My second ZEC + XMR+ ETH thread builds info links thoughts and photos.

[HerbPean]

Alright, I got 6 full cards hashing at stock at the moment. (not for a long time, last time it took 10 mins to crash)

After uninstalling and reinstall amd driver a lots, I downloaded their cleanup utility. I manually removed all rx470 from the device manager with driver's delete option. Launched the cleanup and rebooted, launched the clean again and rebooted. Downloaded the latest driver, I always used 16.9.2, installed the 16.10.1 drivers. Rebooted.

I'm going to bed, but it looks good !

Thanks to everyone for all the inputs.

Hoping I can OC them a bit tomorrow

EDIT: And GPU hangs in OpenCL call, exit... It tried to restart but it's not working

I get those from time to time too. Mostly now when. I updated to claymore 7.0 and above
Not saying it is calymore but I see it more with 7.0 or newer

Great infos ! Thanks you.

What's your frequency ?

I run 1500 strap with 1130core and 1945 mem all modded bios

Sorry I wasn't clear for the last question. I meant, how frequent are you getting the hang error ?

thanks for the OC freq ;-) I will be playing with that tonight.

[xleejohnx]

Alright, I got 6 full cards hashing at stock at the moment. (not for a long time, last time it took 10 mins to crash)

After uninstalling and reinstall amd driver a lots, I downloaded their cleanup utility. I manually removed all rx470 from the device manager with driver's delete option. Launched the cleanup and rebooted, launched the clean again and rebooted. Downloaded the latest driver, I always used 16.9.2, installed the 16.10.1 drivers. Rebooted.

I'm going to bed, but it looks good !

Thanks to everyone for all the inputs.

Hoping I can OC them a bit tomorrow

EDIT: And GPU hangs in OpenCL call, exit... It tried to restart but it's not working

I get those from time to time too. Mostly now when. I updated to claymore 7.0 and above
Not saying it is calymore but I see it more with 7.0 or newer

Great infos ! Thanks you.

What's your frequency ?

I run 1500 strap with 1130core and 1945 mem all modded bios

Sorry I wasn't clear for the last question. I meant, how frequent are you getting the hang error ?

thanks for the OC freq ;-) I will be playing with that tonight.

Hahaha my bad

Today was the first time in two days but for awhile there it was everyday

I had to setup claymore with -r 2 command because it wouldn't restart the miner without a complete system restart

[HerbPean]

Alright, I got 6 full cards hashing at stock at the moment. (not for a long time, last time it took 10 mins to crash)

After uninstalling and reinstall amd driver a lots, I downloaded their cleanup utility. I manually removed all rx470 from the device manager with driver's delete option. Launched the cleanup and rebooted, launched the clean again and rebooted. Downloaded the latest driver, I always used 16.9.2, installed the 16.10.1 drivers. Rebooted.

I'm going to bed, but it looks good !

Thanks to everyone for all the inputs.

Hoping I can OC them a bit tomorrow

EDIT: And GPU hangs in OpenCL call, exit... It tried to restart but it's not working

I get those from time to time too. Mostly now when. I updated to claymore 7.0 and above
Not saying it is calymore but I see it more with 7.0 or newer

Great infos ! Thanks you.

What's your frequency ?

I run 1500 strap with 1130core and 1945 mem all modded bios

Sorry I wasn't clear for the last question. I meant, how frequent are you getting the hang error ?

thanks for the OC freq ;-) I will be playing with that tonight.

Hahaha my bad

Today was the first time in two days but for awhile there it was everyday

I had to setup claymore with -r 2 command because it wouldn't restart the miner without a complete system restart

yeah i have the same behavior ! You guys are amazing. I will add that to my command line.

Thanks again

EDIT: just got the hand issue again. Maybe i should try with the driver version 15.2

[xleejohnx]

Alright, I got 6 full cards hashing at stock at the moment. (not for a long time, last time it took 10 mins to crash)

After uninstalling and reinstall amd driver a lots, I downloaded their cleanup utility. I manually removed all rx470 from the device manager with driver's delete option. Launched the cleanup and rebooted, launched the clean again and rebooted. Downloaded the latest driver, I always used 16.9.2, installed the 16.10.1 drivers. Rebooted.

I'm going to bed, but it looks good !

Thanks to everyone for all the inputs.

Hoping I can OC them a bit tomorrow

EDIT: And GPU hangs in OpenCL call, exit... It tried to restart but it's not working

I get those from time to time too. Mostly now when. I updated to claymore 7.0 and above
Not saying it is calymore but I see it more with 7.0 or newer

Great infos ! Thanks you.

What's your frequency ?

I run 1500 strap with 1130core and 1945 mem all modded bios

Sorry I wasn't clear for the last question. I meant, how frequent are you getting the hang error ?

thanks for the OC freq ;-) I will be playing with that tonight.

Hahaha my bad

Today was the first time in two days but for awhile there it was everyday

I had to setup claymore with -r 2 command because it wouldn't restart the miner without a complete system restart

yeah i have the same behavior ! You guys are amazing. I will add that to my command line.

Thanks again

You need to add a reboot.bat file in claymore if you use that command

[HerbPean]

took me about 25 reboot to have all 6 cards running again. I'm using a double DPS-2000 PSU running at 12.16v. Might be the voltage on the card. A bit high for their clocking. I might have 2 or 3 cards sensible to that.

I will use 2 RM 1000 tonight to play with that.

[philipma1957]

Twenty five reboots. Ugh

On my end.  The hurricane made a small leak in the solar array.

Water got into the atx running the four card z170 mobo causing a short in the mobo near the 8 pin CPU cable jack.

So,far all four gpus seem okay.
The higher end m2 ssd survived
The 8 gb ram stick is good.
The CPU cooler is good.


The CPU is yet to be tested.



The psu is toast.
The mobo is toast.

So I spent today redesigning the setup with a proper rain shield for both the s9s and the Ethcoin pc's

As of now I am running 3 s9s and 1 s7. I have the part for btc mining done.


Tomorrow or thurs I will bring another mobo over with four gpus and try again.

The new rain leak  protected setup should allow for five s9s one s7 and two four card eth rigs.

About 9600 watts

[xleejohnx]

took me about 25 reboot to have all 6 cards running again. I'm using a double DPS-2000 PSU running at 12.16v. Might be the voltage on the card. A bit high for their clocking. I might have 2 or 3 cards sensible to that.

I will use 2 RM 1000 tonight to play with that.

The issues you are having me questioning things.
Like when I was stock mining I had 6 gpus on one 1000watt psu
It was dual too pulling almost 1300watts. Not sure how the psu didn't explode
But I didn't have any problems. I'm thinking that h81 mobo is the devil and root of all evil

[philipma1957]

took me about 25 reboot to have all 6 cards running again. I'm using a double DPS-2000 PSU running at 12.16v. Might be the voltage on the card. A bit high for their clocking. I might have 2 or 3 cards sensible to that.

I will use 2 RM 1000 tonight to play with that.

The issues you are having me questioning things.
Like when I was stock mining I had 6 gpus on one 1000watt psu
It was dual too pulling almost 1300watts. Not sure how the psu didn't explode
But I didn't have any problems. I'm thinking that h81 mobo is the devil and root of all evil

It is very solid with four cards.

But herb and I got them as a great deal on Amazon.  Maybe the seller had issues and dumped them cheap

[generalt]

Sorry to hear about all the water damage Phil.  Glad to hear none of the video cards got damaged at least.

[GabryRox]

Big shout out to Phil for sending me the extra molex cable I needed to get my 4th 470 up and running! Thanks also for the extra goodies you included Phil... really appreciate it!

So, as it stands now, I am getting just shy of 82 Mh/s on ETH and about 1300 Mh/s on DCR.  I am happy to finally have this rig running with 4 GPU's but I am still baffled at how these MSI 470's are only getting 20.7 per unit on ETH.  I have tried pretty much everything suggested in this forum and in the Claymore readme file but nothing notably effects the speed of ETH mining. I've done the following:

- Added the 5 setx lines to my .bat file
- Added the "-ethi xx" command within the command line of the .bat file. Tried it at 10, 12, 14 & 16.
- Added the "-ethi xx" command to the config file. Tried it at 10, 12, 14 & 16 in various places.
- Increased my Virtual Memory from 16GB to 24GB

None of these moved the needle on ETH mining at all... still all 4 GPU's averaging 20.7 per unit. The only thing that effected ETH speed at all, was to ratchet down DCR intensity significantly but the minimal gain of .4% (from 20.72 to 20.82) would actually be more than offset by the dramatic decrease in DCR effectiveness. On the flip-side, bumping up DCR to 35 increased its hash-rate by ~15% but only nominally effected ETH mining (less than .1%). Bottom line, nothing I've have tried so far is getting me even remotely in the ballpark of the ~23 Mh/s that others are getting from those GPU's out of the box.

I would almost just think I got a bad batch, but my 4 GPUs came from 2 different vendors (3 from Amazon and 1 from NewEgg), spread over 3 orders over 2-3 weeks, so this seems unlikely.  I really wanted to close this gap before proceeding with modding, but it's looking bleak at this point.  I am putting off purchasing a 5th GPU for this rig until I can figure out exactly how much I can improve its current performance. Frankly, at less than 21 per card, it's barely going to be profitable, especially at the ridiculous power draw it is currently at... which reminds me...

So, I have my rig plugged into a KilaWatt unit. While running the rig with 3 GPUs, it was pulling around 630-640 watts. This seemed high to me because I was thinking max of 330 for the GPUs +140 for the i7-6800k, which left about 160 watts for the Mobo, SSD, heatsink, etc. Again, seemed a bit high but not out of the realm of possibilities.

Well, here's the perplexing thing... after hooking up the 4th GPU, KilaWatt now says I am using 810 watts!  That's a 170 watt bump over the 3 GPU set-up. So, how exactly can a GPU with a max TPD of 110 watts add 170 watts of power usage?  At this rate, I couldn't even add another GPU to this rig as my PSU is 1kw.  I know I need to really dig into the power settings that have been mentioned here recently but was wondering if anyone could explain how a 110w GPU could add 170w to my power draw.

Thanks again for any tips!

[generalt]

Big shout out to Phil for sending me the extra molex cable I needed to get my 4th 470 up and running! Thanks also for the extra goodies you included Phil... really appreciate it!

So, as it stands now, I am getting just shy of 82 Mh/s on ETH and about 1300 Mh/s on DCR.  I am happy to finally have this rig running with 4 GPU's but I am still baffled at how these MSI 470's are only getting 20.7 per unit on ETH.  I have tried pretty much everything suggested in this forum and in the Claymore readme file but nothing notably effects the speed of ETH mining. I've done the following:

- Added the 5 setx lines to my .bat file
- Added the "-ethi xx" command within the command line of the .bat file. Tried it at 10, 12, 14 & 16.
- Added the "-ethi xx" command to the config file. Tried it at 10, 12, 14 & 16 in various places.
- Increased my Virtual Memory from 16GB to 24GB

None of these moved the needle on ETH mining at all... still all 4 GPU's averaging 20.7 per unit. The only thing that effected ETH speed at all, was to ratchet down DCR intensity significantly but the minimal gain of .4% (from 20.72 to 20.82) would actually be more than offset by the dramatic decrease in DCR effectiveness. On the flip-side, bumping up DCR to 35 increased its hash-rate by ~15% but only nominally effected ETH mining (less than .1%). Bottom line, nothing I've have tried so far is getting me even remotely in the ballpark of the ~23 Mh/s that others are getting from those GPU's out of the box.

I would almost just think I got a bad batch, but my 4 GPUs came from 2 different vendors (3 from Amazon and 1 from NewEgg), spread over 3 orders over 2-3 weeks, so this seems unlikely.  I really wanted to close this gap before proceeding with modding, but it's looking bleak at this point.  I am putting off purchasing a 5th GPU for this rig until I can figure out exactly how much I can improve its current performance. Frankly, at less than 21 per card, it's barely going to be profitable, especially at the ridiculous power draw it is currently at... which reminds me...

So, I have my rig plugged into a KilaWatt unit. While running the rig with 3 GPUs, it was pulling around 630-640 watts. This seemed high to me because I was thinking max of 330 for the GPUs +140 for the i7-6800k, which left about 160 watts for the Mobo, SSD, heatsink, etc. Again, seemed a bit high but not out of the realm of possibilities.

Well, here's the perplexing thing... after hooking up the 4th GPU, KilaWatt now says I am using 810 watts!  That's a 170 watt bump over the 3 GPU set-up. So, how exactly can a GPU with a max TPD of 110 watts add 170 watts of power usage?  At this rate, I couldn't even add another GPU to this rig as my PSU is 1kw.  I know I need to really dig into the power settings that have been mentioned here recently but was wondering if anyone could explain how a 110w GPU could add 170w to my power draw.

Thanks again for any tips!

Have you tried only mining eth with the cards just to see what the speeds would be like?  -mode 1

[philipma1957]

dual miner is power hungry like mad.  Just do Eth.

I bet you liked the surprise cables.  I like to do that.  Doe not cost much and we all have a little bit of kid left in us or we would not be doing this in the first place.

I got to get two of my rigs out of the house  the GARAGE is 93f!  the den is 83f the bedroom we sleep in is 82f .

that all translates to the wife will get pissed very soon.

I will post new setup for solar array  maybe on thurs.  I hope to have 3 s9's and 1 s7  along with 2 four card the rigs setup by thurs.

that is 24 amps about 5760 watts and one full circuit.  still have more circuits left.

[GabryRox]

Thanks for the tip generalt... I just tried that and it didn't really impact ETH speed... went from like 20.72 to 20.75 per card... BUT, along the lines of what Phil just mentioned, shutting off dual-mining cut my power draw from 810 to just under 700!  I will have to do the math on the DCR piece but I doubt it makes sense with its current rate at only $1.  Also, seemed that my card temps were down as well so yet another reason to probably solo mine.

Yeah thanks again Phil, I especially liked the fan and will put it to good use. Don't need the extra SATA cable at the moment but could certainly put that to good use in the future when I build my dream personal system with multiple SSDs & HDDs 

I hear you on the heat issue... not sure how you can sleep in 82 lol, I have trouble sleeping in anything over low 70's.  I have my current rig in my garage, which has no ventilation but is very cool most of the time so no issue, at least with 1 rig. Since I am in a cool weather climate in Oregon, I am really considering building a 2nd rig and placing it in my main living area for heating. Maybe it won't 100% offset what I would normally pay for extra heat but I bet it would at least come close, which means better profit margin. Fact is that I need heating of some degree 8-9 months of the year here, so definitely something to factor into the equation. 

[xleejohnx]

Big shout out to Phil for sending me the extra molex cable I needed to get my 4th 470 up and running! Thanks also for the extra goodies you included Phil... really appreciate it!

So, as it stands now, I am getting just shy of 82 Mh/s on ETH and about 1300 Mh/s on DCR.  I am happy to finally have this rig running with 4 GPU's but I am still baffled at how these MSI 470's are only getting 20.7 per unit on ETH.  I have tried pretty much everything suggested in this forum and in the Claymore readme file but nothing notably effects the speed of ETH mining. I've done the following:

- Added the 5 setx lines to my .bat file
- Added the "-ethi xx" command within the command line of the .bat file. Tried it at 10, 12, 14 & 16.
- Added the "-ethi xx" command to the config file. Tried it at 10, 12, 14 & 16 in various places.
- Increased my Virtual Memory from 16GB to 24GB

None of these moved the needle on ETH mining at all... still all 4 GPU's averaging 20.7 per unit. The only thing that effected ETH speed at all, was to ratchet down DCR intensity significantly but the minimal gain of .4% (from 20.72 to 20.82) would actually be more than offset by the dramatic decrease in DCR effectiveness. On the flip-side, bumping up DCR to 35 increased its hash-rate by ~15% but only nominally effected ETH mining (less than .1%). Bottom line, nothing I've have tried so far is getting me even remotely in the ballpark of the ~23 Mh/s that others are getting from those GPU's out of the box.

I would almost just think I got a bad batch, but my 4 GPUs came from 2 different vendors (3 from Amazon and 1 from NewEgg), spread over 3 orders over 2-3 weeks, so this seems unlikely.  I really wanted to close this gap before proceeding with modding, but it's looking bleak at this point.  I am putting off purchasing a 5th GPU for this rig until I can figure out exactly how much I can improve its current performance. Frankly, at less than 21 per card, it's barely going to be profitable, especially at the ridiculous power draw it is currently at... which reminds me...

So, I have my rig plugged into a KilaWatt unit. While running the rig with 3 GPUs, it was pulling around 630-640 watts. This seemed high to me because I was thinking max of 330 for the GPUs +140 for the i7-6800k, which left about 160 watts for the Mobo, SSD, heatsink, etc. Again, seemed a bit high but not out of the realm of possibilities.

Well, here's the perplexing thing... after hooking up the 4th GPU, KilaWatt now says I am using 810 watts!  That's a 170 watt bump over the 3 GPU set-up. So, how exactly can a GPU with a max TPD of 110 watts add 170 watts of power usage?  At this rate, I couldn't even add another GPU to this rig as my PSU is 1kw.  I know I need to really dig into the power settings that have been mentioned here recently but was wondering if anyone could explain how a 110w GPU could add 170w to my power draw.

Thanks again for any tips!

I would push down the core 20%
Up the memory to 1850
That will up the MHs and lower the power without bios mod
120tdp isnt the max power draw.
Also msi cards have a high power set than the other 470s
If you want help with bios mod I will help anyway I can
If you pay 10cents or more in power I wouldn't dual mine. Your only talking about maybe 10-20$ profit
Pushing the cards harder and hotter for only 20$ ehh I'll save them

[HerbPean]

Twenty five reboots. Ugh

On my end.  The hurricane made a small leak in the solar array.

Water got into the atx running the four card z170 mobo causing a short in the mobo near the 8 pin CPU cable jack.

So,far all four gpus seem okay.
The higher end m2 ssd survived
The 8 gb ram stick is good.
The CPU cooler is good.


The CPU is yet to be tested.



The psu is toast.
The mobo is toast.

So I spent today redesigning the setup with a proper rain shield for both the s9s and the Ethcoin pc's

As of now I am running 3 s9s and 1 s7. I have the part for btc mining done.


Tomorrow or thurs I will bring another mobo over with four gpus and try again.

The new rain leak  protected setup should allow for five s9s one s7 and two four card eth rigs.

About 9600 watts

Yeah i'm starting to think the same thing, the deal was too nice to be good !! (as the usual !!)

I'm trying with a RM 1000 for the MOBO + riser and Seasonic 1200 for the cards.

So far, not good.

Suck for the water ....

EDIT: Also 5 cards seems to be real good, only the 6th is testing my patience. ;-)

[GabryRox]

Big shout out to Phil for sending me the extra molex cable I needed to get my 4th 470 up and running! Thanks also for the extra goodies you included Phil... really appreciate it!

So, as it stands now, I am getting just shy of 82 Mh/s on ETH and about 1300 Mh/s on DCR.  I am happy to finally have this rig running with 4 GPU's but I am still baffled at how these MSI 470's are only getting 20.7 per unit on ETH.  I have tried pretty much everything suggested in this forum and in the Claymore readme file but nothing notably effects the speed of ETH mining. I've done the following:

- Added the 5 setx lines to my .bat file
- Added the "-ethi xx" command within the command line of the .bat file. Tried it at 10, 12, 14 & 16.
- Added the "-ethi xx" command to the config file. Tried it at 10, 12, 14 & 16 in various places.
- Increased my Virtual Memory from 16GB to 24GB

None of these moved the needle on ETH mining at all... still all 4 GPU's averaging 20.7 per unit. The only thing that effected ETH speed at all, was to ratchet down DCR intensity significantly but the minimal gain of .4% (from 20.72 to 20.82) would actually be more than offset by the dramatic decrease in DCR effectiveness. On the flip-side, bumping up DCR to 35 increased its hash-rate by ~15% but only nominally effected ETH mining (less than .1%). Bottom line, nothing I've have tried so far is getting me even remotely in the ballpark of the ~23 Mh/s that others are getting from those GPU's out of the box.

I would almost just think I got a bad batch, but my 4 GPUs came from 2 different vendors (3 from Amazon and 1 from NewEgg), spread over 3 orders over 2-3 weeks, so this seems unlikely.  I really wanted to close this gap before proceeding with modding, but it's looking bleak at this point.  I am putting off purchasing a 5th GPU for this rig until I can figure out exactly how much I can improve its current performance. Frankly, at less than 21 per card, it's barely going to be profitable, especially at the ridiculous power draw it is currently at... which reminds me...

So, I have my rig plugged into a KilaWatt unit. While running the rig with 3 GPUs, it was pulling around 630-640 watts. This seemed high to me because I was thinking max of 330 for the GPUs +140 for the i7-6800k, which left about 160 watts for the Mobo, SSD, heatsink, etc. Again, seemed a bit high but not out of the realm of possibilities.

Well, here's the perplexing thing... after hooking up the 4th GPU, KilaWatt now says I am using 810 watts!  That's a 170 watt bump over the 3 GPU set-up. So, how exactly can a GPU with a max TPD of 110 watts add 170 watts of power usage?  At this rate, I couldn't even add another GPU to this rig as my PSU is 1kw.  I know I need to really dig into the power settings that have been mentioned here recently but was wondering if anyone could explain how a 110w GPU could add 170w to my power draw.

Thanks again for any tips!

I would push down the core 20%
Up the memory to 1850
That will up the MHs and lower the power without bios mod
120tdp isnt the max power draw.
Also msi cards have a high power set than the other 470s
If you want help with bios mod I will help anyway I can
If you pay 10cents or more in power I wouldn't dual mine. Your only talking about maybe 10-20$ profit
Pushing the cards harder and hotter for only 20$ ehh I'll save them

Yeah, my electricity is 11 cents, so doing rough math for 110 watts, cost me about $9/month. At best with 4 GPU's on DCR, I could mine maybe 15 in a month, so at DCR current rates, maybe $5 profit/month at best so really not worth it.  Now, if it goes $2 and above then certainly worth looking at but not really at $1.

I am curious on your 2 suggestions... can these settings be done within the AMD WattMan App?  I haven't really dug into that yet but if it is indeed managed there, I will certainly try that ASAP!

[xleejohnx]

Big shout out to Phil for sending me the extra molex cable I needed to get my 4th 470 up and running! Thanks also for the extra goodies you included Phil... really appreciate it!

So, as it stands now, I am getting just shy of 82 Mh/s on ETH and about 1300 Mh/s on DCR.  I am happy to finally have this rig running with 4 GPU's but I am still baffled at how these MSI 470's are only getting 20.7 per unit on ETH.  I have tried pretty much everything suggested in this forum and in the Claymore readme file but nothing notably effects the speed of ETH mining. I've done the following:

- Added the 5 setx lines to my .bat file
- Added the "-ethi xx" command within the command line of the .bat file. Tried it at 10, 12, 14 & 16.
- Added the "-ethi xx" command to the config file. Tried it at 10, 12, 14 & 16 in various places.
- Increased my Virtual Memory from 16GB to 24GB

None of these moved the needle on ETH mining at all... still all 4 GPU's averaging 20.7 per unit. The only thing that effected ETH speed at all, was to ratchet down DCR intensity significantly but the minimal gain of .4% (from 20.72 to 20.82) would actually be more than offset by the dramatic decrease in DCR effectiveness. On the flip-side, bumping up DCR to 35 increased its hash-rate by ~15% but only nominally effected ETH mining (less than .1%). Bottom line, nothing I've have tried so far is getting me even remotely in the ballpark of the ~23 Mh/s that others are getting from those GPU's out of the box.

I would almost just think I got a bad batch, but my 4 GPUs came from 2 different vendors (3 from Amazon and 1 from NewEgg), spread over 3 orders over 2-3 weeks, so this seems unlikely.  I really wanted to close this gap before proceeding with modding, but it's looking bleak at this point.  I am putting off purchasing a 5th GPU for this rig until I can figure out exactly how much I can improve its current performance. Frankly, at less than 21 per card, it's barely going to be profitable, especially at the ridiculous power draw it is currently at... which reminds me...

So, I have my rig plugged into a KilaWatt unit. While running the rig with 3 GPUs, it was pulling around 630-640 watts. This seemed high to me because I was thinking max of 330 for the GPUs +140 for the i7-6800k, which left about 160 watts for the Mobo, SSD, heatsink, etc. Again, seemed a bit high but not out of the realm of possibilities.

Well, here's the perplexing thing... after hooking up the 4th GPU, KilaWatt now says I am using 810 watts!  That's a 170 watt bump over the 3 GPU set-up. So, how exactly can a GPU with a max TPD of 110 watts add 170 watts of power usage?  At this rate, I couldn't even add another GPU to this rig as my PSU is 1kw.  I know I need to really dig into the power settings that have been mentioned here recently but was wondering if anyone could explain how a 110w GPU could add 170w to my power draw.

Thanks again for any tips!

I would push down the core 20%
Up the memory to 1850
That will up the MHs and lower the power without bios mod
120tdp isnt the max power draw.
Also msi cards have a high power set than the other 470s
If you want help with bios mod I will help anyway I can
If you pay 10cents or more in power I wouldn't dual mine. Your only talking about maybe 10-20$ profit
Pushing the cards harder and hotter for only 20$ ehh I'll save them

Yeah, my electricity is 11 cents, so doing rough math for 110 watts, cost me about $9/month. At best with 4 GPU's on DCR, I could mine maybe 15 in a month, so at DCR current rates, maybe $5 profit/month at best so really not worth it.  Now, if it goes $2 and above then certainly worth looking at but not really at $1.

I am curious on your 2 suggestions... can these settings be done within the AMD WattMan App?  I haven't really dug into that yet but if it is indeed managed there, I will certainly try that ASAP!

Yes those settings are for wattman. It'll be the easiest way to play around with

[HerbPean]

Phil, I sent a email to the guy who sold our MOBO and he was mining with ubuntu. Never been able to have all 6 card working with windows (not sure how did he tried).

So before I decided to do a full re-install of Win 10. Lucky me my usb key wasn't reconize, had to go with the iso way and use another program to flash my usb. I decided to give it a last try and the 6 cards was mining happy all night long.

I did some remote desktop this morning, process kind of freeze until I went to the station and everything was fine. Process unlock like 1 hour later ... strange behavior.

I did some remote just 5 minutes ago, same shit. process was running but not mining, no error ... just stuck in time.

4 GB on Win 10 seems to be quite short ...

Who is mining ETH on Ubuntu ? I need all the info to try that !

Thanks guys !

[xleejohnx]

Phil, I sent a email to the guy who sold our MOBO and he was mining with ubuntu. Never been able to have all 6 card working with windows (not sure how did he tried).

So before I decided to do a full re-install of Win 10. Lucky me my usb key wasn't reconize, had to go with the iso way and use another program to flash my usb. I decided to give it a last try and the 6 cards was mining happy all night long.

I did some remote desktop this morning, process kind of freeze until I went to the station and everything was fine. Process unlock like 1 hour later ... strange behavior.

I did some remote just 5 minutes ago, same shit. process was running but not mining, no error ... just stuck in time.

4 GB on Win 10 seems to be quite short ...

Who is mining ETH on Ubuntu ? I need all the info to try that !

Thanks guys !

mining on linux isnt the best way to go.
gpus on linux use more power than windows
just my 2 cents

[HerbPean]

Phil, I sent a email to the guy who sold our MOBO and he was mining with ubuntu. Never been able to have all 6 card working with windows (not sure how did he tried).

So before I decided to do a full re-install of Win 10. Lucky me my usb key wasn't reconize, had to go with the iso way and use another program to flash my usb. I decided to give it a last try and the 6 cards was mining happy all night long.

I did some remote desktop this morning, process kind of freeze until I went to the station and everything was fine. Process unlock like 1 hour later ... strange behavior.

I did some remote just 5 minutes ago, same shit. process was running but not mining, no error ... just stuck in time.

4 GB on Win 10 seems to be quite short ...

Who is mining ETH on Ubuntu ? I need all the info to try that !

Thanks guys !

mining on linux isnt the best way to go.
gpus on linux use more power than windows
just my 2 cents

Thanks ! I will not try them.

The guy is telling me to try not to power the riser (I use PCI-E for the riser) and plug the two molex on the MOBO. It is safe ? two molex for 6 risers .... looks unsafe to me.

EDIT: I'm starting to see some stability ... will add 4 more GB to the setup (for vnc / fake locking up process). 3 Reboot, full hash power.