waffles99
|
|
March 21, 2016, 12:21:18 AM |
|
-if the user is intending to set-up 'One single Local Masternode', receiving the 10,000 Dnet set-up (requirement) from say purchasing coins via an exchange, then the incoming transaction is likely to be met with an Obfuscation transaction fee payment from the balance (before the Masternode is enabled), thus leaving say a 9999.99981844 Dnet balance remaining and causing the user to receive the following unexpected message; "Not capable masternode: Could not find suitable coins!" I solved this issue by deleting everything except the darknet.conf file in the .darknet folder of each remote node
|
|
|
|
BitcoinFX
Legendary
Offline
Activity: 2646
Merit: 1722
https://youtu.be/DsAVx0u9Cw4 ... Dr. WHO < KLF
|
|
March 21, 2016, 12:27:06 AM |
|
Reporting a potential 'conflict of obfuscation' / Masternode activation issue when users set-up a new Masternode on a 0 balance wallet address, in regards to the v1.0.2.0 release setting: "Enabled Obfuscation by default, the new default is to keep 1000 DNET mixed with 8 rounds.". I solved this issue by deleting everything except the darknet.conf file in the .darknet folder of each remote node I'm referring to instances on 'One single Local Masternode' where the 10,000 Dnet balance is actually being received to the Masternode capable address.
|
|
|
|
waffles99
|
|
March 21, 2016, 12:29:37 AM |
|
I'm referring to instances on 'One single Local Masternode' where the 10,000 Dnet balance is actually being received to the Masternode capable address.
If this error ccurs on the remote node after upgrading to 1.0.2.0
|
|
|
|
BitcoinFX
Legendary
Offline
Activity: 2646
Merit: 1722
https://youtu.be/DsAVx0u9Cw4 ... Dr. WHO < KLF
|
|
March 21, 2016, 12:36:44 AM |
|
I'm referring to instances on 'One single Local Masternode' where the 10,000 Dnet balance is actually being received to the Masternode capable address.
If this error ccurs on the remote node after upgrading to 1.0.2.0 No. The issue would only potentially apply to the set-up of a new local Masternode on a 0 balance wallet address. It is not a major issue. Just something that new folks setting up masternodes could be confused by. The devs will understand what I'm referring to here.
|
|
|
|
4x13 (OP)
Legendary
Offline
Activity: 1078
Merit: 1011
|
|
March 21, 2016, 12:57:53 AM |
|
I'm referring to instances on 'One single Local Masternode' where the 10,000 Dnet balance is actually being received to the Masternode capable address.
If this error ccurs on the remote node after upgrading to 1.0.2.0 No. The issue would only potentially apply to the set-up of a new local Masternode on a 0 balance wallet address. It is not a major issue. Just something that new folks setting up masternodes could be confused by. The devs will understand what I'm referring to here. Yes, we understand exactly what you are referring to. While we would prefer that Obfuscation be ran 100% of the time by all users wallets, this option can be disabled if needed.
|
|
|
|
AngusCanine
Legendary
Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
|
March 21, 2016, 01:03:33 AM |
|
When if at all will there be an android wallet?
|
|
|
|
jakiman
Legendary
Offline
Activity: 1638
Merit: 1011
jakiman is back!
|
|
March 21, 2016, 01:26:03 AM Last edit: March 21, 2016, 04:20:44 AM by jakiman |
|
is this worth mining still?
Yes it is. Best to mine & hold of course.
|
|
|
|
Hamukione
|
|
March 21, 2016, 09:18:34 AM Last edit: March 21, 2016, 09:57:35 AM by Hamukione |
|
Anyone here that can give a hand? I am having issues with setting up my masternodes usings PJC's VPS. The servers work fine, its just doing the setup of the wallet I am having issues with. I have made config files for the nodes but when I do "Masternode outputs" it only shows 1 masternode and not all 4 I made. Can anyone help me with this? 200 Dnet reward EDIT: NVM.. Getting help tomorrow Thanks though.
|
Pinch.Network - Join the airdrop now for free! No waitlist, no points. Guaranteed airdrop by claiming a free NFT.
|
|
|
borris123
|
|
March 21, 2016, 09:29:19 AM |
|
Anyone here that can give a hand? I am having issues with setting up my masternodes usings PJC's VPS. The servers work fine, its just doing the setup of the wallet I am having issues with. I have made config files for the nodes but when I do "Masternode outputs" it only shows 1 masternode and not all 4 I made. Can anyone help me with this? 200 Dnet reward link to setup guide in my sig.
|
|
|
|
cryptomaxsun
Legendary
Offline
Activity: 2744
Merit: 1387
Ukrainians will resist
|
|
March 21, 2016, 09:39:02 AM |
|
how long to wait for payment from Masternode ?
|
❘|❘ Cлaвa Укpaинe! ❘|❘ Glory to Ukraine! ❘|❘ ❘|❘ КaPФaгeн дoлжeн быть paзpyшeн ❘|❘
|
|
|
borris123
|
|
March 21, 2016, 09:45:49 AM |
|
how long to wait for payment from Masternode ?
12 - 24 hours
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
|
March 21, 2016, 11:26:43 AM |
|
Reporting a potential 'conflict of obfuscation' / Masternode activation issue when users set-up a new Masternode on a 0 balance wallet address, in regards to the v1.0.2.0 release setting: "Enabled Obfuscation by default, the new default is to keep 1000 DNET mixed with 8 rounds."
- If the user is intending to set-up 'One single Local Masternode', receiving the 10,000 Dnet set-up (requirement) from say purchasing coins via an exchange, then the incoming transaction is likely to be met with an Obfuscation transaction fee payment from the balance (before the Masternode is enabled), thus leaving say a 9999.99981844 Dnet balance remaining and causing the user to receive the following unexpected message; "Not capable masternode: Could not find suitable coins!"
Which can ofc be easily resolved by sending just 1 more Dnet to the same address and then making a new transaction of 10,000 Dnet to the same (your own) wallet address to allow for successful Masternode activation.
+1, this is what I meant earlier. Currently the only workaround is to turn off obfuscation as soon as the wallet starts and hope that you're not late. It should be disabled by default or at least there should be a switch in the .conf file.
|
Not your keys, not your coins!
|
|
|
borris123
|
|
March 21, 2016, 11:28:55 AM |
|
Reporting a potential 'conflict of obfuscation' / Masternode activation issue when users set-up a new Masternode on a 0 balance wallet address, in regards to the v1.0.2.0 release setting: "Enabled Obfuscation by default, the new default is to keep 1000 DNET mixed with 8 rounds."
- If the user is intending to set-up 'One single Local Masternode', receiving the 10,000 Dnet set-up (requirement) from say purchasing coins via an exchange, then the incoming transaction is likely to be met with an Obfuscation transaction fee payment from the balance (before the Masternode is enabled), thus leaving say a 9999.99981844 Dnet balance remaining and causing the user to receive the following unexpected message; "Not capable masternode: Could not find suitable coins!"
Which can ofc be easily resolved by sending just 1 more Dnet to the same address and then making a new transaction of 10,000 Dnet to the same (your own) wallet address to allow for successful Masternode activation.
+1, this is what I meant earlier. Currently the only workaround is to turn off obfuscation as soon as the wallet starts and hope that you're not late. It should be disabled by default or at least there should be a switch in the .conf file. enableobfuscate=0 that will disable it
|
|
|
|
BitcoinFX
Legendary
Offline
Activity: 2646
Merit: 1722
https://youtu.be/DsAVx0u9Cw4 ... Dr. WHO < KLF
|
|
March 21, 2016, 11:37:27 AM |
|
Reporting a potential 'conflict of obfuscation' / Masternode activation issue when users set-up a new Masternode on a 0 balance wallet address, in regards to the v1.0.2.0 release setting: "Enabled Obfuscation by default, the new default is to keep 1000 DNET mixed with 8 rounds."
- If the user is intending to set-up 'One single Local Masternode', receiving the 10,000 Dnet set-up (requirement) from say purchasing coins via an exchange, then the incoming transaction is likely to be met with an Obfuscation transaction fee payment from the balance (before the Masternode is enabled), thus leaving say a 9999.99981844 Dnet balance remaining and causing the user to receive the following unexpected message; "Not capable masternode: Could not find suitable coins!"
Which can ofc be easily resolved by sending just 1 more Dnet to the same address and then making a new transaction of 10,000 Dnet to the same (your own) wallet address to allow for successful Masternode activation.
+1, this is what I meant earlier. Currently the only workaround is to turn off obfuscation as soon as the wallet starts and hope that you're not late. It should be disabled by default or at least there should be a switch in the .conf file. enableobfuscate=0 that will disable it Yes adding enableobfuscate=0 in the .conf should disable it. However, in the 'tested' new MN instance, it did not. Hence, why I'm reporting the issue.
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
|
March 21, 2016, 11:38:09 AM |
|
enableobfuscate=0
that will disable it
It works, thanks!
|
Not your keys, not your coins!
|
|
|
BitcoinFX
Legendary
Offline
Activity: 2646
Merit: 1722
https://youtu.be/DsAVx0u9Cw4 ... Dr. WHO < KLF
|
|
March 21, 2016, 11:43:55 AM |
|
enableobfuscate=0
that will disable it
It works, thanks! Indeed. In general this function will work OK. However, IMHO Obfuscation Mixing should remain an optional choice for the user. Some users won't want this feature enabled automatically. Perhaps this should be put to a MN vote, following 'testing' this in the current release ?
|
|
|
|
cryptomaxsun
Legendary
Offline
Activity: 2744
Merit: 1387
Ukrainians will resist
|
|
March 21, 2016, 12:01:17 PM |
|
Launched mastenodes more than 26 hours ago, in the active list is. Payments not. If every day is generated 1440 blocks, and masternodes currently 567, then every 9-10 hours, payment must occur. what's wrong? why so long no payments?
|
❘|❘ Cлaвa Укpaинe! ❘|❘ Glory to Ukraine! ❘|❘ ❘|❘ КaPФaгeн дoлжeн быть paзpyшeн ❘|❘
|
|
|
borris123
|
|
March 21, 2016, 12:10:43 PM Last edit: March 21, 2016, 12:53:21 PM by borris123 |
|
Launched mastenodes more than 26 hours ago, in the active list is. Payments not. If every day is generated 1440 blocks, and masternodes currently 567, then every 9-10 hours, payment must occur. what's wrong? why so long no payments?
I still haven't got a payment for one i set up other day but says it's active so that's all you can really go off. You get one soon edit. I just restarted controller wallet and it said expired. Trying restarts of it now.
|
|
|
|
cryptomaxsun
Legendary
Offline
Activity: 2744
Merit: 1387
Ukrainians will resist
|
|
March 21, 2016, 03:37:28 PM |
|
After 30 hours of payment received 83.33 coins.
|
❘|❘ Cлaвa Укpaинe! ❘|❘ Glory to Ukraine! ❘|❘ ❘|❘ КaPФaгeн дoлжeн быть paзpyшeн ❘|❘
|
|
|
4x13 (OP)
Legendary
Offline
Activity: 1078
Merit: 1011
|
|
March 21, 2016, 04:37:13 PM |
|
This initial period of time is always longer as the Masternode has to earn the weight to participate in the random drawing of the Masternode Reward payment.
|
|
|
|
|