meh I take it back, I really want the penny roll  so will try one more bid. .01 btc for lot 2 |
|
|
|
damn I really wanted the penny rolls with holo's but too rich for my blood now  good luck to you guys! |
|
|
|
|
these are cool - I am going to have to get one!
|
|
|
|
They were sodl unloaded.
Engraved above and below the hologram are the public keys for a btc and ltc address. And yes...private keys for each underneath
thank you for the clarification! will contemplate on an offer. |
|
|
|
|
things to consider
1 - the customer does not want to deal with KYC
2 - they are not requiring that the full amount be from a single seller
3 - they state only large quantities will be considered - what do they consider to be a large quantity?
4 - I still think they mean 100k USD worth of BTC not 100k BTC which is astronomical - who on this planet has the cash to spend close to 1 billion USD on bitcoin. Am not saying there are not people that rich but how many are willing to put nearly 1 billion dollars into bitcoin?
|
|
|
|
question - I looked thru the sellers original post and I cannot tell if I am missing it or if it is not stated - the hologram, is there a private key behind it? were they funded? if so with what qty? or are they to funded by the buyer? either way is fine but affect the price, right? |
|
|
|
Hi Everyone! Quick update, the bitcoinpenny lot includes holograms for the DIY roll.  nice! if I win and I understand this right, this will allow the winner to load and secure btc onto the coins? if so, that will make a great gift or a later raffle even. |
|
|
|
Yes did that as well. I think I'm going to reflash the sd card. because something got broken when the hashrate was at 0. Maybe I'll even reformat the USB.
ok - I apologize if I was providing steps that you already took - just trying to remember all the hangups I had to getting mine started. I would start with the SD card before going thru the USB reformat. let me know how it goes! I hope you get back up and running soon! No worries! Flashing the card did not fix it so I deleted the Litecoin folder in the USB and transfered a new blockchain and now the node is up and syncing. I guess the blockchain got corrupted somehow, but really odd because I didn't touch anything it just happened. hopefully its not a bad usb stick |
|
|
|
Thanks,
Stryfe
For sending me threw the right path, Now There isn another Node up and running
glad I could help! what do you mean original version? the batch 1? when I got mine, I followed the provided instructions to the "T" and it did not work - that is when it was realized that the instructions did not say to use a fresh browser window and did not say you needed to power cycle the miner - I do not know if he edited it to say that now but anyways that was my issue so was just trying to help I am glad you found the solution - did not know you were using multiple routers - I do that here but I only use one as a router, the others I wired to be broadcasting the original signal vs their own. So everything in my house thinks that all my routers are the actual primary one. |
|
|
|
Yes did that as well. I think I'm going to reflash the sd card. because something got broken when the hashrate was at 0. Maybe I'll even reformat the USB.
ok - I apologize if I was providing steps that you already took - just trying to remember all the hangups I had to getting mine started. I would start with the SD card before going thru the USB reformat. let me know how it goes! I hope you get back up and running soon! |
|
|
|
|
lot #1 --- .006
lot #2 --- .003
|
|
|
|
im a total newb, anyone has advice or a video on how to open port 9333. I have a Apple Airport Xtreme router, here is some pictures of setting
what do i have to change to make it work
thanks
I do not know mac's very well but I would assume it has more to do with your router - you need to log into the router - I have never used the router in question so I am not able to verify if this is 100% correct but here is a site I found that states it walks thru how to do a port forward with your router https://portforward.com/apple/airport-extreme/So this morning the miner went to 0 hashrate (but still on) and the node offline.
I restarted everything and the miner is now mining but the node is not coming back up. I get the "node starting" screen but after 20 minutes it goes to the "node offline" screen.
when you restarted everything - did you open a new browser window? if not, try that. did you start the node via the webpage gui? if so, try this - turn off Apollo at the psu - restart it and then open a new browser window/tab and see if that helps - the node should start itself when you power cycle the miner. I had the problem where I was not aware of this and I was trying to start the node via the web gui and that was wrong. Yes, when I restarted I do it a the psu level. I did it a second time even, turned the miner off in the dashboard (node already off). Then when the LED is red flip the switch off and on but same problem. The miner goes on as normal, the node is in the "starting node" screen and then after a while goes to "node off" are you closing the browser window and opening a new one? I think that has to be done too. |
|
|
|
im a total newb, anyone has advice or a video on how to open port 9333. I have a Apple Airport Xtreme router, here is some pictures of setting
what do i have to change to make it work
thanks
I do not know mac's very well but I would assume it has more to do with your router - you need to log into the router - I have never used the router in question so I am not able to verify if this is 100% correct but here is a site I found that states it walks thru how to do a port forward with your router https://portforward.com/apple/airport-extreme/So this morning the miner went to 0 hashrate (but still on) and the node offline.
I restarted everything and the miner is now mining but the node is not coming back up. I get the "node starting" screen but after 20 minutes it goes to the "node offline" screen.
when you restarted everything - did you open a new browser window? if not, try that. did you start the node via the webpage gui? if so, try this - turn off Apollo at the psu - restart it and then open a new browser window/tab and see if that helps - the node should start itself when you power cycle the miner. I had the problem where I was not aware of this and I was trying to start the node via the web gui and that was wrong. |
|
|
|
|
well I ordered from the site where I could use the 5% off - I have more faith that site is legitimate vs the one posted by OP
|
|
|
|
people are asking one question over and over and I dont see it addressed, why are the wallets $129 with free shipping and with .01 BTC at halving at the actual website here: https://store.balletcrypto.com/collections/ballet/products/halvingyet you price them at $139 (not sure if free shipping or not) and the discount code of 5% off from minerjones can be used at your link https://www.balletmoney.com/order-form1588534630934which site is valid and which price is valid? when minerjones asked you simply said the price is 139 not 129 however on the actual ballet crypto website, they are indeed 129 not 139 |
|
|
|
|
congrats @vickersja!
I keep missing these raffles!
|
|
|
|
|
damn i missed this one! congrats to kurious!
|
|
|
|
|
congrats again K-Paxian! two wins today!
|
|
|
|
|
Show Posts
