SEGWIT LTC.TBDICE.ORG 0.5% fee SOLO MM LTC/DGE POOL 3K+ LTC/7K+ DGE blks solved

[jrc209]

I just started mining solo with an L3+ can someone please make sure my config is right?

stratum+tcp://tbdice.org:13333

LhcBgsqz81443sdqS43nhkzB7avjrNCeHx.1

DH4s7RANEBSzUtVWhEa6nMDMvrbhE8nrRq


seems to be hashing but nothing shows under user page as of yet

[1714094330]

1714094330

[1714094330]

1714094330

[1714094330]

1714094330

[1714094330]

1714094330

[1714094330]

1714094330

[loshia1974]

You are ok
LhcBg...NCeHx   Pool   520M / 0.000%
But you have to search pool thread in order to make your miner to sen Doge address. It is easy.
Good luck
Best
Loshia

[loshia1974]

I was solo mining using an address that started with M and found block 1398528. On the statistics page the address didn't appear red, so I thought everything was great until after the block was found. Can you assist with this? Thank you!

Hi,
Just a couple of posts above
https://bitcointalk.org/index.php?topic=1290219.msg31405831#msg31405831

I pointed out that M addresses are not ok. Pool home page does not say they are ok also. It is true that statistics page does not sohow them in red -my bad. Any way I am with limited internet connectivity on vacation for 10 days. I can not resolve your issue until I am back. So please be patient and wait until 15 of April.
Best
Loshia

Thank you very much. Have a nice vacation!

Please PM me your M address which found a block and L address to send you coins tomorrow.
Best
Loshia

[loshia1974]

mackb-1,
You Got PM with TX details. 24.89381341 LTC are on the way

TO ALL: PLEASE DO NOT USE M ADDRESSES ANYMORE
I do see that there are still people using them
Best
Loshia

[philipma1957]

mackb-1,
You Got PM with TX details. 24.89381341 LTC are on the way

TO ALL: PLEASE DO NOT USE M ADDRESSES ANYMORE
I do see that there are still people using them
Best
Loshia

So  I can't mine with you.

I have older addresses but not via wallets I control.

All wallets I control  are  M

[TheYankeesWin!]

I use a converted M on my trezor


MPpASWHRxZJEesB1yzEb382SHBBZDuS1eK

Then I use the P2SH Converter


P2SH Value:
MPpASWHRxZJEesB1yzEb382SHBBZDuS1eK
Mainnet p2sh address (deprecated):





3Hc28csU1SSorMu7t7FFDUn2xUb7D7Evbj

You should try that.



MWxsXgQXomddd4kjpGynNUhaTeDpy4QZLi


P2SH Value:
MWxsXgQXomddd4kjpGynNUhaTeDpy4QZLi

Mainnet p2sh address (deprecated): 3QkjDnzZrenCpZUqiPzSYqTB8wdNtWxpN2

[philipma1957]

mackb-1,
You Got PM with TX details. 24.89381341 LTC are on the way

TO ALL: PLEASE DO NOT USE M ADDRESSES ANYMORE
I do see that there are still people using them
Best
Loshia

Gave you 5 merit points for being a standup guy.

So is the yankees win

correct

I can convert a m to a 3?


MWxsXgQXomddd4kjpGynNUhaTeDpy4QZLi






P2SH Value:
MWxsXgQXomddd4kjpGynNUhaTeDpy4QZLi

Mainnet p2sh address (deprecated): 3QkjDnzZrenCpZUqiPzSYqTB8wdNtWxpN2

I did a test send  of 0.06ltc  to tip the yankees win

it did show up


so  can I use an address with a 3?


Looks to me the people below need to convert to 3

User   MM Addr.   1 min   5 mins   60 mins   1 day   7 days   Best Share
MVGzJb11QMQFC17nxneyDSqzxtghzxyFx4   Pool   5.93M / 0.019%   5.72M / 0.121%   5.49M / 0.171%   5.44M / 0.200%   3.64M / 0.714%   49.65228
MSWxAULLUmvaibwFdDCkwoVg7m9kBcRqkz   Pool   7.63K / 0.000%   3.88K / 0.000%   2K / 0.000%   2.3K / 0.000%   2.74K / 0.000%   0.02904
MMMwb69rTmU6qhp3or5KWpGE7VGysTRfnN   Self   1.36M / 0.013%   1.47M / 0.137%   1.67M / 0.156%   1.69M / 0.116%   1.11M / 0.119%   29.63048
MK87VRH67QqM9LZwGJ2P1i7YEQbcSgN7NV   Pool   1.47M / 0.000%   1.36M / 0.029%   1.34M / 0.228%   1.36M / 1.189%   911K / 3.073%   9.07984
MJLqYhWzmapgYCE8Ma7AnkDeZNP9bAZj9E   Self   3M / 0.010%   2.81M / 0.241%   2.72M / 0.594%   1.38M / 8.650%   602K / 19.859%   27.52886
MGCtZhsM51Z3ndEsuR4faL6LmaUSRjUNxp   Pool   1.48M / 0.000%   1.34M / 0.000%   1.33M / 0.054%   1.36M / 0.598%   1.2M / 0.383%   4.89435
MA4G1Mq5DNZC8kjjRSiLnAfb4ZNbZTkEw8   Self   1.69M / 0.026%   1.41M / 0.262%   1.34M / 0.242%   1.3M / 9.225%   861K / 23.978%   6.81918
M9Sxtv7N1aRUQajK4sHD6CC2fK7ufBFJUR   Pool   675K / 0.000%



I did convert to 3Q

here I am:

3QkjD...WxpN2   Self   373M / 0.000%   133M / 0.000%   13.1M / 0.000%   554K / 0.000%   79.2K / 0.000%   45.56984

So this 3 number will pay off and is not an issue correct?

[loshia1974]

---------
I did convert to 3Q

here I am:

3QkjD...WxpN2   Self   373M / 0.000%   133M / 0.000%   13.1M / 0.000%   554K / 0.000%   79.2K / 0.000%   45.56984

So this 3 number will pay off and is not an issue correct?

Yes Absolutely
Pool Home Page: MutliSig addresses starting with 3 are properly supported.
Any way as you see even though people find blocks with M addresses i just process payouts manually and all is good. But however I DO PREFER everything to work without my interaction with L or 3 addresses
Best
Loshia
PS: thanks for Merit points! This is a second block i am paying out manually. First one was to a miner who misspelled his address with some added crap at the end.
Any way there are no worries. if someone makes mistake in the user name LTC block reward goes to pool address and is not lost. After Prove of owning mistaken address i am paying out manually. That is the way it should and must be.  

May i bring the mods attention again for 5th time already. Please restore my hacked account. I do think that the above should be enough to prove i was owning it. Or i can upload whatever is needed to pool web. Link to my hacked and locked profile:https://bitcointalk.org/index.php?action=profile;u=60875

[philipma1957]

---------
I did convert to 3Q

here I am:

3QkjD...WxpN2   Self   373M / 0.000%   133M / 0.000%   13.1M / 0.000%   554K / 0.000%   79.2K / 0.000%   45.56984

So this 3 number will pay off and is not an issue correct?

Yes Absolutely
Pool Home Page: MutliSig addresses starting with 3 are properly supported.
Any way as you see even though people find blocks with M addresses i just process payouts manually and all is good. But however I DO PREFER everything to work without my interaction with L or 3 addresses
Best
Loshia
PS: thanks for Merit points! This is a second block i am paying out manually. First one was to a miner who misspelled his address with some added crap at the end.
Any way there are no worries. if someone makes mistake in the user name LTC block reward goes to pool address and is not lost. After Prove of owning mistaken address i am paying out manually. That is the way it should and must be.  

May i bring the mods attention again for 5th time already. Please restore my hacked account. I do think that the above should be enough to prove i was owning it. Or i can upload whatever is needed to pool web. Link to my hacked and locked profile:https://bitcointalk.org/index.php?action=profile;u=60875

I will tag the hacked account for now.

I will trust you on the  new account for now.

[citronick]

---------
I did convert to 3Q

here I am:

3QkjD...WxpN2   Self   373M / 0.000%   133M / 0.000%   13.1M / 0.000%   554K / 0.000%   79.2K / 0.000%   45.56984

So this 3 number will pay off and is not an issue correct?

Yes Absolutely
Pool Home Page: MutliSig addresses starting with 3 are properly supported.
Any way as you see even though people find blocks with M addresses i just process payouts manually and all is good. But however I DO PREFER everything to work without my interaction with L or 3 addresses
Best
Loshia
PS: thanks for Merit points! This is a second block i am paying out manually. First one was to a miner who misspelled his address with some added crap at the end.
Any way there are no worries. if someone makes mistake in the user name LTC block reward goes to pool address and is not lost. After Prove of owning mistaken address i am paying out manually. That is the way it should and must be.  

May i bring the mods attention again for 5th time already. Please restore my hacked account. I do think that the above should be enough to prove i was owning it. Or i can upload whatever is needed to pool web. Link to my hacked and locked profile:https://bitcointalk.org/index.php?action=profile;u=60875

Inspired by Phil's post - sent you some merit points - to further validate your profile and hope the Admins will restore your previous account.

[loshia1974]

Phil, Citronick
Thank you very much for your support! Hopefully after a couple of years i may become Legendary again 
Best
Loshia

[philipma1957]

Phil, Citronick
Thank you very much for your support! Hopefully after a couple of years i may become Legendary again 
Best
Loshia

Maybe they will fix the issue

[loshia1974]

In reply to deleted post about DOGE address issues if poster is still interested

-----------------------

Here is something like how-to

https://bitcointalk.org/index.php?topic=1290219.msg20414675#msg20414675

If you are having difficulties doing it please prepare PC with Team viewer which can access your miner via ssh. I will do rest for you.
Loshia

[puntpasskick]

In reply to deleted post about DOGE address issues if poster is still interested

-----------------------

Here is something like how-to

https://bitcointalk.org/index.php?topic=1290219.msg20414675#msg20414675

If you are having difficulties doing it please prepare PC with Team viewer which can access your miner via ssh. I will do rest for you.
Loshia

Thanks Loshia. After I posted my question, I read your previous post about the topic and was able to fix the problem.  It was the first time I ever used SSH to get into a miner. I love the banner:


  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r38031)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------

[zacocity]

Hello Loshia

I have PM you - some problems with pool

[0mz]

In reply to deleted post about DOGE address issues if poster is still interested

-----------------------

Here is something like how-to

https://bitcointalk.org/index.php?topic=1290219.msg20414675#msg20414675

If you are having difficulties doing it please prepare PC with Team viewer which can access your miner via ssh. I will do rest for you.
Loshia

Just a note for clarity that you do need to make the change to all 3 instances or the miner will not operate properly.

[loshia1974]

Hello Loshia

I have PM you - some problems with pool

Hi,
I replied to your PM but i wanna post my reply here also to avoid future confusion of mining diff setup.

1. Your mining diff has ZERO  I repeat  ZERO  impact on your chances for finding a block. What is does it tells your miner which shares to send to the pool and has a little impact on your speed stats. So in all three cases you are good to go - diff around 27887  auto adjusted by the pool, Manually 65536 or with slush proxy - 8000000
It is up to you to decide
The important part is that your diff should be lower than DOGE network diff not to loose a doge block which equals to 2336512.132*65536 > 8000000 as we speak
Best
Loshia

[loshia1974]

In reply to deleted post about DOGE address issues if poster is still interested

-----------------------

Here is something like how-to

https://bitcointalk.org/index.php?topic=1290219.msg20414675#msg20414675

If you are having difficulties doing it please prepare PC with Team viewer which can access your miner via ssh. I will do rest for you.
Loshia

Just a note for clarity that you do need to make the change to all 3 instances or the miner will not operate properly.

Yes that is true all miners need to be changed. Otherwise you are risking to loose a DOGE if a particular "unchanged" miner finds a block.

[0mz]

In reply to deleted post about DOGE address issues if poster is still interested

-----------------------

Here is something like how-to

https://bitcointalk.org/index.php?topic=1290219.msg20414675#msg20414675

If you are having difficulties doing it please prepare PC with Team viewer which can access your miner via ssh. I will do rest for you.
Loshia

Just a note for clarity that you do need to make the change to all 3 instances or the miner will not operate properly.

Yes that is true all miners need to be changed. Otherwise you are risking to loose a DOGE if a particular "unchanged" miner finds a block.

I couldn't get it to mine at all when I tried to mix match configurations between the three.  Once I set them all to your updated syntax, no problems.

[loshia1974]

A miner reported issues with mail notifications. After checking i found out that mail exchanger was not working properly. I hope all is good now. Please do report if you are not getting notification mails.
Thanks
Loshia