1421
|
Bitcoin / Mining speculation / Re: Gridseed Miner
|
on: May 31, 2014, 12:23:29 PM
|
Maybe he wants to invest less and since its an introductory purchase then it should be small. Gridseeds are low power low profitability with difficulty changing all the time so get what lower price you can. 25 usd another member suggested I dont thing anyone will sell as we speak June 2014 maybe in a few months yes i too the price to drop to add afew more...
|
|
|
1422
|
Bitcoin / Pools / Re: *** GHash.IO mining pool official page ***
|
on: May 31, 2014, 12:17:43 PM
|
I have a question about the reporting of ghash.io.
I have two miners (total ~ 3TH) pointing to ghash.io and mine BTC. I also have some CEX.IO ghash (about 200KHs).
How can I check from the report how much BTC I make from mining with my miners and how much BTC I make with the CEX.IO mining.
Currently I go to BTC/Mining and i see a list of what I assume to be profit for both (minus maintenance fee which I hope it is only for the CEX.IO mining part)
Thanks
I have also a small cloud with them about 5.5 gh but its not clear to me also if you make a separate acount sent there the hash power with a voucher then you can see clearly but the 200khs cloud comparing with the 3 T your miners make its a drop in the ocean.
|
|
|
1423
|
Bitcoin / Pools / Re: *** GHash.IO mining pool official page ***
|
on: May 31, 2014, 04:06:24 AM
|
No NOT YET
even if there been many many requests. Also there is luck of information.I first see things like the introduction of DRK or the IXC trade and then have to read about it in the news. There should be an email sent to users letting them know. for instance the day its was IXC trade started in the same morning I had my ixc withdrawn to be converted elsewere... Of course in a world that we have been burned with the preorder situation, think its better to do it first and then announce it.
|
|
|
1424
|
Bitcoin / Pools / Re: Ghash.io over 33%
|
on: May 29, 2014, 05:17:16 PM
|
BTCGUILD has fees that Ghash does not, nor you can convert your NMC or IXC coins. I have guild as a backup too but need lot more to become No1 after all its a world wide opinion so mine is only a small drop all the users cant be fools
|
|
|
1425
|
Bitcoin / Mining support / Re: how can I power my antminer s1
|
on: May 29, 2014, 09:55:45 AM
|
I am also short on one PSU and found two really cheep older free market bought PSUs and I power each blade separetly.Runs fine althoght not the ideal but can be done (not overclocked)
|
|
|
1426
|
Bitcoin / Hardware / Re: S1 antminer and wifi
|
on: May 29, 2014, 06:19:18 AM
|
I run them overclocked but with cables as they were making a short of rf-cloud and my other devices like mobile telephopone netbook etc and they cant have access to the router so I abandoned it and have the usual spagetti cables moved in the garrage in a cool and away from wife´s eyes.
|
|
|
1427
|
Bitcoin / Pools / Re: *** GHash.IO mining pool official page ***
|
on: May 29, 2014, 03:41:22 AM
|
Good thing is that you can trade your altcoins where you mine and dont have to use another cryptsy like site with min withdraw. I was mining since feb 14/2/2014 to may 10th and transfering all my Dev and IXC DOGE to crypty and finally made it to collect 0.01 Litecoins so I can withdraw the balance... Its better and faster . Saw they adder IXC also
|
|
|
1429
|
Bitcoin / Mining support / Re: Bitmain AntMiner U1 Tips & Tricks
|
on: May 23, 2014, 11:32:43 AM
|
Try them one at a time.
If they all work individually, then the problem is with your powered hub.
I have similar problem BUT I run a computer old ATX PSU that powers directly the hub I have managed to run them without problems for about 10days then it would not recognise one of them and occasionally fail. I was the same time running CPU miner when they conflict but when stopped the cpuminer running without problems.
|
|
|
1430
|
Bitcoin / Hardware / Re: PSU for ANT-Miner S1s
|
on: May 23, 2014, 11:13:17 AM
|
Hello, I have two ANT-Miner S1 need setup with new PSU. This my first time to dealing with ANT-Miner before. I buy only the miner. It come with nothing else. How I need this to setup? What PSU you recommends for 2x ANT-Miner S1s? Seller suggest 1000W PSU. I think they pulling 720W? Also need I anything else for the miners setting up? I have already router with WIFI connection and also ethernet cable for direct the plugging in. But what else needed? Danke! I'm using an 850W silver-rated Ultra brand PSU. It runs two stock antminer just fine but only allows room for one Antminer to be significantly overclocked. The PSU fails with both antminers overclocked; I'm running one at 393 MHz and the other at 350 MHz. I'd recommend 900W silver-rated at minimum to run both overclocked. As long as you have the PSU and LAN cables, a router, and a computer, you have all you need to mine. There are a few antminer setup tutorials on this forum if you run into problems setting them up correctly. Get a reputable one ase with miners it will work 24/7 so will need guarantee if it fails...
|
|
|
1431
|
Bitcoin / Group buys / Re: 【LIGHTNINGASIC GROUPBUY】1.5TH - 2500 USD - FREE SHIPPING IN 48 HOURS
|
on: May 23, 2014, 08:34:12 AM
|
There is so little info about this product.
1) let us know what kind of PSU needed 2) let us know what controller can be used 3) let us know what software will run 4) let us know with current CGminer or BFGminer how it runs have you tested it
Unless someone replies on these questions then how can I will be convinced to deposit my BTC
|
|
|
1432
|
Bitcoin / Pools / Re: 3 S1's ~~ 3 Pools ? or 3 S1's ~~ 1 Pool ?
|
on: May 22, 2014, 06:52:24 PM
|
Hi all
Just a little advice to save me pool hoping and making nothing whist experimenting
I have just ordered 2 more S1's so that will make 3 when I get them, at present I have my single unit on BTCGuild, although I sometimes move it to GHash, and Slush's pool
I also have a Butterfly Labs 25GH/s thing, and a shit loads of erupters the usb sticks are mining FRC so they can stay there, and the 25GH/s is on GHash at present.
But anyway back to the question
Do I put all 3 ant's on one pool and if so which one would you guys put the 3 on if it were you.
Or do I hedge my bets and spread them, 1 on BTCGuild, 1 on GHash, and the other on Slush's pool ?
I guess a lot of you are mining multi setups so what do you do ?
Thanks guys Mark
I have 7 s1 on Ghash and when I made my calculations even for the 0 fees ghash is better to leave it there Now on the other hand since you have 3 s1s try them all for a week and see which pool is more profitable then switch all to it Publish the report if you want...
|
|
|
1433
|
Bitcoin / Pools / Re: GHASH.IO vs ELIGIUS.ST
|
on: May 22, 2014, 06:46:54 PM
|
My advice Stop mining there and go find a new home. Because it should have triggered yesterday when they finally pushed it. And that wallet addy is a bunch of pure BS spewed to make you feel like you got support. I never deleted my wallet addy or changed it and was paid like it should have worked all along.
May or May not. In some cases that process is required if there is a db entry needed to the auto payout to trigger. Same time it can also be like you said. It may take sometime even more than 30 hours but since started with them March 2014 I had 0 problems and most of all 0 fees and able to trade my Namecoins and Litecoins They promise to go for Doge trade and Devocoin trade but so far nothing I dont know how they manage to do it with the multipool available...
|
|
|
1434
|
Bitcoin / Hardware / Re: [ANN] Spondoolies-Tech - Best W/GH/s ratio - Shipping from stock
|
on: May 22, 2014, 04:59:42 PM
|
Tzortz what is the temp in your room?
Is it AC´d?
No AC. The temp in my room is 20-25C. I can have all the doors open, and makes a nice flow. Inlet in the SP10 says 35C. Wait for a couple of months and tell me again your temperatures... Tzortz I Offer free hosting in the north of Athens hi hi whatever comes for hosting never goes back LOL
|
|
|
1435
|
Bitcoin / Hardware / Re: [ANN] Spondoolies-Tech - Best W/GH/s ratio - Shipping from stock
|
on: May 22, 2014, 04:57:47 PM
|
Bear in mind dB tells you nothing about the quality of the sound in pitch, timbre, likelihood of annoying neighbours and getting official complaints from the local council.
i like the sound of my SP10. So much so I visit my old mum's much more regularly these days. "Spondoolies-Tech - bringing families together" Good enjoy the visits....
|
|
|
1436
|
Bitcoin / Group buys / Re: ***Spondoolies Tech SP10 - Shipping NOW - 1.4-1.45Th/s - $2,900***
|
on: May 19, 2014, 03:39:45 PM
|
Maybe it is that you are lucky you are in USA. In Europe things are different.
Customs is a pain in the ass, as they need the invoice to be clear everywhere. BITMAIN and the rest Chinese make it handwritten from times to times. Don't let me post pics with silly half Chinese-English writing.
------------------------------------------
yes pain in the ass as you said it Paid for the Antminer S1 with UPS 130 EURO rippoff UPS and customs brokers obligatory. Its better to buy from EU and now with Ebay global shipping program you pay the taxes in advance.... making the purchases more and more difficult. In Europe we are 400 milion people and all the miners are made in China!!! at least its a shame!!!
|
|
|
1438
|
Bitcoin / Hardware / Re: [Antminer S1 Sales open] Price changes daily, now 0.484 BTC for 180GH/s
|
on: May 17, 2014, 04:01:05 PM
|
I have made a payment for 2pcs Antminer S1 on 16/4/2014 and up to today 28 days later nothing has arrived please help
I really feel your pain. I hope this get resolved by them soon. Have you reached out to Bitmain here in the forum? I can't know the customer service problems you are having as everyone of my units was sent to me within 3 to 4 days and without an issue. Hope you find help soon! Yes they contacted me finally and said they willl sent replacements I am waiting for them to arrive ....
|
|
|
1440
|
Bitcoin / Hardware / Re: [Antminer S1 Sales open] Price changes daily, now 0.484 BTC for 180GH/s
|
on: May 13, 2014, 05:52:53 AM
|
I would like to inform the BItmain community about what happened to me with my purchase from bitmain
I am very very SORRY but there one more UNHAPPY AND SCREWED CUSTOMER OF BITMAIN
UNHAPPY AND SCREWED CUSTOMER OF BITMAIN UNHAPPY AND SCREWED CUSTOMER OF BITMAIN UNHAPPY AND SCREWED CUSTOMER OF BITMAIN
ON 16/4/2014 just before Easter I ordered 2 x S1 antminers.
I have made a payment for 2pcs Antminer S1 on 16/4/2014 and up to today 28 days later nothing has arrived please help
Order number
00120140415051311075KBr9n9xw06B7
tracking EMS (available already sent to BITMAIN MORE THAN ONE TIME)
Aparently I have lost my bitcoins lost my miners and I receive no HELP FROM BITMAIN....
I have lost one month mining plus my original of hard earned bitcoins...
I am not sure what will happen but for now am deeply dissapointed!!!!!!!
PLEASE HELP BITMAIN DONT LET YOUR CUSTOMERS DOWN.......
FIRST REPLY FROM BITMAIN
------------------------------------------------------------ Hi, Sorry for the inconvenience. We've requested EMS to double check the status and haven't get any result. I'll inform you once get any update. Thanks for your patience! Best Regards, ------------------------------------------------------------- Second reply from Bitmain
Hi, Sorry for the delay. We'll contact EMS to follow them right away and try to push them each day before getting the info. Thanks for your supportJ
-------------------------------------------------------------------
third reply from Bitmain
Hi,
Very sorry for the inconvenience. We’ve called the EMS manager and he promised to provide an answer today.(two days ago) I’ll inform you if any update. Thanks for your patience. Best Regards,
How would you rate thiS CUstoMER support
If I receive any help or compensation or refund from BITMAIN I PROMISE TO WRITE IT HERE AND EDIT MY POST
IF NOT BITMAIN HERE IS YOUR GLORY
|
|
|
|