unit on, when I press the paper clip in and hold for 10 seconds and remove, nothing happens… Am I doing something wrong in order to get the unit to factory reset all settings?

720

Bitcoin / Hardware / Re: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner

on: December 04, 2014, 10:01:42 AM

SSH into the S1, then please edit /etc/init.d/cgminer file comment out the whole IF statement near the end of the file with the last line "fi" vi cgminer then press "i" to enter the edit mode Place "#" in front of each line. then press "Escape", ":" "wq" then "Enter" Please login to the control panel, then go to the "System" tab, and uncheck Time Sync then hit "Save & Apply" will fix this issue Quote from: SammyD1st on October 31, 2014, 03:50:58 PM Quote from: sushi on October 31, 2014, 04:55:29 AM Hi Sam, If you could, pleaes power off the S1, then turn it back on. Wait for about 4 minutes, then could you please copy and paste the entire SYSTEM LOG for S1? if you could, lets test the S1 control PCB first. Remove the S1 control PCB and place it on the working S1 and see if it hashes. If the control PCB is good, then remove one of the questionable hashing PCB and connect it to the known working S1, and see if it hashes. Repeat 1 more time with the other PCB. If any of them shows problem, then you 'll know it is the damaged item. Contact the seller and ask for exchange or refund. Thank you for your help! Here is the log, forgive me if my formatting gets messed up: Fri Oct 31 23:42:43 2014 daemon.info sysinit: ntpd: reply from 66.96.110.10: reach 0x03 offset 14407633.443324 delay 28815266.977488 status 0x24 strat 2 refid 0x84a30466 rootdelay 0.051240 Fri Oct 31 23:42:43 2014 daemon.info sysinit: ntpd: sent query to 167.88.119.29 Fri Oct 31 23:42:43 2014 daemon.info sysinit: ntpd: sent query to 50.7.96.4 Fri Oct 31 23:42:43 2014 daemon.info sysinit: ntpd: sent query to 69.129.251.133 Fri Oct 31 23:42:43 2014 daemon.info sysinit: ntpd: reply from 167.88.119.29: reach 0x07 offset 0.037790 delay 0.143149 status 0x24 strat 2 refid 0xd133a1ee rootdelay 0.033433 Fri Oct 31 23:42:43 2014 daemon.info sysinit: ntpd: reply from 69.129.251.133: reach 0x07 offset 0.038443 delay 0.145786 status 0x1c strat 2 refid 0xd8a581f4 rootdelay 0.020783 Fri Oct 31 23:42:43 2014 daemon.info sysinit: ntpd: reply from 50.7.96.4: reach 0x07 offset 0.050167 delay 0.147852 status 0x24 strat 2 refid 0x808a8dac rootdelay 0.033005 Fri Oct 31 23:42:44 2014 daemon.info sysinit: ntpd: sent query to 66.96.110.10 Fri Oct 31 23:42:44 2014 daemon.info sysinit: ntpd: sent query to 167.88.119.29 Fri Oct 31 23:42:44 2014 daemon.info sysinit: ntpd: sent query to 50.7.96.4 Fri Oct 31 23:42:44 2014 daemon.info sysinit: ntpd: reply from 50.7.96.4: reach 0x0f offset 0.011424 delay 0.070260 status 0x24 strat 2 refid 0x808a8dac rootdelay 0.033005 Fri Oct 31 23:42:44 2014 daemon.info sysinit: ntpd: reply from 167.88.119.29: reach 0x0f offset 0.002501 delay 0.073467 status 0x24 strat 2 refid 0xd133a1ee rootdelay 0.033433 Fri Oct 31 23:42:44 2014 daemon.info sysinit: ntpd: reply from 66.96.110.10: reach 0x07 offset 0.020424 delay 0.131780 status 0x24 strat 2 refid 0x84a30466 rootdelay 0.051240 Fri Oct 31 23:42:45 2014 daemon.info sysinit: ntpd: sent query to 66.96.110.10 Fri Oct 31 23:42:45 2014 daemon.info sysinit: ntpd: sent query to 167.88.119.29 Fri Oct 31 23:42:45 2014 daemon.info sysinit: ntpd: sent query to 69.129.251.133 Fri Oct 31 23:42:45 2014 daemon.info sysinit: ntpd: reply from 69.129.251.133: reach 0x0f offset 0.037427 delay 0.144237 status 0x1c strat 2 refid 0xd8a581f4 rootdelay 0.020783 Fri Oct 31 23:42:45 2014 daemon.info sysinit: ntpd: reply from 167.88.119.29: reach 0x1f offset 0.038108 delay 0.145439 status 0x24 strat 2 refid 0xd133a1ee rootdelay 0.033433 Fri Oct 31 23:42:45 2014 daemon.info sysinit: ntpd: reply from 66.96.110.10: reach 0x0f offset 0.059910 delay 0.211467 status 0x24 strat 2 refid 0x84a30466 rootdelay 0.051240 Fri Oct 31 23:42:46 2014 daemon.info sysinit: ntpd: sent query to 66.96.110.10 Fri Oct 31 23:42:46 2014 daemon.info sysinit: ntpd: sent query to 50.7.96.4 Fri Oct 31 23:42:46 2014 daemon.info sysinit: ntpd: sent query to 69.129.251.133 Fri Oct 31 23:42:47 2014 daemon.info sysinit: ntpd: reply from 50.7.96.4: reach 0x1f offset 0.050978 delay 0.149475 status 0x24 strat 2 refid 0x808a8dac rootdelay 0.033005 Fri Oct 31 23:42:47 2014 daemon.info sysinit: ntpd: reply from 69.129.251.133: reach 0x1f offset 0.041368 delay 0.151829 status 0x1c strat 2 refid 0xd8a581f4 rootdelay 0.020783 Fri Oct 31 23:42:47 2014 daemon.info sysinit: ntpd: reply from 66.96.110.10: reach 0x1f offset 0.061439 delay 0.213955 status 0x24 strat 2 refid 0x84a30466 rootdelay 0.051240 Fri Oct 31 23:42:48 2014 daemon.info sysinit: ntpd: sent query to 167.88.119.29 Fri Oct 31 23:42:48 2014 daemon.info sysinit: ntpd: reply from 167.88.119.29: reach 0x3f offset 0.000036 delay 0.067676 status 0x24 strat 2 refid 0xd133a1ee rootdelay 0.033433 Fri Oct 31 23:42:49 2014 daemon.info sysinit: ntpd: sent query to 66.96.110.10 Fri Oct 31 23:42:49 2014 daemon.info sysinit: ntpd: sent query to 50.7.96.4 Fri Oct 31 23:42:49 2014 daemon.info sysinit: ntpd: sent query to 69.129.251.133 Fri Oct 31 23:42:49 2014 daemon.info sysinit: ntpd: reply from 69.129.251.133: reach 0x3f offset 0.001520 delay 0.072516 status 0x1c strat 2 refid 0xd8a581f4 rootdelay 0.020783 Fri Oct 31 23:42:49 2014 daemon.info sysinit: ntpd: reply from 66.96.110.10: reach 0x3f offset 0.005716 delay 0.102107 status 0x24 strat 2 refid 0x84a30466 rootdelay 0.051240 Fri Oct 31 23:42:50 2014 daemon.info sysinit: ntpd: sent query to 66.96.110.10 Fri Oct 31 23:42:50 2014 daemon.info sysinit: ntpd: sent query to 167.88.119.29 Fri Oct 31 23:42:50 2014 daemon.info sysinit: ntpd: sent query to 69.129.251.133 Fri Oct 31 23:42:50 2014 daemon.info sysinit: ntpd: reply from 167.88.119.29: reach 0x7f offset -0.000187 delay 0.068080 status 0x24 strat 2 refid 0xd133a1ee rootdelay 0.033433 Fri Oct 31 23:42:50 2014 daemon.info sysinit: ntpd: reply from 69.129.251.133: reach 0x7f offset 0.000072 delay 0.069366 status 0x1c strat 2 refid 0xd8a581f4 rootdelay 0.020783 Fri Oct 31 23:42:50 2014 daemon.info sysinit: ntpd: reply from 66.96.110.10: reach 0x7f offset 0.014674 delay 0.121912 status 0x24 strat 2 refid 0x84a30466 rootdelay 0.051240 Fri Oct 31 23:42:51 2014 daemon.info sysinit: ntpd: sent query to 66.96.110.10 Fri Oct 31 23:42:51 2014 daemon.info sysinit: ntpd: sent query to 69.129.251.133 Fri Oct 31 23:42:51 2014 daemon.info sysinit: ntpd: reply from 69.129.251.133: reach 0xff offset 0.004262 delay 0.079028 status 0x1c strat 2 refid 0xd8a581f4 rootdelay 0.020783 Fri Oct 31 23:42:51 2014 daemon.info sysinit: ntpd: reply from 66.96.110.10: reach 0xff offset 0.004371 delay 0.100585 status 0x24 strat 2 refid 0x84a30466 rootdelay 0.051240 Fri Oct 31 23:42:52 2014 daemon.info sysinit: ntpd: sent query to 167.88.119.29 Fri Oct 31 23:42:52 2014 daemon.info sysinit: ntpd: sent query to 69.129.251.133 Fri Oct 31 23:42:52 2014 daemon.info sysinit: ntpd: reply from 167.88.119.29: reach 0xff offset -0.000341 delay 0.067839 status 0x24 strat 2 refid 0xd133a1ee rootdelay 0.033433 Fri Oct 31 23:42:52 2014 daemon.info sysinit: ntpd: reply from 69.129.251.133: reach 0xff offset 0.001703 delay 0.073064 status 0x1c strat 2 refid 0xd8a581f4 rootdelay 0.020783 Fri Oct 31 23:42:53 2014 daemon.info sysinit: ntpd: sent query to 66.96.110.10 Fri Oct 31 23:42:53 2014 daemon.info sysinit: ntpd: sent query to 69.129.251.133 Fri Oct 31 23:42:53 2014 daemon.info sysinit: ntpd: reply from 66.96.110.10: reach 0xff offset -0.008238 delay 0.099507 status 0x24 strat 2 refid 0x84a30466 rootdelay 0.051240 Fri Oct 31 23:42:53 2014 daemon.info sysinit: ntpd: reply from 69.129.251.133: reach 0xff offset -0.009065 delay 0.099674 status 0x1c strat 2 refid 0xd8a581f4 rootdelay 0.020783 Fri Oct 31 23:42:53 2014 daemon.info sysinit: --bitmain-options 115200:32:8:40:350:4d81 -o stratum.btcguild.com:3333 -O SammyD1st_4:123456 --api-listen --api-network Fri Oct 31 23:42:53 2014 daemon.info sysinit: - init complete - Fri Oct 31 23:43:27 2014 cron.err crond[575]: time disparity of 480255 minutes detected Fri Oct 31 23:45:01 2014 cron.info crond[575]: crond: USER root pid 899 cmd /usr/bin/cgminer-monitor By that time in the log, the problem had already occurred (no hashing, hardware fault "XXX"s) Otherwise, I'm not sure I want to start taking several of my S1s apart. Whether the control board or the hashing board is broken on this one, either way I'm going to return it. I was just hoping that maybe there was a fix. Thank you! - Sam

Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [36] 37 38 39 40 »