[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[WaveRiderx]

think i might switch to this OS.

But I need these updated miners for my rigs, could you please add these, they are tweaked for specific algos. Top one is most important atm.  Would much appreciate

ccminer-x64-2.2.4-cuda9
ccminer-820-cuda91-x64
hsrminer_neoscrypt

Thanks

[BigA3723]

Has anyone setup multi algo switching on MPH?

Looking at setting it up to mine the most profitable Equihash coin.

Been using it with DSTM 5.8 for 2 weeks and I haven’t had even one restart on 5 rigs of 46 cards total, I’ve been choosing to get paid in ZCL for the fork, will go to ZEN after, if you choose that option, it converts the 4 different equihash coins into a coin of your choosing, can be BTC or any coin they have.

[infectious]

Hey Tytanick, I agree with nakan79 that you're doing a good job all on your own. You have a great product and you're moral which is more than I can say for many in your field.

Most of the requests that I see between here and the Rocket Chat that have merit tend to be about adding new and improved miner iterations and the rare genuine suggestion for improvement. These suggestions are not coming from noobs. They are coming from people who are using your work and understand it well. You should be focused on this group rather than trying to please all the people all the time. It's noble to wish to do that but it is a waste of your time.

GravityMaster did a good job of providing the noobs a FAQ. Maybe hire someone to do something similar but you just oversee it rather than writing it yourself.

Also, maybe you appoint someone to curate whatever you end up with as a forum, and then with the results from the curator, you then put the requests to a vote. I do think it would serve you well to draw a line between noobs and veterans and the banked funds are as good a way as anything else. It should probably be quite a bit higher than just five dollars. Maybe even $20 or higher. Anyone with a rig or two is unlikely to bank a bunch of money and at least that way you exclude some of the idiots from voting. It might even be an idea to have two forums. One for the veterans, and another for everyone else. And then have a moderator appointed to kick out the idiots that slip through. One thing I noticed about Rocket Chat is that there was no way to ban or silence any of the idiots. That took away from the experience a little. I think many of the really knowledgeable veterans grew tired of the more irritating participants and moved on.

Anyway, keep up the good work. What you've done and continue to do is very much appreciated by those who actually understand.

Any thoughts on that ? I want to make this pool as fair as possible.

400 pages in this topic proof the good work of developers. I think it makes no sense to pay special attention to the owners of a small number of rigs. Concentrate on the owners of large (10 + / 20 + / 50 +) rigs. Or just develop, as you see. You really make a good product.

From my point it makes huge difference.
Listening to only large farms is not something i want to do over small users.
Still you are right that bigger farms will have some features that are not wanted by single rig users.
The 5$ deposit was just making sure that somewone wont create multiple accounts for voting
I want to listen big farms and also single rig users.
From my point both are important and i dont want to focus on one of this group.
The most wanted features are forum, ccminer and OC groups.
In mean while there are some changes that needs to be done in code because it totally not optimized.
On the other hand, i am receiving few emails about some features but i cant really know what people really want.
So this voting pool would be good start point to see what people want and to do most wanted things
The voting system is something that i spoted in few exchanges and i guess it is good start.

Also i MUST implement some kind of forum and i will be looking into it soon.
If you guys have any recommendations about forums scripts then please offer here.
I will be looking into them and comparing with some top forum scripts.
The rocket chat was very good idea but right now it is a complete mess.
People can talk and can ask whatever they want but i think that too many people are asking the same over and over and chat inst good for this

The FAQ also will be totally rewritten when i will find some time

Anyway thanks guys for support

Also... I dig up something from my past
IT IS VERY OLD and DEPREACED !!!!, but funny thing
https://twitter.com/tytanick . (first post)
https://www.startjoin.com/EasyMiner

[jayblues1337]

can you add the new ccminer updates and various different forks of it  please been needing this for a while only can mine Equihash on your service and miss out on some new coins that use the new algos please respond because it looks like you only care for certain algos and to make decent proper amounts of btc or other top coin is to jump on these new coins and catch them early

[Rcalin]

You prommised me and my buddy miners(we have 96 rigs in total, on your service), that in maxim 2 weeks we will have last ccminer. 1 month later, still no ccminer, and no update about it.

Great service, thanks.

[tytanick]

Dashboard v3036
- added Litecoin as service fee deposits
- google captcha is now back again
- cosmetics changes in dashboard
- changing password will log out all other sessions
- big php code improvment

You prommised me and my buddy miners(we have 96 rigs in total, on your service), that in maxim 2 weeks we will have last ccminer. 1 month later, still no ccminer, and no update about it.
Great service, thanks.

Yes i did say that
We had problem with ccminer that will be solved soon.
I understand your disapointment.
We still need some time but much shorter.


About hiring people.
It is all beeing covered.
Can not say details about this
If everything will go as planned then soon development will have speedup
And this is all i wish right now

[WaveRiderx]

that captcha is much better thank you.  makes a big difference for mobile use.

let us know when you add the updated ccminers.  will use windows until then, need it for coin.

Thanks

[tytanick]

that captcha is much better thank you.  makes a big difference for mobile use.
let us know when you add the updated ccminers.  will use windows until then, need it for coin.
Thanks

The ccminer is beeing one of my highest priorities now.

[WaveRiderx]

that captcha is much better thank you.  makes a big difference for mobile use.
let us know when you add the updated ccminers.  will use windows until then, need it for coin.
Thanks

The ccminer is beeing one of my highest priorities now.

awesome

[Bimmber]

tytanick,

Have you made any changes to miners/SMOS in last 24 hours? I have started to get reboots on one of my rigs and these huge hashrate swings which I did not have before. My hashrate is 9500 sol/s, but on pool now it swings like mad. My average hashare on pool also has dropped as you can see.

https://i.imgur.com/b8Dw4PI.jpg

[maxmeme]

Your work has been great and without your support, SMOS will not becomes what it is today. Keep working and we will support you.

[zdokadia]

Hi,

I am using Asrock H81 Pro BTC 2.0 motherboard with AMD RX470 8GB Mining Edition cards. I am powering the rig with 2 x Corsair 750W power supplies. The primary power supply powers the CPU, motherboard, risers for 3 GPUs and 3 GPUs itself. The secondary PSU powers 3 risers and its respective GPUs. I am running SMOS obviously but for some strange reason, my rig does not detect all 6 cards. I have tried rebooting and this takes the number of active cards up and down but I have not been able to get 6 cards to work. The new mining edition cards have some LEDs at the back. I can see the white LED is up for all 6 but there is a green LED at the back which is lit up for 5 cards only. For the one that does not light up, I have changed the riser, provided it power through an exclusive cable (rather than powering 2 GPUs with one cable) but nothing seems to work.

Any help would be appreciated.

Regards
Zaheed

[chuck732]

So when will you add support for cpu mining? There just sitting why not use the cpu to mine too!

[luzvo]

power consumption : Tytanick, settings below 900mV seem not to work on RX570/580 cards I have here (Sapphire Nitro, Pulse). Didn't try any else.

With SMOS, the lowest consumption I can achieve is ~150W at wall.  Asus Prime H270-Plus with January2018 BIOS, CPU G4560, 4GB RAM, single RX580 Sapphire Nitro at this moment but I tested with different cards up to 7 installed, 240V Europe, Corsair TX-850M (should be about 89.5% effective at this load). GPU 1000MHz, VMEM 1900MHz, underclocked BIOS.

MB+CPU+RAM consume 35W idle in Windows and SMOS without any GPU installed  - 35W measured at wall [!] after power supply ineffectivity etc.  With single GPU installed but not mining, Windows consumes about 47W ; SMOS 65W. Windows configured with High Performance profile, no CPU savings, no PCI-e savings in BIOS.


GPU Voltage set in web interface  |  Consumption at wall with SMOS

1100mV   180W
1000mV   170W
900mV   153W
850mV     153W
800mV   153W
750mV     153W

I feel it does NOT work as it should.

Powerstage 0      153W
Powerstage 1      153W
Powerstage 2      153W
Powerstage 3      153W
Powerstage 4      153W
Powerstage 5      153W
Powerstage 6      153W

Powerstage setting has absolutely no effect on power consumption at all. All these tests conducted with 1000MHz GPU, 1900MHz VMEM, 27.2MH/s. This particular card maxes out at 1950MHz memories no matter what voltage I apply, it's a crap.

I know PowerStage settings work in different settings and scenarios - I'm running some rigs with 1100MHz GPUs, 2000+MHz VMEMs and there is big difference in power consumption between PS6 and PS2. Generally I'm using PowerStage2 almost everywhere because PS1 and PS0 do NOT bring any decrease in real consumption / temperatures and everything above PS2 is heavily increasing power consumption.  Because I'm totally stable at PS2, that's what I use ; difference in power consumption between PS6 and PS2 is about 400 Watts with each [!] rig I have.

Here, in this particular case, PowerStage has totally no influence on power consumption.


GPU voltage settings BELOW 900mV  DO NOT have any effect on total consumption in SMOS, while they work in Windows. Decreasing GPU and VMEM in ATI WattMan (newest drivers, Adrenaline v18.2.3 dated 22/Febr/2018) below 900mV works correctly in Windows, HWINFO64 and GPU-Z report lower voltages for both memory and GPU and it is reflected on real wattage measured at wall.  I can get to 750mV GPU and VMEM with 120W total rig consumption at wall and yes, it's stable at 1000/1900MHz.

Lowest I'm able to achieve with SMOS is 152-153W.  I've tried so much...

 
So, the effective delta in power consumption between Windows and SMOS can be 20 Watts per card.  With 10 card rig, that is 200 Watts which really is a lot, especially if you have 10+ rigs.  Will you please look into this ? Any diagnostic output you need ? I can give you SSH access if needed.

And it's not just about power consumption - it's about temperatures, too. Of course Windows10 runs these cards cooler, because it is able to use lower voltage.

I even tried to lower voltages in BIOS, programming 850 (manual) or 65282 even 65281 in appropriate frequencies. Makes no difference in both Windows and SMOS.
Measurements in Windows taken with lowest voltage set as 65282 in BIOS. I'm not saying this is equivalent of 750mV, I'm saying power management in Ubuntu might be "not optimal" and potentially not working below 900mV. Regardless of what is in BIOS, it works in Windows.

Any hints or tips, please throw my way.  Is there anything in Ubuntu like HWINFO64 in Windows ? How can I display parameters of AMD RX570/580, such as frequencies, voltages etc ?

[cosmiclevis]

are there any SSR agents for MAC?

[xtreeme99]

Hi,

Please provide feedback on the DAGfix. Running 6x rx580 rig on SMOS and supposedly the DAGfix can be flashed on the riglist, but I don't see such option:

https://i.imgur.com/oeMqGNW.png

OS Version shows RX 1146
Thanks.

I'll bump  the issue above - please provide feedback.
After the update to version RX 1147, the status is same.

[Bimmber]

tytanick

When can we expect more miners to be added to SMOS, like lyra, skein etc?

[citronick]

tytanick

When can we expect more miners to be added to SMOS, like lyra, skein etc?

current ccminer can already do all that, but ccminer-alexis fork best for skein, and latest ccminer should be updated to get the best for the other algos.

[xtreeme99]

Hello again,

I recived the SRR v2 and I msut say the delivery was super fast to Estonia.
I got 7 cables instead of ordered 6 pcs. If you wish me to compensate, please give details how to

I encountered a few problems.
1) My MOBO is Asus prime Z270-P and there is no "pwr button + -" pins. Please see image:
 https://image.ibb.co/gBaUfx/20180227_212659_1.jpg

I Tried to use PWR-SW since the original power button was connected there, but no luck. SRR doesnt see the rig.

Moreover, when launching the SRR, under windows I can see the device but get the following error: "Error while getting info from device"

Please advise how to troubleshoot.

[HaberHash]

I see tons of requests for new miners and other improvements, which are important but I'd like to see alerting added.  You can have all of the miners versions in the world, but if they go offline or are having other issues how do you know?  Certainly having an SSR would help.  That's not always possible.  I like SMOS, but when comparing to HIVE OS, SMOS is missing some important functionality.

Perhaps if a roadmap was outlined.  That way we can know various features and functionality as well as when they may be coming or at the very least their priorities.

Thanx!