ethminer-0.9.41-genoil-1.1

[manotroll]

hello I need help
the mining ETH
I received a disconnect message
SS as shown below


But the mine ETC does not happen
how can I solve this?

[Foss]

Hi Genoil

Post by: Genoil on 02 July 2016
Forgot to implement  a +2% speed increase (7950) that @Wolf0 hinted me at a while back. Will likely make it to 1.1.8

when it will be?

[manotroll]

Hi Genoil

Post by: Genoil on 02 July 2016
Forgot to implement  a +2% speed increase (7950) that @Wolf0 hinted me at a while back. Will likely make it to 1.1.8

when it will be?

1.1.8 ?

You can pass the link where you downloaded?

[scryptr]

Hi Genoil

Post by: Genoil on 02 July 2016
Forgot to implement  a +2% speed increase (7950) that @Wolf0 hinted me at a while back. Will likely make it to 1.1.8

when it will be?

1.1.8 ?

You can pass the link where you downloaded?

THE LAST WORD FROM GENOIL--

The next planned release was v2.0, and that it would be "end of August".  The last published version was v1.1.7, available on GitHub.

Genoil has posted within the last week on another thread, but has not been so active.       --scryptr

[manotroll]

Hi Genoil

Post by: Genoil on 02 July 2016
Forgot to implement  a +2% speed increase (7950) that @Wolf0 hinted me at a while back. Will likely make it to 1.1.8

when it will be?

1.1.8 ?

You can pass the link where you downloaded?

THE LAST WORD FROM GENOIL--

The next planned release was v2.0, and that it would be "end of August".  The last published version was v1.1.7, available on GitHub.

Genoil has posted within the last week on another thread, but has not been so active.       --scryptr

I have just ethminer-0.9.41-genoil-1.1.6-pre

could provide me the 1.1.7?

[Foss]

Hi Genoil

Post by: Genoil on 02 July 2016
Forgot to implement  a +2% speed increase (7950) that @Wolf0 hinted me at a while back. Will likely make it to 1.1.8

when it will be?

1.1.8 ?

You can pass the link where you downloaded?

THE LAST WORD FROM GENOIL--

The next planned release was v2.0, and that it would be "end of August".  The last published version was v1.1.7, available on GitHub.

Genoil has posted within the last week on another thread, but has not been so active.       --scryptr

I have just ethminer-0.9.41-genoil-1.1.6-pre

could provide me the 1.1.7?

  https://github.com/Genoil/cpp-ethereum/tree/110/releases

[manotroll]

 
thx

[nowal83]

Hello
can u help me.
Tech: Genoil 1.1.7, Win 8.1 x64, Crimson 15.12., 5x r9 390
start.bat :

Code:

set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_HEAP_SIZE=100
set GPU_SINGLE_ALLOC_PERCENT=100
C:\genoil\ethminer --farm-recheck 200 --cl-local-work 256 --cl-global-work 16384 -G -F eth-eu.dwarfpool.com:8008 -SP 1 -SC 1 -O mywallet.farm1

Command line answer:

Code:

C:\Users\Farm1>C:\genoil\ethminer --farm-recheck 200 --cl-local-work 256 --cl-global-work 16384 -G -F eth-eu.dwarfpool.com:8008 -SP 1 -SC 1 -O mywallet.farm1
Genoil's ethminer 0.9.41-genoil-1.1.7
=====================================================================
Forked from github.com/ethereum/cpp-ethereum
CUDA kernel ported from Tim Hughes' OpenCL kernel
With contributions from nicehash, nerdralph, RoBiK and sp_


Please consider a donation to:
ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d


No GPU device with sufficient memory was found. Can't GPU mine. Remove the -G argument

Where is error?

[scryptr]

Hello
can u help me.
Tech: Genoil 1.1.7, Win 8.1 x64, Crimson 15.12., 5x r9 390
start.bat :

Code:

set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_HEAP_SIZE=100
set GPU_SINGLE_ALLOC_PERCENT=100
C:\genoil\ethminer --farm-recheck 200 --cl-local-work 256 --cl-global-work 16384 -G -F eth-eu.dwarfpool.com:8008 -SP 1 -SC 1 -O mywallet.farm1

Command line answer:

Code:

C:\Users\Farm1>C:\genoil\ethminer --farm-recheck 200 --cl-local-work 256 --cl-global-work 16384 -G -F eth-eu.dwarfpool.com:8008 -SP 1 -SC 1 -O mywallet.farm1
Genoil's ethminer 0.9.41-genoil-1.1.7
=====================================================================
Forked from github.com/ethereum/cpp-ethereum
CUDA kernel ported from Tim Hughes' OpenCL kernel
With contributions from nicehash, nerdralph, RoBiK and sp_


Please consider a donation to:
ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d


No GPU device with sufficient memory was found. Can't GPU mine. Remove the -G argument

Where is error?

THE COMMAND IN WINDOWS IS "SETX"--

The environment variables in Windows are set with "setx GPU_USE_SYNC_OBJECTS 1".  There is no equals sign "=" in the Windows syntax.  The equals sign is used in Linux, and "EXPORT" is used in Linux rather than "setx".  The user has to provide the correct syntax for his operating system.       --scryptr

[nowal83]

THE COMMAND IN WINDOWS IS "SETX"--

The environment variables in Windows are set with "setx GPU_USE_SYNC_OBJECTS 1".  There is no equals sign "=" in the Windows syntax.  The equals sign is used in Linux, and "EXPORT" is used in Linux rather than "setx".  The user has to provide the correct syntax for his operating system.       --scryptr

Thanx for reply, edit to SETX, but the same problem.

[induktor]

THE COMMAND IN WINDOWS IS "SETX"--

The environment variables in Windows are set with "setx GPU_USE_SYNC_OBJECTS 1".  There is no equals sign "=" in the Windows syntax.  The equals sign is used in Linux, and "EXPORT" is used in Linux rather than "setx".  The user has to provide the correct syntax for his operating system.       --scryptr

Thanx for reply, edit to SETX, but the same problem.

How much ram do you have?, for 5 of those cards i will use AT LEAST 12GB, and use a 24GB paging file in windows.
try removing all the absolutely not necessary options (--farm-recheck 200 --cl-local-work 256 --cl-global-work 16384 -SP1 ? -SC 1?), start with the minimum necessary and build from there.

are you sure all the cards are detected properly?, can you see them all active in the MSI Afterburner?

I only use:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

and add a:
timeout 120

before starting the miner, because i have a slow hard drive in that miner, so i need to give it time to load.....whatever it loads   or it will fuck the miner up.

[nowal83]

How much ram do you have?, for 5 of those cards i will use AT LEAST 12GB, and use a 24GB paging file in windows.
try removing all the absolutely not necessary options (--farm-recheck 200 --cl-local-work 256 --cl-global-work 16384 -SP1 ? -SC 1?), start with the minimum necessary and build from there.

are you sure all the cards are detected properly?, can you see them all active in the MSI Afterburner?

I only use:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

and add a:
timeout 120

before starting the miner, because i have a slow hard drive in that miner, so i need to give it time to load.....whatever it loads   or it will fuck the miner up.

I have 8GB RAM and 24GB paging file in windows.
remove all options. now i start config:

Code:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
timeout 120
C:\genoil\ethminer -G -F eth-eu.dwarfpool.com:8008 -O wallet.farm1

Same error. Need something else. It may be necessary to install some special software?

[manotroll]

Hello
can u help me.
Tech: Genoil 1.1.7, Win 8.1 x64, Crimson 15.12., 5x r9 390
start.bat :

Code:

set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_HEAP_SIZE=100
set GPU_SINGLE_ALLOC_PERCENT=100
C:\genoil\ethminer --farm-recheck 200 --cl-local-work 256 --cl-global-work 16384 -G -F eth-eu.dwarfpool.com:8008 -SP 1 -SC 1 -O mywallet.farm1

Command line answer:

Code:

C:\Users\Farm1>C:\genoil\ethminer --farm-recheck 200 --cl-local-work 256 --cl-global-work 16384 -G -F eth-eu.dwarfpool.com:8008 -SP 1 -SC 1 -O mywallet.farm1
Genoil's ethminer 0.9.41-genoil-1.1.7
=====================================================================
Forked from github.com/ethereum/cpp-ethereum
CUDA kernel ported from Tim Hughes' OpenCL kernel
With contributions from nicehash, nerdralph, RoBiK and sp_


Please consider a donation to:
ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d


No GPU device with sufficient memory was found. Can't GPU mine. Remove the -G argument

Where is error?

use driver 16.9.1 or old

[Genoil]

In some cases adding --opencl-platform 1 helps

[scryptr]

In some cases adding --opencl-platform 1 helps

GENOIL, NICE TO SEE YOU POST--

Will there still be a release of CUDA EthMiner v2.0?  You have been long absent!  Welcome back!!!       --scryptr

[adamvp]

Hello
can u help me.
Tech: Genoil 1.1.7, Win 8.1 x64, Crimson 15.12., 5x r9 390
start.bat :

Code:

set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_HEAP_SIZE=100
set GPU_SINGLE_ALLOC_PERCENT=100
C:\genoil\ethminer --farm-recheck 200 --cl-local-work 256 --cl-global-work 16384 -G -F eth-eu.dwarfpool.com:8008 -SP 1 -SC 1 -O mywallet.farm1

Command line answer:

Code:

C:\Users\Farm1>C:\genoil\ethminer --farm-recheck 200 --cl-local-work 256 --cl-global-work 16384 -G -F eth-eu.dwarfpool.com:8008 -SP 1 -SC 1 -O mywallet.farm1
Genoil's ethminer 0.9.41-genoil-1.1.7
=====================================================================
Forked from github.com/ethereum/cpp-ethereum
CUDA kernel ported from Tim Hughes' OpenCL kernel
With contributions from nicehash, nerdralph, RoBiK and sp_


Please consider a donation to:
ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d


No GPU device with sufficient memory was found. Can't GPU mine. Remove the -G argument

Where is error?

use driver 16.9.1 or old

please enter

Code:

ethminer --list-devices -G

and paste its output here

[nowal83]

In some cases adding --opencl-platform 1 helps

Thank you for help!

[manotroll]

Hello
can u help me.
Tech: Genoil 1.1.7, Win 8.1 x64, Crimson 15.12., 5x r9 390
start.bat :

Code:

set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_HEAP_SIZE=100
set GPU_SINGLE_ALLOC_PERCENT=100
C:\genoil\ethminer --farm-recheck 200 --cl-local-work 256 --cl-global-work 16384 -G -F eth-eu.dwarfpool.com:8008 -SP 1 -SC 1 -O mywallet.farm1

Command line answer:

Code:

C:\Users\Farm1>C:\genoil\ethminer --farm-recheck 200 --cl-local-work 256 --cl-global-work 16384 -G -F eth-eu.dwarfpool.com:8008 -SP 1 -SC 1 -O mywallet.farm1
Genoil's ethminer 0.9.41-genoil-1.1.7
=====================================================================
Forked from github.com/ethereum/cpp-ethereum
CUDA kernel ported from Tim Hughes' OpenCL kernel
With contributions from nicehash, nerdralph, RoBiK and sp_


Please consider a donation to:
ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d


No GPU device with sufficient memory was found. Can't GPU mine. Remove the -G argument

Where is error?

use driver 16.9.1 or old

please enter

Code:

ethminer --list-devices -G

and paste its output here

Listing OpenCL devices.
FORMAT: [deviceID] deviceName

• Hawaii

        CL_DEVICE_TYPE: GPU
        CL_DEVICE_GLOBAL_MEM_SIZE: 8589934592
        CL_DEVICE_MAX_MEM_ALLOC_SIZE: 4244635648
        CL_DEVICE_MAX_WORK_GROUP_SIZE: 256

should not put 8gb instead of 4GB?

of commands is available in general for this program?

[kenshirothefist]

Hi,

I would like to get some information regarding ethminer performance on NVIDIA on Windows10.

We know there are issues with mining on Windows 10, so I'd like to know you experience (assuming you're using LATEST drivers and LATEST ethminer version)

1. What is your speed for either GTX 960/970/980 (any Maxwell 5.2 essentially) on Windows 7? Is it the same as on Windows 10?

2. And the same for Pascal - what is your speed for either GTX 1060/1070/1080 (any Pascal 6.1 essentially) on Windows 7? Is it the same as on Windows 10?

Thanks!

[adamvp]

Hello
can u help me.
Tech: Genoil 1.1.7, Win 8.1 x64, Crimson 15.12., 5x r9 390
start.bat :

Code:

set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_HEAP_SIZE=100
set GPU_SINGLE_ALLOC_PERCENT=100
C:\genoil\ethminer --farm-recheck 200 --cl-local-work 256 --cl-global-work 16384 -G -F eth-eu.dwarfpool.com:8008 -SP 1 -SC 1 -O mywallet.farm1

Command line answer:

Code:

C:\Users\Farm1>C:\genoil\ethminer --farm-recheck 200 --cl-local-work 256 --cl-global-work 16384 -G -F eth-eu.dwarfpool.com:8008 -SP 1 -SC 1 -O mywallet.farm1
Genoil's ethminer 0.9.41-genoil-1.1.7
=====================================================================
Forked from github.com/ethereum/cpp-ethereum
CUDA kernel ported from Tim Hughes' OpenCL kernel
With contributions from nicehash, nerdralph, RoBiK and sp_


Please consider a donation to:
ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d


No GPU device with sufficient memory was found. Can't GPU mine. Remove the -G argument

Where is error?

use driver 16.9.1 or old

please enter

Code:

ethminer --list-devices -G

and paste its output here

Listing OpenCL devices.
FORMAT: [deviceID] deviceName

• Hawaii

        CL_DEVICE_TYPE: GPU
        CL_DEVICE_GLOBAL_MEM_SIZE: 8589934592
        CL_DEVICE_MAX_MEM_ALLOC_SIZE: 4244635648
        CL_DEVICE_MAX_WORK_GROUP_SIZE: 256

should not put 8gb instead of 4GB?

of commands is available in general for this program?

It seems that you have to set mem_alloc_size for 100%
List of the commans are at ethminer --help