I want my miner now.  Side note at least BTC aint $60 |
|
|
|
no update at all... Still showing "In Progress" That takes a while to update, mine said that until a few hours ago but it was actually in belgium. Looks like 24 hr delivery is possible for me. Can't be much longer until they catch up. Just realised I can't find a bloody paper clip. lol Well come tomorrow they are freaking 7 days late. |
|
|
|
Well i havent even found a block. im now scratching 60Gh/s and if KNC ever get off there ass and deliver my miner it maybe a different story. Welcome $200.00  |
|
|
|
no update at all... Still showing "In Progress"
|
|
|
|
WTF All
The factory produced 280 boxes yesterday. This was the result of a few failures which have now been addressed
We will be back to full production on monday and expect to get back to shipping over 400 a day from monday onwards
We will keep you updated as we finsih our queue in the next few days
Sam
https://www.kncminer.com/news/news-54Hold on a second i thought they said they were open on the weekends.....
You are a liar, you have no damn sources, you haven't a bloody clue where in Sweden the facility is.
Fact - Factory is open weekends - the damn Asics were delivered on a Sunday by Johan on a commercial flight, and DHL with a hand courier. 24 hours later the first prototype at full speed was filmed working.
Fact - the factory does not close at 10pm or we wouldn't have spent several days in there 24 hours around the clock.
Fact - you talk out of your arse, and when called upon started your own self-moderated thread bashing KnC for all their hard work and delete comments you don't agree with.
Fun with you has to stop now. Ciao.
So why do we have to wait till monday? Same reason when on the 9th bitcoinroma claimed there were only 1000 units that needed to be shipped, but the have shipped over 1k units already just shown in the shipping updates, and they said starting Monday they will be up to 400 plus again shipping, someone lies out there teeth is why Hold on, I hope you're not accusing me of lying there. All I did was ask, and relayed the response I was given. Don't go shooting the messenger bud, and yes the factory is open weekends as you well know because a) the chips arrived on a Sunday. I was there. b) Markus was there all last weekend with production in full swing. Not acusing you of lying HOWEVER someone is not telling the full story. This coming tuesday will be 7 days out from PROMISED delivery. I am considering on taking my banks advice and pulling for a refund. Its already NOON there and we want an update. How freaking hard is it to make a (1) Mercury miner? its only one bloody board. |
|
|
|
If you are not a level 2 it does take some time. Please give them alittle time.  |
|
|
|
pm and working out a deal.  |
|
|
|
|
yea that maybe but its not that muc. considering the trade difference.
well its been 4 days for "in processing"
|
|
|
|
|
how much for all 10. you can pm me your price if you want.
|
|
|
|
|
Could someone give me demensions on the board+heatsink all together? so i can start to make a case for when mine come in?
|
|
|
|
If you do shutdown just send me your hardware and I'll mine with it :-)
I second that notion and i will take any hardware that you are not mining with also. |
|
|
|
The curious thing about Searings is that his passed customs without issues, while mine is stuck on clearance event like many others in here Today.
I called DHL and they said anything over $2500 needs clearance and it will take a few days, possibly incurring an import tax.
So that explains why all those mercuries went right through if you check the tracking thread, they are valued at $1995.
After looking up the tariffs with DHL on the phone, it's possible they will charge 2.5% + $25 for import + DHL fees.
Obviously I would rather have taken my chance with UPS, one guy got taxed on the knc forums and he paid $32 total.
That maybe however i still havent gotten my mercurie  But i am planning a custom made case and watercooling for it. |
|
|
|
|
actually DHL does deliver here in the states. The company i work for ships via FedEx,UPS,DHL and other bigger fraight companys. DHL use to have a big presence at Bush Intercontantal Airport also. To my knowlage they are nolonger there but DHL is still around. Just not as big.
|
|
|
|
WTF All
The factory produced 280 boxes yesterday. This was the result of a few failures which have now been addressed
We will be back to full production on monday and expect to get back to shipping over 400 a day from monday onwards
We will keep you updated as we finsih our queue in the next few days
Sam
https://www.kncminer.com/news/news-54Hold on a second i thought they said they were open on the weekends.....
You are a liar, you have no damn sources, you haven't a bloody clue where in Sweden the facility is.
Fact - Factory is open weekends - the damn Asics were delivered on a Sunday by Johan on a commercial flight, and DHL with a hand courier. 24 hours later the first prototype at full speed was filmed working.
Fact - the factory does not close at 10pm or we wouldn't have spent several days in there 24 hours around the clock.
Fact - you talk out of your arse, and when called upon started your own self-moderated thread bashing KnC for all their hard work and delete comments you don't agree with.
Fun with you has to stop now. Ciao.
So why do we have to wait till monday? |
|
|
|
hmm maybe i should recheck my config. im running 54 erupters + lightcoin mining on one rig and its ticking along fine. with the standard ./bfgminer -o stratum+tcp://stratum.btcguild.com:3333 -u myuser -p 123 -S all --icarus-options 115200:1:1 --icarus-timing 3.0=100 BUT like the saying goes "if it aint broke dont fix it" O and thats 6 anker 9+1 hubs. 3 pluged into 1 anker 4-port hub and the same for the other 3. if i restart the computer i have to shutdown and restart bfgminer manually to get it to register all 54 erupters. Im debaiting on getting more.... hmmmm |
|
|
|
Can anyone give me a quick hint here? I'm trying to connect 48 block erupters distributed on 6 USB hubs on a single rig and BFGMiner doesn't load, just gets stuck at showing me the version number. I've gotten rid of 1 of 2 rigs, so all worked well before with the settings below but now maybe there are too many devices? C:\bit\b06\bfgminer.exe -o http://stratum.bitcoin.cz:3333 -u XXXX.XXXX3 -p ******* -S all --icarus-options 115200:1:1 --icarus-timing 3.0=100 This argument worked well for upto 25 block erupters, never before have I tried 48 on one machine. Any help is appreciated. what version of bfgminer you using and also are you sure that your computer is seeing all erupters? |
|
|
|
Mark day 2 for "In Process"
How can that be if they are working in batches? Surely day 2 should all be done and shipped now? Your day 2 and my mid July in the same batch? Both in process? Pfft. Not what i ment as day 2 order. I mean that its been 2 days that it has said in process.  |
|
|
|
|
Mark day 2 for "In Process"
|
|
|
|
|
Ive had a few issues with them but they have taken care of me in the long run. I am a fully verified customer of theres. So far ive been pretty happy with them.
|
|
|
|
|
Show Posts
