|
Hi Guys,
Has the fork happened yet?
Usually id suss this out myself, but there is so much back and forwards and wallet changes, i'm a bit lost with where we are.
I thought a mayor announcent would be made when the fork happened.
Thanks
J
|
|
|
|
Will you solve the problems. I am doing 100gh / s quark hash mining. I expect you to handle your wallet problems
Hi, May i ask why you are throwing 100GH/s at this coin? There is virtually no one mining it, so you could mine with 10-20 MH and make just as much coin. All you are doing is competing with yourself and leaving the diff so high no one will be able to mine this for months once you get bored and leave. Give no other miners even a look in. Last time i mined it (for nearly 3months) entire nethash never rose above 20 MH/s Crazy J |
|
|
|
|
Hi guys,
Thanks for the nodes.
Unfortunately now i'm synced and can see the current diff, along with the fact that coinexchange is in perm maintenance mode, there is no opint continuing to even try mining this coin.
Shame cos i loved mining it....ASICs kill everything....
J
|
|
|
|
Why did block reward very low.
Just is 0.000875 PRUX per block.
It does not look worth it for miner.
Hi guys, I have mined this coin right from the beginning, and much as i have always supported it, i too agree, the reward is simply to low to make any sense mining it, especially when coupled with the very low value. Dev i think you need to rework the rewards otherwise this coin is completely dead....sorry... i hope you have a re-think. J |
|
|
|
|
Hi, Does anyone have any nodes please.
Thanks J
|
|
|
|
I have started my server again but i think there is a problem sending coins. A miner from the pool have sent some coins to coinexchange.io but the coins are never received. The wallet/chain from the server is fully synced with 4 peers so its available for syncing. I hope that there will be more pools/nodes up soon so the only exchange coinexchange.io can connect in a way that we can send our coins to it. Mining from the pool was fine but due to the problems with sending the coins to coinexchange i stopped the stratum for mining until that problems are solved.
Best regards,
Erik
MineyourCoins.com
Any chance you can let us have the addnodes please Thanks J |
|
|
|
|
Now GND is now only trading on NovaExchange, which is closing soon and no longer accepts any new deposits, basically this coin is now worthless.
Since i gave away over 100,000 of this coin when i first mined it (it was at 1 sat) if any one wants to send me a few i'd greatly appreciate it.
I hodl any coins and who know perhaps it will end up back on an exchange in a year or two.
GNB address is on my profile (website)
Thanks J
|
|
|
|
There haven't been any pools for 3 years, but the link to the wallet github is in the first post.
J
I want to start OWN pool  , i need algorithm code for it.. ask any of the ccminer guys they all had ode for it in their miners years ago...djm, etc |
|
|
|
Lets say if someone were to come along and buy a bunch of Funk, should that person download and store the coins in the wallet or just leave in on the exchange? I would consider that person a hero, since the LTC/DOGE markets on Cryptopia have been closed for a week already  Well, you can always negotiate with someone who owns the coin and buy direct from him, without the need of Exchage!!! Hi Guys, I have at least 100K FUNK for sale if it helps. Can't let it go too cheaply thou. Give me a shout J |
|
|
|
|
Guys,
My wallet is open, zero connections and 1 year behind.
I will leave it open for as many hours as i can for the next 2 days.
Lets see if anyone can sync with it
J
|
|
|
|
Hello ani-chan! I want to start own pool with Animecoin (have server), but can't find pool (github etc) with this algo. Can you help me?  May be you know how to find it? PM Please. There haven't been any pools for 3 years, but the link to the wallet github is in the first post. J |
|
|
|
ANIMECOIN Added to -=::[MIX POOL]::=- http://pool.mixpool.ru/Use your wallet address as your username, and c=ANI as your password. No registration required. Miner command line: -a quark -o stratum+tcp://pool.mixpool.ru:4033 -u AM1ijVeX6PgunPvWakE5ygfBwPWCxaWiXF -p c=ANI Don't forget to use ANI as password, or your shares will be lost Don't forget to change -u once testing is complete to mine to your wallet Why is anime not showing up in your pool? Why are you suggesting using "Quark" algo, ANI has its own algo. Are you sure the pool is actually supporting ANI yet? J |
|
|
|
Glad to see some activity here!!! To make community heappy I added anime algo to tpruvot ccminer and make pull request https://github.com/tpruvot/ccminer/pull/41Compiled versions (win32 and win64) you can find here https://github.com/testzcrypto/ccminer/releases or here https://mega.nz/#!tMZi3SQL!wpWM8SftREE5aH77m1KmssW7ofbgHp2iQLySHerXu_UFor solo mining you need to add flowing lines to animecoin.conf (if animecoin.conf doesn't exists you should create it in folder where wallet.dat located), addnode lines is not required for mining but it's will help to sync wallet with network, instead USER and PASS put any your values, password must be strong: listen=1
daemon=1
server=1
rpcuser=USER
rpcpassword=PASS
rpcallowip=*
addnode=213.108.119.84:1212
addnode=195.46.187.71:1212
addnode=211.211.140.41:1212
addnode=211.210.248.193:1212
addnode=91.143.171.173:1212
addnode=2.95.233.94:1212
addnode=88.193.255.251:1212
addnode=1.227.67.183:1212
addnode=188.79.171.197:1212
Run ccminer as: ccminer -a anime -o <IP of machine where you run Anime wallet>:2121 -u <USER from animecoin.conf> -p <PASS from animecoin.conf>
Great move. So now instead of a great old coin being mined steadily through the "mining" button in the wallet, everyone with an 6 x 1080ti rig can now attack it and kill it with massive hash. If you have actually looked properly you might have found there were already some good cpu miner about I wish people would take the time to think things thru first  All we need now is a pool or 3tp keep up with the farms and put the final nail in its coffin J |
|
|
|
How about install Slothcoin-Qt.exe to another PC
and overwrite wallet.dat with backup before encrypted?
Cryptopia please...
Hello. I represent a development team that wants to maintain your decentralized economic system by mining. For this we need to know the description of the Keccak hashing algorithm that you use and the protocol of exchange with your pool. We will be very grateful if you provide this information. Hi, This coin is already being sucessfully maintained. I'm guessing you want to set up a pool to hit it with massive hashpower and kill of a wonderful veteran coin. All the info you will need will be in the github, and kecccak is used for several coins so should also be easy to find. J This is not quite true. We want to learn how to create FPGA miners. For this we need to know the exact description of the Keccak algorithm that is used and how to communicate with the pool I appologise. I should not have made assumptions Here are some links. I would be very intesrested in a FPGA keccak miner http://cryptomining-blog.com/tag/keccak/https://github.com/Max-Coin/maxcoin/wiki/Keccak-Algorithmhttps://en.wikipedia.org/wiki/SHA-3https://keccak.team/index.htmlJ |
|
|
|
Hello. What happened with GNB now? How much it cost? I don't find any information on coinmarketscap.com. Could you please give me a link on the price chart of GNB?
Thank you
Hi, Only place i have seen it is on NovaExchange, and they are closing soon, so are no longer accepting new registrations, and you cannot deposit any coins. You can still trade there if you have existing balances. https://novaexchange.com/market/BTC_GNB/Hope this helps J |
|
|
|
How about install Slothcoin-Qt.exe to another PC
and overwrite wallet.dat with backup before encrypted?
Cryptopia please...
Hello. I represent a development team that wants to maintain your decentralized economic system by mining. For this we need to know the description of the Keccak hashing algorithm that you use and the protocol of exchange with your pool. We will be very grateful if you provide this information. Hi, This coin is already being sucessfully maintained. I'm guessing you want to set up a pool to hit it with massive hashpower and kill of a wonderful veteran coin. All the info you will need will be in the github, and kecccak is used for several coins so should also be easy to find. J |
|
|
|
Hi community, Thank you @speedy for being so generous Just an update: We are currently working on creating the block explorer. We found a dev that’s going to build it As soon as we have the explorer ready, we’re listing on our first exchanges. Will keep everybody posted. Also be sure to join our TelegramHi, From day 1 until today i have had no issues with the daemon and simplewallet, but now i get this when i fire up the wallet using "unad" 17:08:49.201735 INFO Blockchain initialized. last block: 58397, d0.h0.m49.s12 time ago, current difficulty: 211445 17:08:49.207744 INFO Core initialized OK 17:08:49.209747 INFO Starting core rpc server on address 127.0.0.1:44415 17:08:49.213753 INFO Core rpc server started ok 17:08:49.216758 INFO Starting p2p net loop... 17:08:49.217759 INFO Starting node_server 17:08:59.488346 INFO [24.196.147.245:44414 OUT] Sync data returned unknown top block: 58397 -> 58433 [36 blocks (0 days) behind] 17:08:59.488346 INFO SYNCHRONIZATION started 17:09:01.136075 INFO [24.196.147.245:44414 OUT] SYNCHRONIZED OK 17:09:01.136075 INFO 17:09:01.136075 INFO ********************************************************************** 17:09:01.136075 INFO You are now synchronized with the network. You may now start simplewallet. 17:09:01.136075 INFO 17:09:01.136075 INFO Please note, that the blockchain will be saved only after you quit the daemon with "exit" command or if you use "save" command. 17:09:01.136075 INFO Otherwise, you will possibly need to synchronize the blockchain again. 17:09:01.136075 INFO 17:09:01.136075 INFO Use "help" command to see the list of available commands. 17:09:01.136075 INFO ********************************************************************** as soon as i fire up simplewallet.exe i get the following in unad. 17:09:15.217923 WARNING Connection error: bad function call 17:09:20.230268 WARNING Connection error: bad function call ....this has never happened before and i now cannot mine and my balance has been reset to zero J i then get this [wallet UNA1H7]: start_mining Error: Failed to invoke rpc method: HTTP status: 1 [wallet UNA1H7]: if i try to start mining |
|
|
|
Hi community, Thank you @speedy for being so generous Just an update: We are currently working on creating the block explorer. We found a dev that’s going to build it As soon as we have the explorer ready, we’re listing on our first exchanges. Will keep everybody posted. Also be sure to join our TelegramHi, From day 1 until today i have had no issues with the daemon and simplewallet, but now i get this when i fire up the wallet using "unad" 17:08:49.201735 INFO Blockchain initialized. last block: 58397, d0.h0.m49.s12 time ago, current difficulty: 211445 17:08:49.207744 INFO Core initialized OK 17:08:49.209747 INFO Starting core rpc server on address 127.0.0.1:44415 17:08:49.213753 INFO Core rpc server started ok 17:08:49.216758 INFO Starting p2p net loop... 17:08:49.217759 INFO Starting node_server 17:08:59.488346 INFO [24.196.147.245:44414 OUT] Sync data returned unknown top block: 58397 -> 58433 [36 blocks (0 days) behind] 17:08:59.488346 INFO SYNCHRONIZATION started 17:09:01.136075 INFO [24.196.147.245:44414 OUT] SYNCHRONIZED OK 17:09:01.136075 INFO 17:09:01.136075 INFO ********************************************************************** 17:09:01.136075 INFO You are now synchronized with the network. You may now start simplewallet. 17:09:01.136075 INFO 17:09:01.136075 INFO Please note, that the blockchain will be saved only after you quit the daemon with "exit" command or if you use "save" command. 17:09:01.136075 INFO Otherwise, you will possibly need to synchronize the blockchain again. 17:09:01.136075 INFO 17:09:01.136075 INFO Use "help" command to see the list of available commands. 17:09:01.136075 INFO ********************************************************************** as soon as i fire up simplewallet.exe i get the following in unad. 17:09:15.217923 WARNING Connection error: bad function call 17:09:20.230268 WARNING Connection error: bad function call ....this has never happened before and i now cannot mine and my balance has been reset to zero J |
|
|
|
Someone post the newest wallet!!!!!!! Sync now this coin still has potential
We'll, I'm not sure I'd go that far! I'll stick the wallet online later today along with the blockchain, although I can't sync blocks more recent than 3 weeks ago. I have one connection to the network and have left the thing running for days. Perhaps nobody is mining. Hi - got the wallet (v1.1.0. to fully sync and its happily mining away. Shame the block reward is 0Fz ! If anyone wants to test they can send me some Fz here : FDTCUkpH9Kz6dbC4739bz7AVg1UNFKkP4R. I will send it back ! Hi, have wallet too...using addnode above i am 214 weeks behind with no connections. Tried 1.5Gig blockchain download but that says needs re-indexing then fails. Do you have a working node please? J |
|
|
|
Please help me
I used to buy ANI on coinexchange and after stopping there trades they were sent to a local wallet. Now while the price is high I want to sell. The question is: In my wallet I can make a transaction only in the amount of 1200 ANI. How can I increase the size of the transaction?
The wallet periodically hangs, probably because of active mining. This is normal?
I have exactly same issue. I have to transfer in blocks of max 1250 coins. I have never heard of any fix. J |
|
|
|
|
Show Posts
