[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[tytanick]

Update v1286
- NEW added ability to run miner as ROOT which is applicable on some additional parameters in few miners that need ROOT access to change timings
- NEW added ability to set MVDDCI (memory voltage controller works only on NAVI - RX5700 series and can save another 2-6 watt per GPU ) This is not for old RX570 !
- added MVDD and MVDDCI tooltips which will help you understand both parameters

[ivcelmik]

Hi all ,

can someone help me how to activate on 1080Ti 5500 Mhz by default because they start at 5000Mhz.

Thank you in advance,
Best Regards

[tytanick]

Hi all ,

can someone help me how to activate on 1080Ti 5500 Mhz by default because they start at 5000Mhz.

Thank you in advance,
Best Regards

OK, please write to me at admin@simplemining.net and let me know your rig name
I will check it.

[ivcelmik]

Hi all ,

can someone help me how to activate on 1080Ti 5500 Mhz by default because they start at 5000Mhz.

Thank you in advance,
Best Regards

OK, please write to me at admin@simplemining.net and let me know your rig name
I will check it.

Email sent.

Ty

[tymeksm]

New BETA SimpleMining images with WiFi support:
- Added WiFi support. File config.txt has new options for enable WiFi and  provide network name and password
- Supported WiFi cards only natively by Linux kernel 5.4
- Tested WiFi cards that works: USB TP-LINK TL-WN821N/TL-WN823N, USB Tenda U6,  PCI-Express TP-LINK TL-WN781ND Rev3.0, PCI-Express Tenda W322E
- Tested WiFi cards that do not work: USB TP-LINK Archer T2UH AC600, USB TP-LINK Archer T2U Nano, USB TP-LINK Archer T4U
- Kernel upgraded to 5.4 series
- Faster network interface initialization
- Fixed long wait (up to 5min) for local console login if network connection failed
- New fully complete firmware package for common system devices
- New images available in download section for direct download and in Advanced Commands for live reflash.

[alucard20724]

i just want to confirm if you support CPU mining or not.  I didn't see it in the original post.  I would try this, but i have a lot of 3rd gen ryzens that would go to waste if i couldn't mine with them.

No, i do not support CPU mining. We only support GPU mining for nvidia and amd.

Cpu mining does not make any sense. Generates more heat and it is not profitable to do that.
Also it might cause some unstability for GPU mining so we do not want this and we do not recommend it.
Even if you would be mining with CPU and it would be "profitable" - you could earn like pennies. Its not worth it.

Actually, the AMD 3rd gen ryzens make money.  I make about $300 a month with ten 3rd gen ryzens (3XXX series amd cpu: two 3600, three 3600X, one 3800X, one 3900X, one 3900XT, one 3950X, and one 3960X) on RandomX, M7M, RandonSFX, and Verushash... though for randomx, they work best when matched with 32gb of DDR4-3200.  the most cost effect cpu is the 3600.. which you can make your money back on the cpu alone in about 100 days.

the only times i have issues is when i gpu mine with TRM... TRM doesn't like to initialize gpus when CPU is under load from cpu mining.  Phoenix miner, and Lolminer have no issues when cpu mining also.

[Metroid]

Actually, the AMD 3rd gen ryzens make money.  I make about $300 a month with ten 3rd gen ryzens (3XXX series amd cpu: two 3600, three 3600X, one 3800X, one 3900X, one 3900XT, one 3950X, and one 3960X) on RandomX, M7M, RandonSFX, and Verushash... though for randomx, they work best when matched with 32gb of DDR4-3200.  the most cost effect cpu is the 3600.. which you can make your money back on the cpu alone in about 100 days.

the only times i have issues is when i gpu mine with TRM... TRM doesn't like to initialize gpus when CPU is under load from cpu mining.  Phoenix miner, and Lolminer have no issues when cpu mining also.

If you think earning cents with it is good then by all means continue. I have a ryzen 3600 too, last time i saw its profitability which was 3 days ago, it made 0 cents a day.

https://whattomine.com/coins/101-xmr-randomx?hr=6800.0&p=200.0&fee=2&cost=0.1&hcost=0.0&commit=Calculate

[philipma1957]

Actually, the AMD 3rd gen ryzens make money.  I make about $300 a month with ten 3rd gen ryzens (3XXX series amd cpu: two 3600, three 3600X, one 3800X, one 3900X, one 3900XT, one 3950X, and one 3960X) on RandomX, M7M, RandonSFX, and Verushash... though for randomx, they work best when matched with 32gb of DDR4-3200.  the most cost effect cpu is the 3600.. which you can make your money back on the cpu alone in about 100 days.

the only times i have issues is when i gpu mine with TRM... TRM doesn't like to initialize gpus when CPU is under load from cpu mining.  Phoenix miner, and Lolminer have no issues when cpu mining also.

If you think earning cents with it is good then by all means continue. I have a ryzen 3600 too, last time i saw its profitability which was 3 days ago, it made 0 cents a day.

https://whattomine.com/coins/101-xmr-randomx?hr=6800.0&p=200.0&fee=2&cost=0.1&hcost=0.0&commit=Calculate

I can get it to burn 100 watts not 200

the trick to a good mix is use the cpu set volts to 1.05  and mine with 1 good card an amd 5700

look at the miner wattage  with no mining at all

then look at watts  just the card mining

then look at the wattage with the cpu and the one card mining.

any amd below rig with 1 card or 2 cards makes more money mining with xmd on the cpu

3600 cpu and 1 amd 5700 card
3700 cpu and 1  "
3800 cpu and 1  "
3900 cpu and 1  "
3950 cpu and 1  "
3960 cpu and 1  "
3970 cpu and 1  "

I have tested all above.

I have 5 3900 rigs with 1 card
I have a 3970 rig with 1 card
I have a 3960 rig with 1 card

[alucard20724]

Actually, the AMD 3rd gen ryzens make money.  I make about $300 a month with ten 3rd gen ryzens (3XXX series amd cpu: two 3600, three 3600X, one 3800X, one 3900X, one 3900XT, one 3950X, and one 3960X) on RandomX, M7M, RandonSFX, and Verushash... though for randomx, they work best when matched with 32gb of DDR4-3200.  the most cost effect cpu is the 3600.. which you can make your money back on the cpu alone in about 100 days.

the only times i have issues is when i gpu mine with TRM... TRM doesn't like to initialize gpus when CPU is under load from cpu mining.  Phoenix miner, and Lolminer have no issues when cpu mining also.

If you think earning cents with it is good then by all means continue. I have a ryzen 3600 too, last time i saw its profitability which was 3 days ago, it made 0 cents a day.

https://whattomine.com/coins/101-xmr-randomx?hr=6800.0&p=200.0&fee=2&cost=0.1&hcost=0.0&commit=Calculate

my electricity is only $0.05/kwh... in dallas texas.  i get commercial rates for the place i live.  it's mixed use business/residential. 

[tymeksm]

Miners update:
- xmrig-v6.3.3 (Fixed self-select login sequence. Improved CUDA loader error reporting and fixed plugin load)

[tymeksm]

Miners update:
- cryptodredge-v0.25.1 (Improve MTP algo. Improve Argon2d (NIM) algo. Add optimizer (Argon2d (NIM) only). Allow floating-point intensity. Fix CryptoNight issue related to launch timed out and was terminated. Remove --recompute option. Remove obsolete algos. Other minor fixes)
- gminer-v2.22 (added 3GB solver for BeamHashIII)
- miniz-v1.6v6 (Improved stability in all algos. Added --stale=n option to help deal with high number of stale shares. Fixed invalid shares while mining beam. Fixed stale shares that were misidentified as invalid on daPool. Smarter check when ssl/tls mining if user does not declare it. Other minor bug fixes)

[tytanick]

Dashboard update

- extended valid limits for inputs: mvdd 1100-1400 and mvddci 600-950 for RX5700 series (NAVI)

[Demented247]

Dashboard update

- extended valid limits for inputs: mvdd 600-950 and mvddci 1100-1400 for RX5700 series (NAVI)

Hi Mr Tytus, please can we urgently get update to latesr T-Rex miner.

Kind Regards

[tytanick]

Hi Mr Tytus, please can we urgently get update to latesr T-Rex miner.
Kind Regards

Newest t-rex is unstable, we are not adding it on purpuse

https://github.com/trexminer/T-Rex/issues/69

[tymeksm]

Miners update:
- xmrig-v6.3.3-2 (updated cuda plugin with fixed broken AstroBWT on NVIDIA)

[citronick]

Tytanick.... would you consider adding DOGE as one of the payment options.

DOGE has cheap fees and very fast transactions.

DOGE is #48 in Coinmarketcap Top 100 coins.

BTC, ETH and ETC are not good payment options currently.

Thanks

[tymeksm]

Miners update:
- t-rex-v0.16.2 (New --low-load cmd line parameter to optionally opt in for using CUDA kernels that put less stress on the GPUs where running regular kernels cause instability. Currently this is only applicable to kawpow and DAG generation in particular - use this option in SimpleMining if rig crashed after miner start from this version. Fixed init enumerate code -6 error when applying memory tweaks to P102/104/106 cards. Fixed memory tweaks stuck after the miner termination. Fixed memory tweaks becoming inactive in case of network issues or overclock adjustments)

[tytanick]

Tytanick.... would you consider adding DOGE as one of the payment options.

DOGE has cheap fees and very fast transactions.

DOGE is #48 in Coinmarketcap Top 100 coins.

BTC, ETH and ETC are not good payment options currently.

Thanks

I have VERY hard time adding yet another coin but in deed DOGE would be first that i would add in smos
Right now i will do not touch it as i am no longer developing old dashboard and it is some more mess for me but i will think about this also in future.
Actually i will also add PayPal in future but for bigger deposits like >10-20 $ to cover they F* fees which are smaller than ETH now hahah !

Thx for Suggestion

[tytanick]

Update v1287
- fixed missing GPU names / bios names
- fixed nanominer
- improved ROOT miner mode
- improved GPUs detection after reboot and sending stats changes
- added warning message if system detects Nvidia OC not working due to lib error
- advanced reflash command now copies wifi settings

[tymeksm]

Miners update:
- teamredminer-v0.7.10 (Added default log filename trm__<yyyymmdd_hhmmss>.log. Added ethash forced initial allocated epoch - HIGHLY recommended for 4GB rigs. Added ethash DAG build slowdown configuration. Added ethash DAG build staggering across gpus. Added ethash intensity ramp-up. Added option for forcing dev fee region. Added MTP for Navi gpus. Added MTP ramp-up after pad rebuild. Fixed error printouts on failed watchdog script execution. Stats now shows more clocks and temps, and also adds gpu state in hashrate prints)