[ANN][PIVX] - PRIVATE INSTANT VERIFIED TRANSACTION - PROOF OF STAKE - ZEROCOIN

[4x13]

Mine has been crashing. I don't run a master-node.  Worked at first for about 14 hours then crashed. Been crashing everyday since, almost every 12 to 16 hours... Restarted almost everyway possible--fresh starts and partial deletes. Used two different backups for wallet.dat and got the same results... just crashed as I was typing this...

What OS? Have you used a wallet.dat backup from before v2.1.1.0??

[1715656387]

1715656387

[1715656387]

1715656387

[Lercker]

Win 10, I used one from May. It started to load v2.0.4/5? wallet(Dnet amount reflected an amount from staking version) then crashed without completely loading. The backup I used most of the time was from right before v2.0.1...

[jakiman]

I'm having the same issue with my main masternode controller / stake wallet.  (Windows 10 x64)
Tried various wallet & chain backups (even pre-PoS) but keeps crashing after running for a while.

This issue happened today after the stall resumed.
During the stall, I created 5 new addresses & sent them 10K DNET each.
Then I realizd block wasn't moving... So I left it as is...
Today, wallet was constantly crashing.
So I went back to old wallet backup. (taken before creating the 5 new addressses)
Then I created 5 new addresses and resent those 5 x 10K to the 5 new addresses.
With that, I was able to start up 5 new masternodes. But later, it crashed again.
Getting quite annoyed as my masternodes hasn't been running for hours now.
Would the stuff I did above caused some issues with my wallet or payments?

Zapping the wallet didn't improve things.
Now I'm resyncing it from scratch to see if that'll fix it...

Maybe I should just start from a brand new wallet and transfer all my coins to a whole new wallet?
(but yeah, it would be a pain in the butt setting up all my MNs again)

[werwortmann]

I'm having the same issue with my main masternode controller / stake wallet.  (Windows 10 x64)
Tried various wallet & chain backups (even pre-PoS) but keeps crashing after running for a while.

This issue happened today after the stall resumed.
During the stall, I created 5 new addresses & sent them 10K DNET each.
Then I realizd block wasn't moving... So I left it as is...
Today, wallet was constantly crashing.
So I went back to old wallet backup. (taken before creating the 5 new addressses)
Then I created 5 new addresses and resent those 5 x 10K to the 5 new addresses.
With that, I was able to start up 5 new masternodes. But later, it crashed again.
Getting quite annoyed as my masternodes hasn't been running for hours now.
Would the stuff I did above caused some issues with my wallet or payments?

Zapping the wallet didn't improve things.
Now I'm resyncing it from scratch to see if that'll fix it...

Maybe I should just start from a brand new wallet and transfer all my coins to a whole new wallet?
(but yeah, it would be a pain in the butt setting up all my MNs again)

I cant keep my masternodes or controller wallet up.
They just keep crashing.
I delete everything including wallet on my masternodes, no difference

[jakiman]

Actually, I'm also having issues with my masternodes staying up. (on MP Hosting)
Even with full resync after deleting everything except conf file.
It'll look all well and good, then shortly after, it's crashed...
This issue only started after the stall/resume today.

[DRPD]

Most of my masternodes have crashed also after the stall. Most wouldn't even start back up either.
So I deleted everything except darknet.conf and resynced from scratch. Seems to have fixed them.

It sure has been a busy 2 weeks for everyone involved with DNET.

yep same here with most of my my masternodes ....
and the windows/controller wallet is regularly crashing after about 10 -12 hrs runtime ....

[DRPD]

Actually, I'm also having issues with my masternodes staying up. (on MP Hosting)
Even with full resync after deleting everything except conf file.
It'll look all well and good, then shortly after, it's crashed...
This issue only started after the stall/resume today.

exactly the same here.
it was all good until the blockchain stall as far i can tell.

[jakiman]

Okay. It definitey isn't the downloaded blockchain as even the known good one from my other Windows wallet is crashing when used with my main controller's wallet. So I guess it's either the wallet itself or the transactions that occurred with them. I have a gut feeling it's the latter as even my previously working wallet backup crashes now. I might try a salvage wallet but yeah, I'll lose all the labels which would suck...

[tylerderden]

We are trying to research the issue with corrupting and crashing wallets.

Is anyone having issues with Wallets crashing, that is NOT using that wallet to run a masternode (either local or remote masternodes). Just staking??

My wallet is running great, it only crashed on that wallet version that was corrupting wallet.dats. but I'm not running any masternodes and I haven't staked once but that's probly because my stake weight is in the negative, I have managed to get back 431 coins though lol! I just spent several hours trying to recover my coins, pretty sure they got orphaned during one of the forks. Since the wallet is defaulted to back itself up alot I had probly 40 back ups, I checked the dates on Bittrex then found all of the back ups from the day before, the day of, and the day after the transactions went out, imported a shit ton of .dats in hopes that one of them would have the private key for one of the address that I was using to withdraw but no deal, how that one address is the only one I don't have the key to and all of my small test transactions came through on another address but none of the big transfers is puzzling. So I have issues with 2 addresses, one that shows up on the block explorer but the private keys are mia and another that the big transfers aren't on the Explorer, only record is on my Bittrex account. So anyhow got the wallet completely rebuilt, all of the labels sorted out and sent a few coins from Bittrex, finally at least everything's working, but I'm not going to get too comfortable because it was all working before and confirmed in my wallet then poof got all forked up


         08/10/2016   DNET 4732.27123882   Completed
.       Address: DPAeb34bEZ9FfBh8Qt391UmHNhZWdzL27q
        TxId: b1a48c0214460ab94b5e46d2ef1e411a35213eab9277ee090d20841a4f9ab8c0

 That's the one that only the small txs stuck, if someone has an urge to do some Scooby-Doo business there you go
If anybody has any ideas I'm open for suggestions, ive literally tried everything I'm pretty sure. For now I gotta chill for a bit, that was exhausting

[boy2k]

Hi all,
great to see the coin working again!

Do we have any ETA on masternode fixes? They don't stay up for more than an hour on average before going missing.
Kinda dead in the water unless you baby sit them...

[muchoman]

Wallet still crashes for me too, did dumpprivkey-importprivkey, does not help.

[Tecem]

My masternode wallet isn't syncing. It stays at 8 hours behind. Now I restarted and its 9 hours behind. Looks like its stuck at block 264538. When I check http://178.254.23.111/~pub/DN/DN_masternode_payments_stats.html I see there are new blocks. On my pc I did a full new resent but it crashes all the time.

[borris123]

windows and linux node wallets crashing.


this is the debug for when it freezes in windows turning a node on.

2016-08-22 11:42:35 CActiveMasternode::Register() - RelayElectionEntry vin = CTxIn(COutPoint(670b2c66f7c3085aed0a316dfdb913bddd9265d362ca497a3e0ec8ca396d2516, 1), scriptSig=)
2016-08-22 11:42:37 CActiveMasternode::Register() - Adding to Masternode list
    service: 192.99.217.120:51472
    vin: CTxIn(COutPoint(028daa3945a7f9e3aca085aa128d9fc405584c8f78afaeea44d30958aeb602a6, 0), scriptSig=)
2016-08-22 11:42:37 CActiveMasternode::Register() - RelayElectionEntry vin = CTxIn(COutPoint(028daa3945a7f9e3aca085aa128d9fc405584c8f78afaeea44d30958aeb602a6, 0), scriptSig=)
2016-08-22 11:42:37 CMasternodePaymentWinner::IsValid - Unknown Masternode 6eeb8cff42f2d7376c14f929278295a4490e8246e7a0df5b533380be29a0ea19-1
2016-08-22 11:42:37 CMasternodePaymentWinner::IsValid - Unknown Masternode 6eeb8cff42f2d7376c14f929278295a4490e8246e7a0df5b533380be29a0ea19-1
2016-08-22 11:42:37 CMasternodePaymentWinner::IsValid - Unknown Masternode d1f39c09081d46039c34c0199ffe5430038547079d284e028f408ce8a75b9422-1
2016-08-22 11:42:37 CMasternodePaymentWinner::IsValid - Unknown Masternode 1ed36b70363e123c7725e8dc1fa33c28c9b825cdaac5b8edfbb86897da394324-1
2016-08-22 11:42:37 CMasternodePaymentWinner::IsValid - Unknown Masternode d327397aa5bf79e097a26f47b0749d5f1eecd81444f056170102268fdfc45fd5-0
2016-08-22 11:42:37 CMasternodePaymentWinner::IsValid - Unknown Masternode 1ed36b70363e123c7725e8dc1fa33c28c9b825cdaac5b8edfbb86897da394324-1
2016-08-22 11:42:38 CMasternodePaymentWinner::IsValid - Unknown Masternode d327397aa5bf79e097a26f47b0749d5f1eecd81444f056170102268fdfc45fd5-0

[jakiman]

Okay. I may have fixed my main controller/stake windows wallet from crashing.
Well, it's running the longest so far today. Over 15mins without a crash!

Basically, it's due to a corrupt or incorrect wallet.dat it seems.

What I did was get a known good wallet.dat backup and a known good blockchain backup then starting it with -zapwallettxes. (which keeps the labels)
After this, I ended up with a different number of coins compared to initiating the zapwallettxes after starting up the wallet via tools - repair wallet.
(if you don't have a blockchain backup, I guess you'll have to resync from scratch)

For the first time today, my wallet is able to go into "Staking Active" state as well.
With the same block hash as MN info page. So far so good!

[DRPD]

no way to fix crashing mn's atm.

i just deleted all files incl. wallet.dat. -> complete new install -> sync from scratch on all mn's -> running/syncing for maybe ~3 hrs -> crash all down now.

waiting for a new version .....

[muchoman]

no way to fix crashing mn's atm.

i just deleted all files incl. wallet.dat. -> complete new install -> sync from scratch on all mn's -> running/syncing for maybe ~3 hrs -> crash all down now.

waiting for a new version .....

Sad but true.

[q327K091]

is this windows specific issue ? have 47 nodes 0 problem (linux)

[borris123]

is this windows specific issue ? have 47 nodes 0 problem (linux)

Nope my nodes on mphosting are doing it as well. Not all of them tho.

[B1tUnl0ck3r]

Contrary to you guys on my side everything is working perfectly. I have no problems, no crash. yesterday I started with fresh brand new wallet, wired coins, launch masternode... I am just waiting the first payement to be certain. However I have no crashes what's so ever win7 64 & debian 32...

Did you really use a wallet from before the switch to POS? maybe you should create a brand new clean wallet.dat and send your coins there from your current one... just and idea.

I hope your issues will be resolved.

[jamcrypt]

So, why did this flop?