Bitcoin Forum
January 22, 2019, 07:33:16 AM *
News: Latest Bitcoin Core release: 0.17.1 [Torrent]
 
   Home   Help Search Login Register More  
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [23] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 »
  Print  
Author Topic: いい antrun.de - Antrouter R1 Fun-Run - compare your share いい  (Read 96961 times)
minibit
Sr. Member
****
Offline Offline

Activity: 280
Merit: 250



View Profile
May 05, 2016, 05:20:45 PM

Hi ammi,

is it possible, to expand the antrun.de MHz-Range to 500MHz?

I got my first successfully working tests @475MHz / 462.5MHz Smiley.
Its now possible with a special selfmade Peltier-Cooling solution Wink)

Thx,
andY



Can you post a picture of your R1? Cooling with Peltier sounds nice!

@Rich: Your second R1 is very lonely at the bottom of the list!  Embarrassed Smiley
PLAY NOW
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1548142396
Hero Member
*
Offline Offline

Posts: 1548142396

View Profile Personal Message (Offline)

Ignore
1548142396
Reply with quote  #2

1548142396
Report to moderator
RichBC
Hero Member
*****
Offline Offline

Activity: 574
Merit: 500



View Profile
May 05, 2016, 05:53:45 PM


@Rich: Your second R1 is very lonely at the bottom of the list!  Embarrassed Smiley

Unfortunately it is dead.... and should, be put to rest. It is now just being used to control one of my gekko Miners, so not all is lost.  Smiley


Rich


→→→→→→→→→→→→→→→→→→ 💰 Hard-Disk Mineable Cryptocurrency !! B U R S T C O I N 💰 Cheap Price & Easy to Invest - CHECK IT OUT NOW! !! →→→→→→→→→→→→→→→→→→ 💰 Asset exchange, Automatic transactions, Escrow system & More !!
andymanone
Sr. Member
****
Offline Offline

Activity: 432
Merit: 250


Save the past & use the future


View Profile
May 05, 2016, 06:19:35 PM

Hi ammi,

is it possible, to expand the antrun.de MHz-Range to 500MHz?

I got my first successfully working tests @475MHz / 462.5MHz Smiley.
Its now possible with a special selfmade Peltier-Cooling solution Wink)

Thx,
andY



Nice Frequencies. I am playing with my gekko at the moment, have done brief tests at 400MHz, but a few HW errors so need to do a mod to up the voltage as have run out of range on the pot.

Good Luck...


Rich
Ahh great Smiley!
@Gekko VCore : I guess the value for the pulldown resistor to Ground is too high....?
For my R1 I used a 10k to ground from the pot, so its possible a max Vcore of nearly 1V.

@Nice frequencies: yes, I think its not bad for the beginning Wink
But the major issue seems to be the ckpool, so very often I got stops there between 10 to 30 minutes  Huh


@Minibit:
Hi ammi,

is it possible, to expand the antrun.de MHz-Range to 500MHz?

I got my first successfully working tests @475MHz / 462.5MHz Smiley.
Its now possible with a special selfmade Peltier-Cooling solution Wink)

Thx,
andY



Can you post a picture of your R1? Cooling with Peltier sounds nice!


Yes, no prob, Ill upload it asap Smiley.
But dont be disappointed,  its a first "quickndirty" solution for testing  Wink

And unfortunately, as still a newbie status member here,  Its forbidden to post embedded pictures, only picture links are possible  Sad

andY

#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehacks coming soon Bitfury Asic Miners!
Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore)

My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
Real-Duke
Legendary
*
Offline Offline

Activity: 1442
Merit: 1027



View Profile
May 05, 2016, 07:21:33 PM

@Rich: Your second R1 is very lonely at the bottom of the list!  Embarrassed Smiley
My R1 is with him to hold his hand on Position 24  Undecided Undecided

▄▄▄████████▄▄▄
▄▄██████████████████▄▄
▄████████████████████████▄
▄██████████████████████▀  ███▄
████████████▀▀    ▀▀███▀  ▄█████
██████████▀         ██▀  ▄████████
█████████▀      ▄▄▄▄██▀  ▄██████████
████████     ▄██████▀  ▄██  ████████
████████     ███████▀  ▄██    ████████
████████    ██████▀  ▄████    ████████
████████    █████▀  ▄█████    ████████
████████    ███▀  ▄██████     ████████
████████  ███▀  ▄█████▀     ████████
███████████▀  ▄█▀▀▀▀      ▄█████████
█████████▀  ▄█         ▄██████████
██████▀  ▄██▄▄    ▄▄████████████
▀████  ▄█████████████████████▀
▀████████████████████████▀
▀▀██████████████████▀▀
▀▀▀████████▀▀▀




██████            ██████          ▄▄██████          ▄▄███████▄▄                ▄▄███████▄▄
 ██████          ██████        ▄██████████       ▄███████████████▄          ▄███████████████▄
 ▀█████▄        ▄█████▀       ████████████      ███████████████████        ███████████████████
  ▀█████▄      ▄█████▀       ████████▀▀        ███████▀▀    ▀▀██████      ██████▀▀     ▀▀██████
   ██████      ██████       ███████           ██████▀       ▄██████      █████▀           ▀█████
   ▀█████▄    ▄█████▀      ███████           ██████       ▄██████▀      █████               █████
    ▀█████▄  ▄█████▀       ██████            █████      ▄██████▀        █████               █████
     ██████  ██████        ██████            █████    ▄██████▀          █████               █████
     ▀█████▄▄█████▀        ██████            █████▄ ▄██████▀            █████               █████
      ▀██████████▀         ██████             ███████████▀     ▄███▄     █████▄           ▄█████
       ██████████          ██████              ████████▀    ▄▄██████      ██████▄▄     ▄▄██████
       ▀████████▀          ██████               ███████████████████        ███████████████████
        ▀██████▀           ██████                ▀███████████████▀          ▀███████████████▀
         ▀████▀            ██████                   ▀▀███████▀▀                ▀▀███████▀▀




[
 ▄███████████████████████▄
██▀                     ▀██
██  ▄█████████████████▄  ██
██  ███             ███  ██
██  ███             ███  ██
██  ███             ███  ██
██  ███             ███  ██
██  ███             ███  ██
██  ▀████████████████▀   ██
██                       ██
██                  ▄▄▄  ██
██   ██             ███  ██
██ ██████       ▄▄▄      ██
██   ██         ███    ▄ ██
██        ▄  ▄       ▄▀ ▄██
██      ▄▀ ▄▀      ▄▀ ▄██▀
██▄               ▀ ▄██▀
 ▀███████████████████▀
Telegram
ANN Thread
Website
]
andymanone
Sr. Member
****
Offline Offline

Activity: 432
Merit: 250


Save the past & use the future


View Profile
May 05, 2016, 08:01:24 PM
Last edit: May 12, 2016, 03:28:16 PM by andymanone

So,
like promised,
here some infos and a couple of first pics from my Peltier-cooled R1 Mod... Smiley

(Sorry, links only, but I hope, I get the Full member status asap, so Im able to insert the pics directly)

What Ive done with the R1 before:

1. disabled the internal power supply and using a Powerbrick with 5 Volt/10 Amp as supply
2. first trying to use heatsinks on both sides of BM1384, but decided finally to reuse the original case, because its in my eyes a good solution for heat dissipation
3. using twice new cooling pads on each sides of internal BM1384 for more pressure and better cooling conditions!
4. Vcore Mod with pot for variable VCore between 0.6 up to 1V
5. adding a Vcore voltmeter
6. add an Sharkoon HPS1
7. add an Peltier solution

But here finally some pics  Wink:

1. Sharkoon HPS1 Cooler stuffed with a 40x40 Peltier



2. Sharkoon HPS1 Cooler with Peltier saddled up on the R1 Mod



3. First try - in front the Peltier-Controller Board



4. First working Temp Measure: note(!) In=Ambient Temp 25.1C , and OUT=Minertemp! = 24,9C  Cool



5. First test @300MHz / Vcore 0.724 Volt



6. Second test @475MHz / Vcore 0.891 Volt working Temp Measure: In=Ambient Temp 24.7C (opened Window Wink) and OUT = Minertemp=41,1C



7. Third test @475MHz / screwed up Vcore to 0.900 Volt



8. Closer look @R1 running on 475Mhz



9. Screenshot of my Power Measuring Software - Consumption between 25 and 27 Watts @475MHz



Update: added a Test-Screenshot after 26min of running my R1 @25-27GHs (06.05.2016)
10. R1@475MHz Average 25-27GHs




Thats it for now Smiley
If any questions, feel free to ask me.

andY


#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehacks coming soon Bitfury Asic Miners!
Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore)

My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
minibit
Sr. Member
****
Offline Offline

Activity: 280
Merit: 250



View Profile
May 05, 2016, 10:52:11 PM

So,
like promised,
here some infos and a couple of first pics from my Peltier-cooled R1 Mod... Smiley

(Sorry, links only, but I hope, I get the Full member status asap, so Im able to insert the pics directly)

What Ive done with the R1 before:

1. disabled the internal power supply and using a Powerbrick with 5 Volt/10 Amp as supply
2. first trying to use heatsinks on both sides of BM1384, but decided finally to reuse the original case, because its in my eyes a good solution for heat dissipation
3. using twice new cooling pads on each sides of internal BM1384 for more pressure and better cooling conditions!
4. Vcore Mod with pot for variable VCore between 0.6 up to 1V
5. adding a Vcore voltmeter
6. add an Sharkoon HPS1
7. add an Peltier solution

But here finally some pics  Wink:

1. Sharkoon HPS1 Cooler stuffed with a 40x40 Peltier

2. Sharkoon HPS1 Cooler with Peltier saddled up on the R1 Mod

3. First try - in front the Peltier-Controller Board

4. First working Temp Measure: note(!) In=Ambient Temp 25.1C , and OUT=Minertemp! = 24,9C  Cool

5. First test @300MHz / Vcore 0.724 Volt

6. Second test @475MHz / Vcore 0.891 Volt working Temp Measure: In=Ambient Temp 24.7C (opened Window Wink) and OUT = Minertemp=41,1C

7. Third test @475MHz / screwed up Vcore to 0.900 Volt

8. Closer look @R1 running on 475Mhz

9. Screenshot of my Power Measuring Software - Consumption between 25 and 27 Watts @475MHz

Thats it for now Smiley
If any questions, feel free to ask me.

andY

Holy cow, this is sick!  Shocked Cool Very cool to see! Thx for sharing.
citronick
Legendary
*
Offline Offline

Activity: 1218
Merit: 1036


---- winter*juvia -----


View Profile
May 06, 2016, 05:14:52 AM

So,
like promised,
here some infos and a couple of first pics from my Peltier-cooled R1 Mod... Smiley

(Sorry, links only, but I hope, I get the Full member status asap, so Im able to insert the pics directly)

What Ive done with the R1 before:

1. disabled the internal power supply and using a Powerbrick with 5 Volt/10 Amp as supply
2. first trying to use heatsinks on both sides of BM1384, but decided finally to reuse the original case, because its in my eyes a good solution for heat dissipation
3. using twice new cooling pads on each sides of internal BM1384 for more pressure and better cooling conditions!
4. Vcore Mod with pot for variable VCore between 0.6 up to 1V
5. adding a Vcore voltmeter
6. add an Sharkoon HPS1
7. add an Peltier solution

But here finally some pics  Wink:

1. Sharkoon HPS1 Cooler stuffed with a 40x40 Peltier

2. Sharkoon HPS1 Cooler with Peltier saddled up on the R1 Mod

3. First try - in front the Peltier-Controller Board

4. First working Temp Measure: note(!) In=Ambient Temp 25.1C , and OUT=Minertemp! = 24,9C  Cool

5. First test @300MHz / Vcore 0.724 Volt

6. Second test @475MHz / Vcore 0.891 Volt working Temp Measure: In=Ambient Temp 24.7C (opened Window Wink) and OUT = Minertemp=41,1C

7. Third test @475MHz / screwed up Vcore to 0.900 Volt

8. Closer look @R1 running on 475Mhz

9. Screenshot of my Power Measuring Software - Consumption between 25 and 27 Watts @475MHz

Thats it for now Smiley
If any questions, feel free to ask me.

andY


Wow... this is amazing.... do you work for NASA or something?  Shocked  Grin

If I provided you good and useful info or just bring a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
jacobmayes94
Sr. Member
****
Offline Offline

Activity: 364
Merit: 250



View Profile
May 06, 2016, 08:36:36 AM

Those images don't work for me, what hashrate was he getting?

Jacob
andymanone
Sr. Member
****
Offline Offline

Activity: 432
Merit: 250


Save the past & use the future


View Profile
May 06, 2016, 09:09:57 AM
Last edit: May 06, 2016, 11:10:05 AM by andymanone

Holy cow, this is sick!  Shocked Cool Very cool to see! Thx for sharing.


Wow... this is amazing.... do you work for NASA or something?  Shocked  Grin

Thanks for the feedback, guys Grin!
Will upload more infos and pics soon Smiley

Haha, and no, I dont working for NASA Wink!


Those images don't work for me, what hashrate was he getting?

Jacob

@Jakob:
sorry, there seems to be a prob with my pic hoster at the moment Sad
Hope, its asap available.
Pic-Hoster is alive again.


@Hashrate:
here a short peek on my measured values:

Clockrate: 475 MHz
Multi: 0901 (hex)
Vcore: 0.900 V
Hashrate: ~ 28GHs
Power Consumption: max 27,7Watts

andY

#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehacks coming soon Bitfury Asic Miners!
Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore)

My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
jacobmayes94
Sr. Member
****
Offline Offline

Activity: 364
Merit: 250



View Profile
May 06, 2016, 09:30:59 AM

If these are the same chips as in the S7, think about what the S7 would be capable of if you had free eleccy.

XD
andymanone
Sr. Member
****
Offline Offline

Activity: 432
Merit: 250


Save the past & use the future


View Profile
May 06, 2016, 09:34:17 AM

If these are the same chips as in the S7, think about what the S7 would be capable of if you had free eleccy.

XD

Haha, yeaah Grin!
But no, the S7 works with the BM1385, but the Antrouter R1 comes with a BM1384
(its the same ASIC used in S5 and S5+)

andY


#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehacks coming soon Bitfury Asic Miners!
Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore)

My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
jacobmayes94
Sr. Member
****
Offline Offline

Activity: 364
Merit: 250



View Profile
May 06, 2016, 12:15:16 PM

With a good enough electronics knowledge and power supply, you could modify an S5 (with proper cooling, and power supply) to do something similar? Obviously it would use an insane amount of electricity, but is that possible XD especially if you could put it somewhere with free electricity, although the chips probably wouldn't last too long, even with reasonable cooling
RichBC
Hero Member
*****
Offline Offline

Activity: 574
Merit: 500



View Profile
May 06, 2016, 01:37:23 PM

With a good enough electronics knowledge and power supply, you could modify an S5 (with proper cooling, and power supply) to do something similar? Obviously it would use an insane amount of electricity, but is that possible XD especially if you could put it somewhere with free electricity, although the chips probably wouldn't last too long, even with reasonable cooling

Yes it can be done. I have had an S5 up to 425MHz with the standard core voltage of 0.8V which you get with a 12V supply. As you say with the right cooling and a small increase in the 12V supply to 13.5V which would give you a core voltage of 0.9V you could probably push on up to about 500MHz.  Smiley

Rich

→→→→→→→→→→→→→→→→→→ 💰 Hard-Disk Mineable Cryptocurrency !! B U R S T C O I N 💰 Cheap Price & Easy to Invest - CHECK IT OUT NOW! !! →→→→→→→→→→→→→→→→→→ 💰 Asset exchange, Automatic transactions, Escrow system & More !!
jacobmayes94
Sr. Member
****
Offline Offline

Activity: 364
Merit: 250



View Profile
May 06, 2016, 10:45:59 PM

What was the total hashrate?

btw I can be added to the run now! solo.ckpool.org/users/1KumpjxTB6scqwaZCXEwNx3jqEkRQh44dL


Smiley

Country is UK Smiley
RichBC
Hero Member
*****
Offline Offline

Activity: 574
Merit: 500



View Profile
May 06, 2016, 10:57:25 PM

What was the total hashrate?

btw I can be added to the run now! solo.ckpool.org/users/1KumpjxTB6scqwaZCXEwNx3jqEkRQh44dL


Smiley

Country is UK Smiley


At 425MHz Hash Rate was 1.4TH and at 500MHz it would be 1.65TH

Rich

→→→→→→→→→→→→→→→→→→ 💰 Hard-Disk Mineable Cryptocurrency !! B U R S T C O I N 💰 Cheap Price & Easy to Invest - CHECK IT OUT NOW! !! →→→→→→→→→→→→→→→→→→ 💰 Asset exchange, Automatic transactions, Escrow system & More !!
Mikestang
Legendary
*
Offline Offline

Activity: 1218
Merit: 1000



View Profile
May 07, 2016, 05:18:05 AM

Woo, I'm #1!  If only for a little bit.  Tongue

511k won't last too long at the top.
minibit
Sr. Member
****
Offline Offline

Activity: 280
Merit: 250



View Profile
May 07, 2016, 10:43:25 AM

What was the total hashrate?

btw I can be added to the run now! solo.ckpool.org/users/1KumpjxTB6scqwaZCXEwNx3jqEkRQh44dL


Smiley

Country is UK Smiley

Hi jacobmayes94

Cool! Ammi will soon add you to antrun.de.
Have a nice race  Cool
tagat
Newbie
*
Offline Offline

Activity: 46
Merit: 0


View Profile
May 07, 2016, 08:57:48 PM

Hello,

my first AntRouter is setting up and running.

http://solo.ckpool.org/workers/16A1Uv77mS3v1iGReQgSHfEbdiTNFhm6b5_Ant1

Code:


{"hashrate1m": "8.1G", "hashrate5m": "7.5G", "hashrate1hr": "2.28G", "hashrate1d": "99.2M", "hashrate7d": "14.2M", "lastupdate": 1458907068, "shares": 2000, "bestshare": 2417.3701850000002, "bestever": 2417}


a кaк нacтpoить?
tagat
Newbie
*
Offline Offline

Activity: 46
Merit: 0


View Profile
May 07, 2016, 09:10:12 PM

My first pool is the one that i have registered for the race.

As for the other pools, I created multiple BTC addresses to point to ckpool (who knows one day ck will announce an R1 as winner amazing block finder Grin)

Then, chose "Balance" to the failover  strategy so that R1 will cycle through all the mined addresses in a "balance" manner.

Maybe I didn't keep my R1 running long enough (always fine tuning the small guy every day).... any members who have successfully cycled to multiple pools?

Thanks!

a кaк нacтpoить Antrouter R1 нa solo.ckpool.org:3333) Я пpocтo в этoм дeлe нoвичoк. Ecли нe тpyднo мoжнo пoдpoбнeй(oт и дo) нaпишитe плиз Huh Huh
minibit
Sr. Member
****
Offline Offline

Activity: 280
Merit: 250



View Profile
May 07, 2016, 10:41:43 PM

My first pool is the one that i have registered for the race.

As for the other pools, I created multiple BTC addresses to point to ckpool (who knows one day ck will announce an R1 as winner amazing block finder Grin)

Then, chose "Balance" to the failover  strategy so that R1 will cycle through all the mined addresses in a "balance" manner.

Maybe I didn't keep my R1 running long enough (always fine tuning the small guy every day).... any members who have successfully cycled to multiple pools?

Thanks!

a кaк нacтpoить Antrouter R1 нa solo.ckpool.org:3333) Я пpocтo в этoм дeлe нoвичoк. Ecли нe тpyднo мoжнo пoдpoбнeй(oт и дo) нaпишитe плиз Huh Huh

See this image:  http://imgur.com/eiduCyz

As pool worker use your BTC address and a worker extension.


Example:

Pool:    stratum+tcp://de.ckpool.org:3333
Worker:   INSERTYOURBTCADDRESSHERE_R1
Password:      x
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [23] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 »
  Print  
 
Jump to:  

Bitcointalk.org is not available or authorized for sale. Do not believe any fake listings.
Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!