I finally moved off dwarf to ether mine the us1 server. I haven't had a drop or load of rejects since. Dwarf aggravated me. Many times I seen that warning that's stats are delayed then same time I would lose over 25% shares that round. Then they come with 0 fee and now I was seeing it daily a delay in stats. So either way they getting the fee.🙄
Best regards D57heinz
Yes that was very annoying. Just delay in stats and then nothing but lost shares with no explanation at all. Left a bad taste in my mouth. First time I was ok it happens but then it just started happening way too often for my liking.
|
|
|
On windows you can run:
shutdown /r /f /t 0
But of course you have to configure auto login for the computer and have everything run in your startup.
Ah I just reread your OP and I'm guessing you want that command from the miner. I'm not sure if there is a switch in the miner to reboot the computer or run an external command if hash rate drops below a certain point.
|
|
|
Hmm i was hoping that it would do close to 25mhs
|
|
|
A R9 280x at 92 when mining is nothing unusual - it's just the card is a hot running card - and it probably thermal limits around 95ish.
It is actually 102c where it reaches thermal limits and shut down the computer.. tested it I probably should have said "thermal throttles" not "thermal limits". My R9 290 Sapphire Reference cards start throttling at 94, not sure what their shutdown temp is as I don't think they ever reached that. Same here I have a reference card that stays at 94 constantly while mining and throttles down to stay at 94 but I noticed that the system reports the fan at like 40-50% only. Is there some special trick to make the fans go to 80? You can use MSI Afterburner. That's what I use. My fans are blowing at around 50%, for a maximal temperature of 58°C (I have 380, not the cards you mention). I tried MSI Afterburner and they seemed to have no effect on the fan speed of the reference card. I'm guessing the guy that had it before me put some custom firmware on it or something perhaps.
|
|
|
So I went to bhphotovideo.com and preordered
2 msi rdn rx 480 8gb gpu's cost a lot less the 2000 used a cc have a 3 year msi warranty and earn points with my cc....
this is the only competition there is for bitmaintech at the moment.
I was considering it but the ship date that they have listed worried me. I just hope it's a filler date they put into the site.
|
|
|
A R9 280x at 92 when mining is nothing unusual - it's just the card is a hot running card - and it probably thermal limits around 95ish.
It is actually 102c where it reaches thermal limits and shut down the computer.. tested it I probably should have said "thermal throttles" not "thermal limits". My R9 290 Sapphire Reference cards start throttling at 94, not sure what their shutdown temp is as I don't think they ever reached that. Same here I have a reference card that stays at 94 constantly while mining and throttles down to stay at 94 but I noticed that the system reports the fan at like 40-50% only. Is there some special trick to make the fans go to 80?
|
|
|
I believe that Windows has a limitation of 6 or 7 cards per machine.
|
|
|
That's pretty cool. I've never seen one of these.
|
|
|
Is there like a molex cable or something that I can buy so that I can connect an ATX PSU to the remote on for the 750W interface board? I'd like to setup an eth rig to run off a smaller ATX power supply and then have the video cards run by the 750W and would prefer if they turned on and off together. From what I read on the 750W interface boards there's a pin and a dip switch for remote on but I'm not very technical at these things. Or perhaps there's a USB cable that I can connect to the remtoe on pin?
|
|
|
Did you try to specify the opencl platform?
On my system I had to do
ethminer -G <usual options> --opencl-platform 1
you can also try
ethminer -G --list-devices --opencl-platform 1
I think by default it uses platform 0
|
|
|
I have a bunch of these left. Where are you located? The biggest expense is the shipping cost.
|
|
|
The gtx 1070 is another option but those are sold out everywhere and have been selling for almost a month now.
2 weeks, actually, as it was released on 10 June. The 1080 is still having availability issues and it HAS been out for about a month now. The 1070 is in stock at newegg as of right now. http://www.newegg.com/Product/Product.aspx?Item=N82E16814125875
|
|
|
Looking good Phil. You weren't kidding about completely gutting your kitchen! You should've salvaged the fan from the vent hood to help cool the S9's as well!
|
|
|
Yeah, I meant 2.1Ths. Good little miner.
24 Hour Earnings: 0.00459576 35,216,384 Accepted 3 HW Errors
42 Degrees on the boards, and it's not super-heating my office. It's also sitting on the floor right next to my desk and the noise doesn't bother me at all.
I really hope that they make a S9-LN model as well!
|
|
|
Selling these two items used. Both are in excellent condition and perfect working order. I am looking for offers in USD or BTC. If escrow is requested i have no problem using one but i do not expect to incur the fee's associated nor the shipping cost. These are buyer responsibility.
-Evga GTX 980 ACX 2.0 $299
Used for less than a year, still has around 4 years left on the warranty i believe.
-ASUS GTX 980 DCU2 $199
Have had this for about 3 years. Still 2 years on that warranty.
Both are great cards. Makes another computer i have with a 280x look stupid. Also while the 780 is a gen older than the 980... its only around 20% slower from what iv'e seen. My 780 should easily rival a current 970 for much less.
Again BTC or USD is fine.
I think there's a typo with the -ASUS GTX 980 DCU2 $199
|
|
|
Block by Buransla, with his 5th Kano Block! That is our 8th block today for Father's Day! Another one with good fees at 0.56113217! Definitely makes Father's Day more enjoyable. Happy Father's Day to all the fathers out there!
|
|
|
Good find. I could use something like that for one of my rigs with the thermostat rather than having the box fan run 24/7
|
|
|
|