StakeBox
|
|
March 17, 2016, 09:04:15 PM |
|
Can I suggest putting together a quick guide on how to set up your wallets with the optimal settings to help the network? Many are unfamiliar with this and it would probably go a long way.
That is a great idea. Now that I am done with the latest wallet, I do have a few other duties that got neglected recently, but should be able to get something like that together over the next few days.
|
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
jk9694
|
|
March 18, 2016, 05:00:06 AM |
|
************ Masternode Hosting Now Available ************* Coin-Server.com has been working hard. This week we officially switched to a full 1Gb fiber connection, replaced all of our switches with shiny brand new gigabit switches, fired up a new router to support it all, and in conjunction with that we were able to add support for IPV6. With our services being IPV6 enabled now, we wanted to offer others who have IPV6 support or a 4to6 Tunnel the ability to have masternodes on IPV6 addresses. If you are interested in one of these, they are 2$ (approx. 0.0047 BTC) each for a 30 day contract, payments can be made through coinbase. Shoot me a PM if you would like to have one setup for you or if you have questions. Our current available servers allow us to have about 60 of these running at one time and we have plans to expand, and if all goes well we will have dedicated order forms here soon.
|
|
|
|
Grandpa Jones
|
|
March 18, 2016, 05:04:00 AM |
|
************ Masternode Hosting Now Available ************* Coin-Server.com has been working hard. This week we officially switched to a full 1Gb fiber connection, replaced all of our switches with shiny brand new gigabit switches, fired up a new router to support it all, and in conjunction with that we were able to add support for IPV6. With our services being IPV6 enabled now, we wanted to offer others who have IPV6 support or a 4to6 Tunnel that ability to have masternodes on IPV6 addresses. If you are interested in one of these, they are 2$ (approx. 0.0047 BTC) each for a 30 day contract, payments can be made through coinbase. Shoot me a PM if you would like to have one setup for you or if you have questions. Our current available servers allow us to have about 60 of these running at one time and we have plans to expand, and if all goes well we will have dedicated order forms here soon. Good timing because the mp-hosting site is down.
|
Synergy Dev Team
|
|
|
cryptohunter
Legendary
Offline
Activity: 2100
Merit: 1167
MY RED TRUST LEFT BY SCUMBAGS - READ MY SIG
|
|
March 18, 2016, 05:08:28 AM |
|
************ Masternode Hosting Now Available ************* Coin-Server.com has been working hard. This week we officially switched to a full 1Gb fiber connection, replaced all of our switches with shiny brand new gigabit switches, fired up a new router to support it all, and in conjunction with that we were able to add support for IPV6. With our services being IPV6 enabled now, we wanted to offer others who have IPV6 support or a 4to6 Tunnel the ability to have masternodes on IPV6 addresses. If you are interested in one of these, they are 2$ (approx. 0.0047 BTC) each for a 30 day contract, payments can be made through coinbase. Shoot me a PM if you would like to have one setup for you or if you have questions. Our current available servers allow us to have about 60 of these running at one time and we have plans to expand, and if all goes well we will have dedicated order forms here soon. Is it possible to make some kind of script with a front end with a few fields to fill in? then click set up and it just does it?
|
|
|
|
jk9694
|
|
March 18, 2016, 05:12:40 AM |
|
Yes, completely possible, but time is involved and I have a long laundry list of items to complete. Got to fit that in somewhere. However I have these ready to go, so they can be setup quickly.
|
|
|
|
DRPD
Legendary
Offline
Activity: 1148
Merit: 1001
|
|
March 18, 2016, 05:16:03 AM |
|
....
Good timing because the mp-hosting site is down.
not for me i can access all my servers the website and the account management without a problem!
|
|
|
|
cryptohunter
Legendary
Offline
Activity: 2100
Merit: 1167
MY RED TRUST LEFT BY SCUMBAGS - READ MY SIG
|
|
March 18, 2016, 05:17:22 AM |
|
Yes, completely possible, but time is involved and I have a long laundry list of items to complete. Got to fit that in somewhere. However I have these ready to go, so they can be setup quickly.
Ok great please look into it after the laundry
|
|
|
|
ainv42
Legendary
Offline
Activity: 980
Merit: 1015
|
|
March 18, 2016, 05:32:26 AM |
|
THey everyone. The new wallet v1.0.2.0 is up on https://github.com/Darknet-Crypto/Darknet/releases now for all of you self compilers. I am working to get the precompiled binaries up there now, they should all be available by the end of the day. Changes include: Fixed the block rewards, at block 86400 miners will get 175 DNET and Masternode will get 50 DNET, as was supposed to be the case starting at block 43200. Added a checkpoint. Changed Obfuscate to Obfuscation. Fixed the time the final budget is submitted, it is now 2 days before the superblock. Enabled Obfuscation by default, the new default is to keep 1000 DNET mixed with 8 rounds, there will be a very small transaction fee associated with this, we are talking like .0002 DNET. We need this in order for mixing to work at all. Fixed the transifex URL, where users can contribute to translations. Added seednodes, shouldn't need to add nodes in the darknet.conf anymore. Along with a lot of cleanup of comments in the code. This is a mandatory update, everyone will need to be on it by block 86400, the earlier the better. There is a function that enables only sending Masternode payments to updated Masternodes. If you run "spork show" you will see that the output for SPORK_10_MASTERNODE_PAY_UPDATED_NODES is 1458752907. That is about a week from today, I just changed it now, so that everyone will continue receiving Masternode payments as usual. If you haven't upgraded your Masternode wallet by then you will start to miss payments. Thanks! Awesome work. Hi! After the upgrade, the purse no payment for masternod. On command masternod list, it operates on the network, and work.
|
|
|
|
pjcltd
Legendary
Offline
Activity: 1778
Merit: 1003
NodeMasters
|
|
March 18, 2016, 06:59:31 AM |
|
....
Good timing because the mp-hosting site is down.
not for me i can access all my servers the website and the account management without a problem! Yep nothing wrong with my servers guys
|
|
|
|
Hamukione
|
|
March 18, 2016, 01:20:05 PM |
|
Someone dump some coins on me please. 1275 sat buy
|
Pinch.Network - Join the airdrop now for free! No waitlist, no points. Guaranteed airdrop by claiming a free NFT.
|
|
|
kokokoin
|
|
March 18, 2016, 01:31:23 PM |
|
What means status 'EXPIRED' on masternodes?
|
|
|
|
electricretard
|
|
March 18, 2016, 01:34:20 PM |
|
win wallet link in OP doesn't work. Gives a 404
|
|
|
|
DRPD
Legendary
Offline
Activity: 1148
Merit: 1001
|
|
March 18, 2016, 01:38:59 PM |
|
win wallet link in OP doesn't work. Gives a 404
use the download from github (latest version 1.02) https://github.com/Darknet-Crypto/Darknet/releasesbtw. only 5.7 btc to 2k on brex, looks very good for me
|
|
|
|
jk9694
|
|
March 18, 2016, 04:00:11 PM |
|
What means status 'EXPIRED' on masternodes?
This means that your node is not online, you can try restarting it. Verify from an online port scan that port 51472 is open to the masternode. If it is not open, they will go to Missing and then to Expired.
|
|
|
|
Vaxa
|
|
March 18, 2016, 07:47:09 PM |
|
What means status 'EXPIRED' on masternodes?
This means that your node is not online, you can try restarting it. Verify from an online port scan that port 51472 is open to the masternode. If it is not open, they will go to Missing and then to Expired. I have updated my masternodes on mp-hosting to latest versions. My controller wallet and configuration files were not changed. After i start all my MN's withs start-many, they get status 'ENABLED' then 'EXPIRED', then 'MISSING'. I tried several times and result is the same. I scanned port 51472 and it is open.
|
|
|
|
jk9694
|
|
March 18, 2016, 08:36:10 PM |
|
What means status 'EXPIRED' on masternodes?
This means that your node is not online, you can try restarting it. Verify from an online port scan that port 51472 is open to the masternode. If it is not open, they will go to Missing and then to Expired. I have updated my masternodes on mp-hosting to latest versions. My controller wallet and configuration files were not changed. After i start all my MN's withs start-many, they get status 'ENABLED' then 'EXPIRED', then 'MISSING'. I tried several times and result is the same. I scanned port 51472 and it is open. Did you check the port from the node itself of use an online tool for the scan to check it? I had that same problem with mine, come to find out it was a routing issue. One thing I did to help monitor what was going on there was to add my master nodes as a peer, then I could ensure the connectivity to them.
|
|
|
|
Vaxa
|
|
March 18, 2016, 08:55:47 PM |
|
What means status 'EXPIRED' on masternodes?
This means that your node is not online, you can try restarting it. Verify from an online port scan that port 51472 is open to the masternode. If it is not open, they will go to Missing and then to Expired. I have updated my masternodes on mp-hosting to latest versions. My controller wallet and configuration files were not changed. After i start all my MN's withs start-many, they get status 'ENABLED' then 'EXPIRED', then 'MISSING'. I tried several times and result is the same. I scanned port 51472 and it is open. Did you check the port from the node itself of use an online tool for the scan to check it? I had that same problem with mine, come to find out it was a routing issue. One thing I did to help monitor what was going on there was to add my master nodes as a peer, then I could ensure the connectivity to them. I used online port scanner. All my masternodes listed in controller's wallet conf file as addnode.
|
|
|
|
4x13 (OP)
Legendary
Offline
Activity: 1078
Merit: 1011
|
|
March 18, 2016, 09:33:49 PM |
|
so, your Node is updated as well as your controller wallet to v1.0.2.0?
|
|
|
|
Vaxa
|
|
March 18, 2016, 10:13:04 PM |
|
so, your Node is updated as well as your controller wallet to v1.0.2.0?
My masternodes were updated but controller wallet was v1.0.1.0. Now i get compiled wallet for Windows so my controller wallet is also up to date. Let's see if it fix this problem.
|
|
|
|
OKorator
|
|
March 18, 2016, 10:36:08 PM |
|
While installing wallet, it syncs and then closes. Once I restart, it has to sync again. This happen to anyone else?
|
If you like my work, please donate OKcash through our Discord Bot or PD9vUyDVZHxEJDvpDU9h3KDehgGayP4JKH I rain and donate back most funds! OKorator@gmail.com Twitter: @okcashorator
|
|
|
|