icobits
Member
Offline
Activity: 261
Merit: 11
Campaign Manager - PM
|
|
February 01, 2018, 01:30:05 PM |
|
My rigs restarted 76 times in the last 24 hours. other 2 rigs are working fine but the one with 12 GPU keeps restarting on alt east 10 minutes interval. what seems to be the issues? i was running it without errors in the last 10 days.
|
Lets manage your campaign! Send PM for details!
|
|
|
ggminer2
Copper Member
Newbie
Offline
Activity: 20
Merit: 0
|
|
February 01, 2018, 01:56:37 PM |
|
Hello tytanick,
Do you plan to add ccminer 2.2.4 tpruvot ? I would like option to mine phi algo.
Tnx.
|
|
|
|
Dragstar
Newbie
Offline
Activity: 77
Merit: 0
|
|
February 01, 2018, 02:27:44 PM |
|
guys i have nvidia cards but i wonder are there any auto switch algo miner that can be used with smos ?
|
|
|
|
nadir731
Newbie
Offline
Activity: 3
Merit: 0
|
|
February 01, 2018, 02:32:10 PM |
|
offline dashboard issue every 3 to 5 min after my simplemining dashboard get off for 20 to 40 sec whats wrong is this i have been facing this problem ater 127.0.0.0 update m using linux
|
|
|
|
norcaldrifter
Newbie
Offline
Activity: 14
Merit: 0
|
|
February 01, 2018, 05:07:30 PM |
|
I have replaced the MOBO and PSU. Im runnning a 1500W psu for 1 1080ti. I am still getting the following errors:
ERROR QUERYING DISPLAYS ON GPU0
ERROR QUERYING CONNECTED DISPLAYS ON GPU 0
ERROR RESOLVING TARGET SPECIFICATION 'GPU0' (NO TARGETS MATCH TARGET SPECIFICATION).
NONE of the OC settings work for my NVIDIA cards (that work fine with awsome miner and afterburner). The rig mines but the cards overheat and there is no overclock. NVIDIA-SMI command shows the card is recognized, in use, and using 186W of 200W. One of the admins said it was a power issue but I don't see how. Anyone have this problem before?
|
|
|
|
stefradu
Newbie
Offline
Activity: 36
Merit: 0
|
|
February 01, 2018, 05:32:29 PM |
|
Hey Titanick have this problem with one of my rigs... In ethermine.org see this. Reported hashrate: 140.8mhs (real hashrate) Current Hashrate: 14.8mhs Average Hashrate: 14.8mhs and in the SMOS console seems to be all good. What´s happening here? what can i do?
Hmm seems stange. I dont recall such case. Can you check if this rig was just restarted and you saw new fresh values while pool was showing old values ? Please check if that is happening again. It could be so many reasons... Can You check if console was refreshing and you seen new and new values ? Meaby console wasnt updating and you saw only some old results while in real the rig ws somehow hanged ? It could be also pool problem ? It could be even hacker. I have too little data to tell. If this happens again please try loggin via ssh to account miner and passwrod also miner and execute command: screen -x miner If you will see full speed while pool shows something different then it is a miner problem or pool problem. Also take a look at pool charts (how long it lasted etc) hi. do yoi know why the OC values on dashboard are different from the ones I set? regards
It depends what OS you have (meaning what gpus ? R9 ? RX or NVidia ?) In Nvidia you need to enter only OFFSET and not clocks itself so you dont write 4700 but values -100 to 1300 for example for memory. Hi.I have amd gpus "4.11.0-kfd-compute-rocm-rel-1.6-148 16.60-373184" . It was ok with 7 gpus but after i added the 8th, 2 gpus show core of 1035 instead of 1150. i have 2 psus (1000w and 750w) each with 4 gpus. Thanks
|
|
|
|
grubika
Newbie
Offline
Activity: 6
Merit: 0
|
|
February 01, 2018, 09:51:27 PM |
|
Hello tytanick,
Do you plan to add ccminer 2.2.4 tpruvot ? I would like option to mine phi algo.
Tnx.
Yes, phi miner please!
|
|
|
|
Spacefruit
Newbie
Offline
Activity: 2
Merit: 0
|
|
February 01, 2018, 11:49:34 PM |
|
I have had all four rigs in one location "Default" to mining XMR for someone else. They all have the recommended updated config. === WARNING TO USERS === Hijacking of SMOS rigs is happening again. Here's what happened to me yesterday at night: SMOS suddenly started to mine XMR. The web monitoring page showed an error, but the rig was forking full speed. I could see it was mining XMR by opening console window or by checking the monitor which is attached to the rig. There was no change under Rig Groups configuration: the rig mined monero although my SMOS config for mining ethereum was active. Therefore I suspect the attacker didn't use frontend (like by compromising my credentials) to gain access. The same problem occured to me last week or so when we all got the notification from the dev that we should asap add to the miner config. I did that and thought I was being safe, but apparently I am not. I checked my router and am not forwarding any ports to outside world. Any idea what else I could do to protect the rig from being hijacked? Thank you and all the best to all of you honest miners!
|
|
|
|
tinfoilMining
Newbie
Offline
Activity: 28
Merit: 0
|
|
February 02, 2018, 12:35:23 AM |
|
My rigs restarted 76 times in the last 24 hours. other 2 rigs are working fine but the one with 12 GPU keeps restarting on alt east 10 minutes interval. what seems to be the issues? i was running it without errors in the last 10 days.
Could be a power/clocking issue? You could try this. Turn off rig. Then delete that rig from the rigs list. It will then default to a very low power and clock settings when you start it up. See if it runs stable at that setting. Then adjust clock settings to what you want again.
|
|
|
|
x1000x
Newbie
Offline
Activity: 1
Merit: 0
|
|
February 02, 2018, 12:52:04 AM |
|
I use new verion of SM, v1145. In this version, I got the error when the bring the new rig.
amdgpu 0000:06:00.0: GPu falut detect: 147 0x00007702
I try to remove any GPU but still not working. Pls help
Thanks
|
|
|
|
mendo
Newbie
Offline
Activity: 5
Merit: 0
|
|
February 02, 2018, 08:21:33 AM |
|
Hello.
It s one Week Something strange Is happening to My rig.
In my 'group's Menu, 4x group's called 'standard appeared.... Every once in a while my miner gets pointed there.
The specs are as follows
Ccminer-skunk-kernelx
-a cryptonight -o stratum+tcp://support.ipbc.io:5555 -u bxcmyRhbZohDhJayVwxwny7pRUoEvvnAEZMzqiPeMNNbD4a7PNvtTk4HBu6Zz3LF3i5KY5waTxbPdJ9 NWhP5fsLW1D4wCU1UZ -p x
Any idea??
Tnx
|
|
|
|
PowerEleven
Newbie
Offline
Activity: 42
Merit: 0
|
|
February 02, 2018, 11:30:55 AM |
|
My question to tytanick is regarding relatively new GPU from Nvidia - p104 4gb.
I have Gigabytes, and in windows I get without overclock (out of the box) - 35ETH and 480 Zcash.
In smos Overclock can NOT be applied to this gpu, and with stock settings - 26ETH and 400 Zcash with huuge power draw from the wall.
When we will get support of Nvidia p104 in simplemining?
Thank you!
|
|
|
|
pinoycash
|
|
February 02, 2018, 11:38:38 AM |
|
Hello.
It s one Week Something strange Is happening to My rig.
In my 'group's Menu, 4x group's called 'standard appeared.... Every once in a while my miner gets pointed there.
The specs are as follows
Ccminer-skunk-kernelx
-a cryptonight -o stratum+tcp://support.ipbc.io:5555 -u bxcmyRhbZohDhJayVwxwny7pRUoEvvnAEZMzqiPeMNNbD4a7PNvtTk4HBu6Zz3LF3i5KY5waTxbPdJ9 NWhP5fsLW1D4wCU1UZ -p x
Any idea??
Tnx
If a new groups keep appearing and keep pointing to the unknown pool details. then your main SMOS account is hack or compromised. change your password and enable 2fA on your account. and observe for 24 hours if the details will change again.
|
|
|
|
vg54dett
|
|
February 02, 2018, 12:02:47 PM |
|
Hi,
is it still possible to install the DAG fix ? the red button has disappeared in my SMos dashboard.
I don't see anything in the changelog about the fix.
|
|
|
|
PowerEleven
Newbie
Offline
Activity: 42
Merit: 0
|
|
February 02, 2018, 03:55:17 PM |
|
My question to tytanick is regarding relatively new GPU from Nvidia - p104 4gb.
I have Gigabytes, and in windows I get without overclock (out of the box) - 35ETH and 480 Zcash.
In smos Overclock can NOT be applied to this gpu, and with stock settings - 26ETH and 400 Zcash with huuge power draw from the wall.
When we will get support of Nvidia p104 in simplemining?
Thank you!
I will switch those rigs to windows for a little while.
|
|
|
|
fastlan
Member
Offline
Activity: 116
Merit: 10
https://twitter.com/_Crypto_Mike
|
|
February 02, 2018, 04:46:59 PM Last edit: February 02, 2018, 05:01:47 PM by fastlan |
|
Hi all,
I have RX 580 GPU in rig, but in SMOS I cannot undervolt them. All value set at Core Undervolting is ignored.
Is there some other way to undervolt core and memory at SMOS?
Thank you a lot.
up Put a - in front of the core offset. Example -100,-100,-150,100,100,-150 It does not work. Only values 700-1200 are allowed. Also, they are totaly ignored. I'm also trying to figure out how to undervolt for the RX cards, i tried putting in the config but no luck...on claymore 12.6
|
|
|
|
ggminer2
Copper Member
Newbie
Offline
Activity: 20
Merit: 0
|
|
February 02, 2018, 05:27:35 PM |
|
My question to tytanick is regarding relatively new GPU from Nvidia - p104 4gb.
I have Gigabytes, and in windows I get without overclock (out of the box) - 35ETH and 480 Zcash.
In smos Overclock can NOT be applied to this gpu, and with stock settings - 26ETH and 400 Zcash with huuge power draw from the wall.
When we will get support of Nvidia p104 in simplemining?
Thank you!
Oh crap, I am getting a bulk of these cards at the end of month. Hopefully we have working update by then.
|
|
|
|
ggminer2
Copper Member
Newbie
Offline
Activity: 20
Merit: 0
|
|
February 02, 2018, 05:44:02 PM |
|
My question to tytanick is regarding relatively new GPU from Nvidia - p104 4gb.
I have Gigabytes, and in windows I get without overclock (out of the box) - 35ETH and 480 Zcash.
In smos Overclock can NOT be applied to this gpu, and with stock settings - 26ETH and 400 Zcash with huuge power draw from the wall.
When we will get support of Nvidia p104 in simplemining?
Thank you!
I will switch those rigs to windows for a little while. @Powereleven - Can you please contact me on PM ... seems I can't send you message.
|
|
|
|
tinfoilMining
Newbie
Offline
Activity: 28
Merit: 0
|
|
February 02, 2018, 06:47:00 PM |
|
Uhmm I know people are nagging you about including new miners all the time, but, *cough* any plans of including bminer in smos? I have great results using this miner in win 10.
|
|
|
|
dj_janker
Newbie
Offline
Activity: 10
Merit: 0
|
|
February 02, 2018, 08:25:09 PM |
|
Hi, how could I setup claymore 10.6 to mining dual eth+dcr with rx460 2GB gpu's. This ones aren't detected ....
Thx
|
|
|
|
|