¤¤¤¤ antrun.de - Antrouter R1 Fun-Run - compare your share ¤¤¤¤

[vyckal]

 Thanks, ok,  bat I set this server de.ckpool.org:3333, I need to change it to solo.ckpool.org:3333 in my R1 ?

[1714817250]

1714817250

[1714817250]

1714817250

[1714817250]

1714817250

[Real-Duke]

Where do you live or better try to sent a ping to the DE and the "Standard" pool adress. Choose the adress with the better ping and thats all!

[Mikestang]

This is absolutely free and has no hidden fees or something.
It's just for fun to see the power of the different Antrouters.

What a great idea, this looks really fun.  Since my last U3 died I stopped using my R1, it was primarily to control the U3 and keep it from ZOMBIE.  But now I have a reason to get it out of the drawer and plug it in again, count me in.

Code:

http://solo.ckpool.org/workers/1KfpnRppLtm8DmNzvjQwC7pRMgJ9ZLv2Qi.r1
{"hashrate1m": "5.16G", "hashrate5m": "5.48G", "hashrate1hr": "3.02G", "hashrate1d": "209M", "hashrate7d": "30.6M", "lastupdate": 1458959150, "shares": 4325, "bestshare": 1863.213196620447, "bestever": 1863}

I forget what my best share was with it previously.

[ammi84]

vyckal and Mikestang - welcome on board - enjoy your stay 

[vyckal]

Thanks, good idea and good job with "R1 Fun-Run"

[willi9974]

@RichBC

why has you a speed from 15G

each member only one Antminer per Line :-)

Regards,
Willi

[ammi84]

@RichBC

why has you a speed from 15G

each member only one Antminer per Line :-)

Regards,
Willi

good idea
i updated the rules

"One line per R1"
You can have more than one R1 but each R1 must be seperated

[willi9974]

Perfect, or i burn a 1 PHs rental from nicehash :-)

[RichBC]

@RichBC

why has you a speed from 15G

each member only one Antminer per Line :-)

Regards,
Willi

It is only a single R1. I am running at a frequency of 200Mhz


Rich

[gt_addict]

Have you still got it running with an external power supply?

[RichBC]

Have you still got it running with an external power supply?

No this is a second unit in completely standard form. I have had it up to 250MHz, but 200MHz is the highest frequency I have been able to reliably run it at without increasing the core voltage or adding cooling.


Rich

[gt_addict]

Blimey. I can't get mine past 137M. Otherwise it just read 0.18ghs or so.

[RichBC]

Blimey. I can't get mine past 137M. Otherwise it just read 0.18ghs or so.

200 is pushing it and it does slow down and restart quite often, however you should be able to run at 150 without any problems.


Rich

[Mikestang]

Blimey. I can't get mine past 137M. Otherwise it just read 0.18ghs or so.

200 is pushing it and it does slow down and restart quite often, however you should be able to run at 150 without any problems.


Rich

Do you change the number in the voltage field when you adjust the frequency, or just set the freq and go?  I'm talking for minor oc'ing, like to 150 as you mentioned.

Here I thought I was doing well with a 120K share already, only to look and see I'm the lowest one so far, ha!

[citronick]

finally this R1 has some fun...

How do you overclock this R1?

1JqDhwuxgwCaQ1PZksYCDMgxAuMevzrzPH.Juvia_R1

Code:

{"hashrate1m": "10.8G", "hashrate5m": "7.94G", "hashrate1hr": "1.13G", "hashrate1d": "49.6M", "hashrate7d": "7.1M", "lastupdate": 1459142580, "shares": 1000, "bestshare": 1271.0301648095049, "bestever": 1271}

[RichBC]

Just go to the Configuration Advanced setting tab and set the Frequency, the Save & Apply. I did not think there was a voltage setting? I think that is only in the U3 setting?


Rich

 

[aarons6]

mines running 137.. seems stable at 7ghs.

[ammi84]

finally this R1 has some fun...

How do you overclock this R1?

1JqDhwuxgwCaQ1PZksYCDMgxAuMevzrzPH.Juvia_R1

Code:

{"hashrate1m": "10.8G", "hashrate5m": "7.94G", "hashrate1hr": "1.13G", "hashrate1d": "49.6M", "hashrate7d": "7.1M", "lastupdate": 1459142580, "shares": 1000, "bestshare": 1271.0301648095049, "bestever": 1271}

Hi,

i updated the Page
Welcome

[Mikestang]

Just go to the Configuration Advanced setting tab and set the Frequency, the Save & Apply. I did not think there was a voltage setting? I think that is only in the U3 setting?

I'll bump mine up a little bit then, I never did bother with upping the frequency before because I didn't really see the point for just another GH/s or two, but for the fun run I may as well.

Here's a screen cap from my R1, voltage setting is active under the R1 tab:

[RichBC]

Just go to the Configuration Advanced setting tab and set the Frequency, the Save & Apply. I did not think there was a voltage setting? I think that is only in the U3 setting?

I'll bump mine up a little bit then, I never did bother with upping the frequency before because I didn't really see the point for just another GH/s or two, but for the fun run I may as well.

Here's a screen cap from my R1, voltage setting is active under the R1 tab:

Ok you are running a different version than me. However the voltage setting will have no effect on the R1.


Rich