ethminer-0.9.41-genoil-1.1

[LeChuckDE]

@carlo_0000

no comment ?

[induktor]

yes you have to rebuild with Cuda 8.0

Hi LeChuckDE

will do that then
thanks

[carlo_0000]

@carlo_0000

no comment ?

it s not possible with 1 gpu you have a multi gpu ring

[LeChuckDE]

@carlo_0000

no comment ?

it s not possible with 1 gpu you have a multi gpu ring

haven't at time more then 1 working gpu and this is a HD7850@20MH/s expanse

[induktor]

Hello
I received my firsts GTX 1070 and I can't make them work with ethminer

when i start the miner i get:

Code:

terminate called after throwing an instance of 'std::runtime_error'
what():  CUDA driver version is insufficient for CUDA runtime version

os is xubuntu 14.04 x64.
any idea what i am doing wrong? is CUDA 8 required to work with this driver?

yes you have to rebuild with Cuda 8.0

Hello
I am with cuda 8 now, but the error remains: CUDA driver version is insufficient for CUDA runtime version
I am using driver version 367.35 which is higher than the driver that cames with the CUDA 8 package!
should i install the driver (older) that cames with cuda 8 package instead?.
LD_LIBRARY_PATH points to cuda-8.0 and nvcc --version gives me cuda 8.
i don't know what else to try
[EDIT]
I tried to test it in OPENGL mode, but i get right after [OPENCL] using device: Geforce GTX 1070 (Opencl 1.2 CUDA)
00007f1fb1d60414 sp 00007f1f91fbde40 error 4 in libpthread-2.19.so[7f1fb1d56000+19000]

I compiled with -DCOMPUTE=61, will try without that.

[induktor]

I was able to make it work using OPENCL compiling without the -DCOMPUTE=61
these cards are beasts!!! ZOMG!, 2 cards are pushing 51MH in ETH at 100W each power limit, insane!, I don't like that they are running too hot because fans spins very slow!, I will dig how to control fans via smi interface, right now are at 30% with 55C temp.

in CUDA, still the same error: CUDA driver version is insufficient for CUDA runtime version  

[scryptr]

@carlo_0000

no comment ?

it s not possible with 1 gpu you have a multi gpu ring

haven't at time more then 1 working gpu and this is a HD7850@20MH/s expanse

PITCAIRN CARDS AND HASH RATES--

I am truly interested in in your personal Ethminer version 1.1.8.  I have 4 Pitcairn chip cards, R7 265, that I have pulled off my shelf and set to work mining ETH.  They get about 10MH/s each while mining ETH.  I expected the rate to be higher, but figured that it might be due to the larger DAG and greater network difficulty.  If your coding doubles the hash rate, or even increases the hash rate by 25-50%, it is a real achievement.

I hope that you publish a public sample soon, even if you delay the release of your code for a while.  I'd like to try a Linux binary when it is available.  I also have 6 Curacao chip cards, R7 370; Curacao is a chip derived from Pitcairn architecture.  I thought with lower temperatures and less wattage, they'd be good for mining.  Please release at least an "alpha" in binaries, you can delay any code release while research and development is going on.  To meet the license, eventually the code has to be available.       --scryptr

[Cryptozillah]

I have two 750Ti rigs just standing and collecting dust since months back.
Is it worth start mining ETC with them ?

Anyone know what hashrate i could expect at this point ?

THE 750ti HAS KNOWN PROBLEMS--

There are better coins to mine with a 750ti,, look at Decred, SiaCoin, or Library Credits.  None of the Dagger-Hashimoto coins has a DAG file small enough to be efficiently mined by a 2GB 750ti, it will mine at 4-5 MH/s.  If the DAG file were smaller, it would mine at about 8MH/s, as it performed early after the release of ETH.  The way memory is addressed by the 750ti is a problem.

If you want to mine ETH at 50% or less efficiency, you can.  You would have less than 10MH/s hashrate for the two cards combined, which barely registers at a pool.  But each card will maintain about 50MH/s on the "lbry" algo (LBC), and use very little energy, and produce a chunk of Library Coin every day.  It is possible to find a 4GB 750ti, but you are better off with a GTX 950 or 960. or an AMD R7 265 or HD 7850.  An AMD HD 7850/R7 265, considered to be in the same league as a 750ti, gets 10MH/s or better on ETH or ETC.       --scryptr

I know that the tide is pretty much by for the 750Ti:s and ETH.
I am trying to get them to mine anyway, i have ten cards in total.
I have tried several versions of the genoil miner but it just crashes when firing it up. "ethminer.exe have stopped working"

Anyone know what version that work with the old 750Ti these days ?

I have win8 in these old rigs at the moment.

[scryptr]

I have two 750Ti rigs just standing and collecting dust since months back.
Is it worth start mining ETC with them ?

Anyone know what hashrate i could expect at this point ?

THE 750ti HAS KNOWN PROBLEMS--

There are better coins to mine with a 750ti,, look at Decred, SiaCoin, or Library Credits.  None of the Dagger-Hashimoto coins has a DAG file small enough to be efficiently mined by a 2GB 750ti, it will mine at 4-5 MH/s.  If the DAG file were smaller, it would mine at about 8MH/s, as it performed early after the release of ETH.  The way memory is addressed by the 750ti is a problem.

If you want to mine ETH at 50% or less efficiency, you can.  You would have less than 10MH/s hashrate for the two cards combined, which barely registers at a pool.  But each card will maintain about 50MH/s on the "lbry" algo (LBC), and use very little energy, and produce a chunk of Library Coin every day.  It is possible to find a 4GB 750ti, but you are better off with a GTX 950 or 960. or an AMD R7 265 or HD 7850.  An AMD HD 7850/R7 265, considered to be in the same league as a 750ti, gets 10MH/s or better on ETH or ETC.       --scryptr

I know that the tide is pretty much by for the 750Ti:s and ETH.
I am trying to get them to mine anyway, i have ten cards in total.
I have tried several versions of the genoil miner but it just crashes when firing it up. "ethminer.exe have stopped working"

Anyone know what version that work with the old 750Ti these days ?

I have win8 in these old rigs at the moment.

TRY SETTING IT UP FOR EXPANSE--

Somebody said Expanse is still possible with a 750ti.  The DAG may still be small enough and the network difficulty low enough.  I haven't tried it, though.

With 10 750ti cards you could make good profit with Library Credits (LBC), Decred (DCR), or SiaCoin (SC).  Epsylon3's CCminer v1.8 will soon support the algo for SiaCoin, and already is the best CUDA-miner for LBC and DCR..  GOminer likely works with 750ti cards already, but I am mining LBC with them, and earn several LBC a day.  It just works, and it is already there.  No struggle for these coins.  My bigger cards mine ETH, and the old AMD cards finally ROI'd.       --scryptr

[Cryptozillah]

I have two 750Ti rigs just standing and collecting dust since months back.
Is it worth start mining ETC with them ?

Anyone know what hashrate i could expect at this point ?

THE 750ti HAS KNOWN PROBLEMS--

There are better coins to mine with a 750ti,, look at Decred, SiaCoin, or Library Credits.  None of the Dagger-Hashimoto coins has a DAG file small enough to be efficiently mined by a 2GB 750ti, it will mine at 4-5 MH/s.  If the DAG file were smaller, it would mine at about 8MH/s, as it performed early after the release of ETH.  The way memory is addressed by the 750ti is a problem.

If you want to mine ETH at 50% or less efficiency, you can.  You would have less than 10MH/s hashrate for the two cards combined, which barely registers at a pool.  But each card will maintain about 50MH/s on the "lbry" algo (LBC), and use very little energy, and produce a chunk of Library Coin every day.  It is possible to find a 4GB 750ti, but you are better off with a GTX 950 or 960. or an AMD R7 265 or HD 7850.  An AMD HD 7850/R7 265, considered to be in the same league as a 750ti, gets 10MH/s or better on ETH or ETC.       --scryptr

I know that the tide is pretty much by for the 750Ti:s and ETH.
I am trying to get them to mine anyway, i have ten cards in total.
I have tried several versions of the genoil miner but it just crashes when firing it up. "ethminer.exe have stopped working"

Anyone know what version that work with the old 750Ti these days ?

I have win8 in these old rigs at the moment.

TRY SETTING IT UP FOR EXPANSE--

Somebody said Expanse is still possible with a 750ti.  The DAG may still be small enough and the network difficulty low enough.  I haven't tried it, though.

With 10 750ti cards you could make good profit with Library Credits (LBC), Decred (DCR), or SiaCoin (SC).  Epsylon3's CCminer v1.8 will soon support the algo for SiaCoin, and already is the best CUDA-miner for LBC and DCR..  GOminer likely works with 750ti cards already, but I am mining LBC with them, and earn several LBC a day.  It just works, and it is already there.  No struggle for these coins.  My bigger cards mine ETH, and the old AMD cards finally ROI'd.       --scryptr

Ok. Thanks for the suggestions. I did put my 750Ti rigs on Decred for now.
I have been away from mining for 5-6 months so i feel a bit lost.

I am getting six RX 480 8GB cards delivered tomorrow and will get them up mining ETC.
I also have a GTX 1070 in my gaming rig that i will try to get up and running on ETC.

[carlo_0000]

i ve tried to test expense too, as my 380's are unstable on etc & eth

but miner crash at start when it try on pool exp.suprnova.cc


but i don't understand why some miners crash on etc and others working fine

all 380 2 gigas gpu's

asus ring 5 gpu they working fine, + 1 solo xfx working fine too

but my xfx 6 gpu ring just get crazy at start or after few minutes on etc and some more on eth before it get errors
and the 5x sapphire can few minutes or couple of hours before get same errors

  so weird

[Ultrabat]

i ve tried to test expense too, as my 380's are unstable on etc & eth

but miner crash at start when it try on pool exp.suprnova.cc


but i don't understand why some miners crash on etc and others working fine

all 380 2 gigas gpu's

asus ring 5 gpu they working fine, + 1 solo xfx working fine too

but my xfx 6 gpu ring just get crazy at start or after few minutes on etc and some more on eth before it get errors
and the 5x sapphire can few minutes or couple of hours before get same errors

  so weird

You just need to reduce the voltage or the frequency of your graphics cards. They might be too hot.

[ocminer]

i ve tried to test expense too, as my 380's are unstable on etc & eth

but miner crash at start when it try on pool exp.suprnova.cc


but i don't understand why some miners crash on etc and others working fine

all 380 2 gigas gpu's

asus ring 5 gpu they working fine, + 1 solo xfx working fine too

but my xfx 6 gpu ring just get crazy at start or after few minutes on etc and some more on eth before it get errors
and the 5x sapphire can few minutes or couple of hours before get same errors

  so weird

Can you post me the message how it is crashing ? Maybe it is using the wrong Stratum Variant ?

If you are using any other Version than genoil 1.1.0 you have to use "-SP 2" in the cmdline like so:

ethminer.exe -G -SP 2 -S exp.suprnova.cc:3333 -O myworker.1:x

[revelacaogr]

i ve tried to test expense too, as my 380's are unstable on etc & eth

but miner crash at start when it try on pool exp.suprnova.cc


but i don't understand why some miners crash on etc and others working fine

all 380 2 gigas gpu's

asus ring 5 gpu they working fine, + 1 solo xfx working fine too

but my xfx 6 gpu ring just get crazy at start or after few minutes on etc and some more on eth before it get errors
and the 5x sapphire can few minutes or couple of hours before get same errors

  so weird

Can you post me the message how it is crashing ? Maybe it is using the wrong Stratum Variant ?

If you are using any other Version than genoil 1.1.0 you have to use "-SP 2" in the cmdline like so:

ethminer.exe -G -SP 2 -S exp.suprnova.cc:3333 -O myworker.1:x

@ocminer

witch is the best mining motherboard? i wont yr opinion...
thanks in advance...
still is ashrock h?

[giagge]

I have a question .

AMD rx480 work for ethereum classic ( etc ) on windows 10 x64 home edition redstone ?

Thanks .

[ocminer]

i ve tried to test expense too, as my 380's are unstable on etc & eth

but miner crash at start when it try on pool exp.suprnova.cc


but i don't understand why some miners crash on etc and others working fine

all 380 2 gigas gpu's

asus ring 5 gpu they working fine, + 1 solo xfx working fine too

but my xfx 6 gpu ring just get crazy at start or after few minutes on etc and some more on eth before it get errors
and the 5x sapphire can few minutes or couple of hours before get same errors

  so weird

Can you post me the message how it is crashing ? Maybe it is using the wrong Stratum Variant ?

If you are using any other Version than genoil 1.1.0 you have to use "-SP 2" in the cmdline like so:

ethminer.exe -G -SP 2 -S exp.suprnova.cc:3333 -O myworker.1:x

@ocminer

witch is the best mining motherboard? i wont yr opinion...
thanks in advance...
still is ashrock h?

Z170 is in my Rigs, and H81 pro BTC is still one of the best

[induktor]

Question.
has anyone any idea how to increase fan speed in the new GTX 1070 ?, i tried via nvidia-settings but it says: property is read only

I also couldn't find any way to do it with nvidia-smi interface

the card is unnecesarily hot, fans are at 20% and the card backplane is like 70 degrees insane!. (gigabyte G1)

so far i couldn't find any way to do that.

i can bug the card with an external PWM controller but i prefer to leave it original if possible so... if there is a software solution (on linux) would be awesome.

[thesmokingman]

Question.
has anyone any idea how to increase fan speed in the new GTX 1070 ?, i tried via nvidia-settings but it says: property is read only

I also couldn't find any way to do it with nvidia-smi interface

the card is unnecesarily hot, fans are at 20% and the card backplane is like 70 degrees insane!. (gigabyte G1)

so far i couldn't find any way to do that.

i can bug the card with an external PWM controller but i prefer to leave it original if possible so... if there is a software solution (on linux) would be awesome.

You have to create an xorg.conf file in the X11 folder and add the coolbits option. I have my Gigabyte G1 gaming cards setup as Coolbits 31 and it allows me to modify the fan and core/mem clocks. However, my G1s run in the 63-65C mark constant, so I don't mess with the fans....

Here's a really rough guide I used to get mine working...PM me if you need help as I'm new in Linux and it took me 3 days to fill in the gaps...

https://forum.ethereum.org/discussion/7780/gtx1070-linux-installation-and-mining-clue-goodbye-amd-welcome-nvidia-for-miners

[carlo_0000]

i ve tried to test expense too, as my 380's are unstable on etc & eth

but miner crash at start when it try on pool exp.suprnova.cc


but i don't understand why some miners crash on etc and others working fine

all 380 2 gigas gpu's

asus ring 5 gpu they working fine, + 1 solo xfx working fine too

but my xfx 6 gpu ring just get crazy at start or after few minutes on etc and some more on eth before it get errors
and the 5x sapphire can few minutes or couple of hours before get same errors

  so weird

Can you post me the message how it is crashing ? Maybe it is using the wrong Stratum Variant ?

If you are using any other Version than genoil 1.1.0 you have to use "-SP 2" in the cmdline like so:

ethminer.exe -G -SP 2 -S exp.suprnova.cc:3333 -O myworker.1:x

hi, -SP 2  don't work i ve tested that too

"C:\cgminer skein\cgminer_skein\ethminer-opencl-0.9.41\ethminer.exe" -G -S exp.suprnova.cc:3333 -O carlo_0000.380xfx:0

Code:

Signature du problème :
  Nom d’événement de problème:	APPCRASH
  Nom de l’application:	ethminer.exe
  Version de l’application:	0.0.0.0
  Horodatage de l’application:	574ea6a2
  Nom du module par défaut:	MSVCR120.dll
  Version du module par défaut:	12.0.21005.1
  Horodateur du module par défaut:	524f83ff
  Code de l’exception:	40000015
  Décalage de l’exception:	0000000000074a46
  Version du système:	6.1.7601.2.1.0.256.48
  Identificateur de paramètres régionaux:	2060
  Information supplémentaire n° 1:	c7c7
  Information supplémentaire n° 2:	c7c7c53ab42ba3bc07ede86d44d3ebf0
  Information supplémentaire n° 3:	0417
  Information supplémentaire n° 4:	041776d4c0a35fee3c9d56597f80ccb5

Lire notre déclaration de confidentialité en ligne :
  http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x040c

Si la déclaration de confidentialité en ligne n’est pas disponible, lisez la version hors connexion :
  C:\Windows\system32\fr-FR\erofflps.txt

[ocminer]

i ve tried to test expense too, as my 380's are unstable on etc & eth

but miner crash at start when it try on pool exp.suprnova.cc


but i don't understand why some miners crash on etc and others working fine

all 380 2 gigas gpu's

asus ring 5 gpu they working fine, + 1 solo xfx working fine too

but my xfx 6 gpu ring just get crazy at start or after few minutes on etc and some more on eth before it get errors
and the 5x sapphire can few minutes or couple of hours before get same errors

  so weird

Can you post me the message how it is crashing ? Maybe it is using the wrong Stratum Variant ?

If you are using any other Version than genoil 1.1.0 you have to use "-SP 2" in the cmdline like so:

ethminer.exe -G -SP 2 -S exp.suprnova.cc:3333 -O myworker.1:x

hi, -SP 2  don't work i ve tested that too

"C:\cgminer skein\cgminer_skein\ethminer-opencl-0.9.41\ethminer.exe" -G -S exp.suprnova.cc:3333 -O carlo_0000.380xfx:0

Code:

Signature du problème :
  Nom d’événement de problème:	APPCRASH
  Nom de l’application:	ethminer.exe
  Version de l’application:	0.0.0.0
  Horodatage de l’application:	574ea6a2
  Nom du module par défaut:	MSVCR120.dll
  Version du module par défaut:	12.0.21005.1
  Horodateur du module par défaut:	524f83ff
  Code de l’exception:	40000015
  Décalage de l’exception:	0000000000074a46
  Version du système:	6.1.7601.2.1.0.256.48
  Identificateur de paramètres régionaux:	2060
  Information supplémentaire n° 1:	c7c7
  Information supplémentaire n° 2:	c7c7c53ab42ba3bc07ede86d44d3ebf0
  Information supplémentaire n° 3:	0417
  Information supplémentaire n° 4:	041776d4c0a35fee3c9d56597f80ccb5

Lire notre déclaration de confidentialité en ligne :
  http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x040c

Si la déclaration de confidentialité en ligne n’est pas disponible, lisez la version hors connexion :
  C:\Windows\system32\fr-FR\erofflps.txt

You are using an old version, try to use this version :

https://github.com/nicehash/cpp-ethereum/releases