My second ZEC + XMR+ ETH thread builds info links thoughts and photos.

[bittawm]

i am using the same build as phills. however I am having some trouble

I am having trouble having all 4 cards to mine at full speed, when all 4 of them are plugged in one gpu always mines at 4mhs instead of 24mhs, i have tested all cards individually and all work, i have testeded all slots individually and they work,
please please help me kind souls

that bug has occurred with a few of us.

what cards do you use.

I have exactly the same bug.

MB - Z97 GAMING 5. All cards are RX 480 Nitro+ (on powered risers)

Tried everything - always one card  is 4MH/s

Make sure crossfire and ULPS are disabled. Regedit is the best way to go.

and how do we do that mate?

[1714900164]

1714900164

[1714900164]

1714900164

[1714900164]

1714900164

[1714900164]

1714900164

[1714900164]

1714900164

[bittawm]

i am using the same build as phills. however I am having some trouble

I am having trouble having all 4 cards to mine at full speed, when all 4 of them are plugged in one gpu always mines at 4mhs instead of 24mhs, i have tested all cards individually and all work, i have testeded all slots individually and they work,
please please help me kind souls

that bug has occurred with a few of us.

what cards do you use.

I have exactly the same bug.

MB - Z97 GAMING 5. All cards are RX 480 Nitro+ (on powered risers)

Tried everything - always one card  is 4MH/s

Is it the card with the monitor hooked up to it? If so, put the monitor on a different card

 

yeah sapphire and xfx have this issue. 

swap the monitor cable  from card to card.

also if you are an hdmi cable try using this

https://www.amazon.com/Cable-Matters-Gold-Plated-DisplayPort/dp/B004C9P9TM/ref=sr_1_2?


or if the card has a dvi  jack

https://www.amazon.com/dp/B014I8UU2W/ref=sr_ph_1?


all miners should have a few of the above  they have helped me with black screen issues and with the dreaded 4mh bug

I am having both black screens and 4mhs bug, so sad

[ps_jb]

yeah sapphire and xfx have this issue. 

swap the monitor cable  from card to card.

also if you are an hdmi cable try using this

https://www.amazon.com/Cable-Matters-Gold-Plated-DisplayPort/dp/B004C9P9TM/ref=sr_1_2?


or if the card has a dvi  jack

https://www.amazon.com/dp/B014I8UU2W/ref=sr_ph_1?


all miners should have a few of the above  they have helped me with black screen issues and with the dreaded 4mh bug

I did not check is it related with monitor or not. But when I have a HDMI dongle - I have the same issue

Do you think it is cable?

[ps_jb]

Make sure crossfire and ULPS are disabled. Regedit is the best way to go.

They were disable from the beginning

Thank you!

[bittawm]

so my computer blue screened after running the 4mhs card and now its working

what the actual.....

[philipma1957]

The following is about ETH mining


 SOME blue screen/ MOST black screen/ ALL 4mhs bug all are about the display driver for hdmi.

It comes it goes. XFX and Sapphire do it most.

I use hdmi/dvi/display cables and adapters  and usually one of them will fix  a rig.  I also move the cable from jack to jack to jack to jack on all four cards.


the 7mhs bug is when the card is too hot .



I am old school I use dvi monitors  with dvi/usb/kvm switches.

I got 3 monitors at 59 each sale at best buy
I got 3 switches at 75 each used on ebay

I can do 12 rigs in my garage and one in my den

52 card max.

I will also get some going at the solar array 

[GabryRox]

Well, it seems I am jinxed in my efforts to get a 6-GPU system up and running lol.  Granted, my first attempt was on an unproven X99 Mobo, so I am willing to take that as a learning experience but now I am having trouble getting past 4 GPUs on a ASRock BTC Pro mobo that I know for a fact there are probably 1,000's out there running 6 GPUs smoothly.

Anyway, here's the latest.  I was running stable with 4 GPUs in PCIe slots 1, 3, 4 & 5.  Although Phil sent me a x16 ribbon riser, I can't fit it in with my current rig config, so I tried what someone else recommended on this thread... changing PCIe to Gen1 in the BIOS.  After about 45 minutes of searching through the BIOS, I finally found this and set to Gen1. Rebooted once, then powered off and plugged in GPU #5 to the x16 slot via USB Powered Riser.  Powered on and once again, system wont even get past post. 

However, since I haven't bought my 6th GPU yet, i decided to give up temporarily on that x16 slot and plug GPU #5 into the 5th x1 slot.  Hooked everything up exactly the way the other 4 GPUs are, booted up and it seemed to be having problems.  It seemed to stutter or restart a couple of times rather than just 1 as with my other GPU installs.  Finally got to windows startup screen and I logged in.  But here's where the problem shows up...

The pop-up about installing the driver for device pops up but instead of saying driver installation complete in a few seconds, it hangs up for a bit then returns a message saying that device driver could not be installed correctly.  I rebooted a few times, including once where I completely unplugged and replugged the GPU, but got the exact same problem.

When I go into Device Manager, this 5th GPU shows up with the dreaded exclamation point in yellow triangle. When I click on properties is says that windows disabled this device due to error code 43.  I googled this error and employed the recommended fix as follows:

- right click on bad GPU
- select properties
- go to driver tab
- uninstall driver

- right click on Display Devices
- choose Search for new hardware
- this finds the 5th GPU
- but, when I attempt to install the driver again it doesn't work. it tries and for a brief moment, the 5th GPU shows up in device manager without the error triangle, but a screen flicker later, it is back to appearing with the error 43 and will of course not even be recognized by Claymore.

So, has anyone experienced this issue with GPU?  Would be very happy to hear some suggestions on what to try to fix it. Thanks!

[HerbPean]

Well, it seems I am jinxed in my efforts to get a 6-GPU system up and running lol.  Granted, my first attempt was on an unproven X99 Mobo, so I am willing to take that as a learning experience but now I am having trouble getting past 4 GPUs on a ASRock BTC Pro mobo that I know for a fact there are probably 1,000's out there running 6 GPUs smoothly.

That's pretty much where I am with my 2 H81 Pro BTC, pass the 4 cards, it's nightmare. 4 is sometime fine, but I can't push the card. 3 seems to be fined with a lot of OC.

I run 4 on one and 2 on the other one.

Tested pretty much everything possible.

I'm getting a brand new one this week. I shall see.

[QuintLeo]

I am old school I use dvi monitors  with dvi/usb/kvm switches.

 You, sir, are fairly new school.

 *I* am old school - all of my switches are 2xPS2 for KB/Mouse + VGA, or adaptered from older AT KB + serial mouse + VGA switches.

 I'm finding it's usually cheaper to adapter from HDMI to VGA (and is a LOT cheaper to adapter from older cards with DVI-I to VGA) and get the common LOW COST VGA switches, though I might start moving to 2xUSB + VGA switches as MB with 2x PS2 type connectors are getting far to uncommon.


 Most recent rig "rebuild" with the pair of Sapphire RX470 cards I got today was a pain - ended up having to swap some stuff around to free up an extra HDMI -> VGA adapter to use as a "dongle" - one thing I like about all of my NVidia cards is that NONE of them need that stupid stuff, they just WORK no dongles or adapters needed even under WinDoze.


 Down side - they'e backplate cards so they won't work in a 4-card on MB build, though they're fine otherwise.
 They also run somewhat on the warm side.

 Up side - inexpensive and they're pulling 21 MH/s (ETH) or 205ish sol/s (ZEC) out of the box - and they actually work with Claymore v9.1 (they had constant issues with "crashout before connection established" issues with both 9.0 AND 8.0).


 Don't get me started on Wattman - AMD has a VERY VERY LONG WAY to go before they can even get into shouting range of Afterburner, ESPECIALLY on fan control.
 Wattman is TRASH - I've ended up just deleting that "new control panel version" junk out entirely and upgrading to Afterburner 4.3.0

[GabryRox]

Well, it seems I am jinxed in my efforts to get a 6-GPU system up and running lol.  Granted, my first attempt was on an unproven X99 Mobo, so I am willing to take that as a learning experience but now I am having trouble getting past 4 GPUs on a ASRock BTC Pro mobo that I know for a fact there are probably 1,000's out there running 6 GPUs smoothly.

That's pretty much where I am with my 2 H81 Pro BTC, pass the 4 cards, it's nightmare. 4 is sometime fine, but I can't push the card. 3 seems to be fined with a lot of OC.

I run 4 on one and 2 on the other one.

Tested pretty much everything possible.

I'm getting a brand new one this week. I shall see.

Hmmm that's disheartening to hear.The thing I don't get is that there are probably 1000's of these boards running 6 GPUs worldwide and never seen anyone mention these issues on the youtube videos.  I mean, these boards are designed for mining and miners natural expect all 6 PCI slots to work fine, but seems like more and more problems popping up... could it be only with the R2.0 versions?  Anyway, I posted a thread to tech support in the ASRock forum querrying about the same 2 issues so I will pass along any info i get there if it works.  I also have a 2nd one that I havent even cracked the box on yet since I got 2 from Amazon when they first came back in stock about 5 weeks ago. Beginning to wonder if that was a mistake.

[arielbit]

what's up with this dummy plugs? ... since i started mining in 2013 i didn't have to use one.

the only time i used a dummy dvi plug when i was trying to change the clocks in amd catalyst per card, when i plug the dummy to second card it will become the default display and then i can change clocks in that card (using amd catalyst).....that was waaaay back in the past until i figured out that i can change clocks using mining software and apps like msi afterburner and sapphire trixx..

i'm suspecting radmin (remote access software i'm using)...i don't know...you guys can take a look and test it, this might be the one that saved me from dummy plugs..maybe because it installed "radmin mirror driver" in display adapters in device manager..

this desktop pc i'm using (with fury card as my primary gpu), i tested plugging a rx 480 with usb riser (as a second card) and it hashes with 84 H/s (ZEC) or something, i forgot the exact numbers but it is really low hash....one difference i can point out to my mining rigs is this desktop pc has no "radmin mirror driver" installed because it is a client not a server (it is the pc i am using to access the mining rigs in my LAN)

test it guys and share here if it worked.

[philipma1957]

 A quote From this thread



https://bitcointalk.org/index.php?topic=1668461.0

The problem with these types of "start-up" mining manufacturing companies is that they basically have no capital. So the only way they can produce these miners at mass quantity is for large amounts of capital, which they don't have.

So its the same story as always. They only accept BTC, and with enough orders they can order parts from suppliers, and then they build the miners which can take months. However like in the past... in 6 months ZEC/ETH might not be profitable at all OR when they finally build these miners in 3 months... they will mine with them for 3 months and ship them 3 months after that ... like it was in the past with many Bitcoin ASICs.

So Philipma might get some demo unit next month but they can't accept any more Paypal payments only Bitcoin and telling when those actually units ships is anybodies guess.

Hi, we already under production, bro , we all know paypal is the way to product buyer, and easy to get account frozen, that why we can not accept paypal payment. BUT now, we  made promise to send
an sample to Philipma, and we will make it.Hope you understand!

I  have been contacted via email and I have been offered a  demo model:

Hi,
Really sorry for what we said, we are just the fresh man of shipping aboard, so we are cautious.
Also, we heard lot of bad things about paypal, quite risky to use it, easy to get account frozen.
We are wondering how to build trusty between us, so we decided to send you miner before you pay, which means
We agree to your request for payment upon arrival of the goods.
Or we send you as a demo, then after the test you send back to us.
We will be responsible for all the freight.
You can choose anyway ,hope you can understand.
 Look forward for your reply.

Best Regards,

PandaMiner Service





I will post all tests here  I may ship it back Or I may buy it if I like it.

So lets hope I get it soon.

This look like it can be used in a data center more then a home setup.
We shall soon (I Hope ) know.

I want to thank PandaMiner for contacting me. I am willing to give a person a break and their email was nice.
As I said I see a purpose for this gear.

The thread is an interesting read.

[citronick]

Hi Philip, looking forward to see your review of the Pandaminer when it reaches you.
Am I correct to assume that this is an aggregator board / box for AMD GPUs up to 8 x GPUs?
 

[philipma1957]

Hi Philip, looking forward to see your review of the Pandaminer when it reaches you.
Am I correct to assume that this is an aggregator board / box for AMD GPUs up to 8 x GPUs?
 

yes it should have 8 mobile rx 480 gpus inside it.

this is almost certainly a data center /warehouse miner .

 a guy with power to spare and no room.

At 2000 usd it is fairly well priced

I just need to know software power sound heat stats  to know how good it is.

[HerbPean]

Well, it seems I am jinxed in my efforts to get a 6-GPU system up and running lol.  Granted, my first attempt was on an unproven X99 Mobo, so I am willing to take that as a learning experience but now I am having trouble getting past 4 GPUs on a ASRock BTC Pro mobo that I know for a fact there are probably 1,000's out there running 6 GPUs smoothly.

That's pretty much where I am with my 2 H81 Pro BTC, pass the 4 cards, it's nightmare. 4 is sometime fine, but I can't push the card. 3 seems to be fined with a lot of OC.

I run 4 on one and 2 on the other one.

Tested pretty much everything possible.

I'm getting a brand new one this week. I shall see.

Hmmm that's disheartening to hear.The thing I don't get is that there are probably 1000's of these boards running 6 GPUs worldwide and never seen anyone mention these issues on the youtube videos.  I mean, these boards are designed for mining and miners natural expect all 6 PCI slots to work fine, but seems like more and more problems popping up... could it be only with the R2.0 versions?  Anyway, I posted a thread to tech support in the ASRock forum querrying about the same 2 issues so I will pass along any info i get there if it works.  I also have a 2nd one that I havent even cracked the box on yet since I got 2 from Amazon when they first came back in stock about 5 weeks ago. Beginning to wonder if that was a mistake.

I feel the pain as I am in the same boat as you. I have no idea why it isn't working properly. I was F***** piss about it. I bought two used board on amazon, both acting the same way. I think they are both Version 2.

I should get a new replacement this week. (new from newegg)

I will let you know with the new board

[Umisater]

Hi Philip, looking forward to see your review of the Pandaminer when it reaches you.
Am I correct to assume that this is an aggregator board / box for AMD GPUs up to 8 x GPUs?
 

yes it should have 8 mobile rx 480 gpus inside it.

this is almost certainly a data center /warehouse miner .

 a guy with power to spare and no room.

At 2000 usd it is fairly well priced

I just need to know software power sound heat stats  to know how good it is.

The mobile RX 480 should be more efficient than the normal RX 480, so the price should be high. I think the $2k price is competitive.

[GabryRox]

Well, it seems I am jinxed in my efforts to get a 6-GPU system up and running lol.  Granted, my first attempt was on an unproven X99 Mobo, so I am willing to take that as a learning experience but now I am having trouble getting past 4 GPUs on a ASRock BTC Pro mobo that I know for a fact there are probably 1,000's out there running 6 GPUs smoothly.

That's pretty much where I am with my 2 H81 Pro BTC, pass the 4 cards, it's nightmare. 4 is sometime fine, but I can't push the card. 3 seems to be fined with a lot of OC.

I run 4 on one and 2 on the other one.

Tested pretty much everything possible.

I'm getting a brand new one this week. I shall see.

Hmmm that's disheartening to hear.The thing I don't get is that there are probably 1000's of these boards running 6 GPUs worldwide and never seen anyone mention these issues on the youtube videos.  I mean, these boards are designed for mining and miners natural expect all 6 PCI slots to work fine, but seems like more and more problems popping up... could it be only with the R2.0 versions?  Anyway, I posted a thread to tech support in the ASRock forum querrying about the same 2 issues so I will pass along any info i get there if it works.  I also have a 2nd one that I havent even cracked the box on yet since I got 2 from Amazon when they first came back in stock about 5 weeks ago. Beginning to wonder if that was a mistake.

I feel the pain as I am in the same boat as you. I have no idea why it isn't working properly. I was F***** piss about it. I bought two used board on amazon, both acting the same way. I think they are both Version 2.

I should get a new replacement this week. (new from newegg)

I will let you know with the new board

So, I checked and I actually got both my BTC R2 mobos from NewEgg back in early Nov, not Amazon as I had previously stated.  I also got a notice from someone posting in the ASRock technical support forum that I should open an actual service ticket for these issues, so I just did that  couple hours ago. Fingers crossed but based on things I've seen in a few places, this really seems to be an issue with the R2 version since there are hundreds if not thousands of the original version of this mobo running 6 GPUs.

Out of curiosity, what kind of risers are you using on your rig(s)?  Aside from the x16 slot problem, I am now wondering of trying to hook up the 5th GPU via a ribbon riser instead of a powered USB riser.  I also thought about trying to plug #5 directly into x1 slot #6.  Not sure but I think there might be room since it is at the end of the mobo. not sure where my head was on that lol. obviously cannot plug into mobo since this is an x1 slot lol

I will post more info on these tests after trying them, as well as if i hear anything back from ASRock tech support.

[HerbPean]

Well, it seems I am jinxed in my efforts to get a 6-GPU system up and running lol.  Granted, my first attempt was on an unproven X99 Mobo, so I am willing to take that as a learning experience but now I am having trouble getting past 4 GPUs on a ASRock BTC Pro mobo that I know for a fact there are probably 1,000's out there running 6 GPUs smoothly.

That's pretty much where I am with my 2 H81 Pro BTC, pass the 4 cards, it's nightmare. 4 is sometime fine, but I can't push the card. 3 seems to be fined with a lot of OC.

I run 4 on one and 2 on the other one.

Tested pretty much everything possible.

I'm getting a brand new one this week. I shall see.

Hmmm that's disheartening to hear.The thing I don't get is that there are probably 1000's of these boards running 6 GPUs worldwide and never seen anyone mention these issues on the youtube videos.  I mean, these boards are designed for mining and miners natural expect all 6 PCI slots to work fine, but seems like more and more problems popping up... could it be only with the R2.0 versions?  Anyway, I posted a thread to tech support in the ASRock forum querrying about the same 2 issues so I will pass along any info i get there if it works.  I also have a 2nd one that I havent even cracked the box on yet since I got 2 from Amazon when they first came back in stock about 5 weeks ago. Beginning to wonder if that was a mistake.

I feel the pain as I am in the same boat as you. I have no idea why it isn't working properly. I was F***** piss about it. I bought two used board on amazon, both acting the same way. I think they are both Version 2.

I should get a new replacement this week. (new from newegg)

I will let you know with the new board

So, I checked and I actually got both my BTC R2 mobos from NewEgg back in early Nov, not Amazon as I had previously stated.  I also got a notice from someone posting in the ASRock technical support forum that I should open an actual service ticket for these issues, so I just did that  couple hours ago. Fingers crossed but based on things I've seen in a few places, this really seems to be an issue with the R2 version since there are hundreds if not thousands of the original version of this mobo running 6 GPUs.

Out of curiosity, what kind of risers are you using on your rig(s)?  Aside from the x16 slot problem, I am now wondering of trying to hook up the 5th GPU via a ribbon riser instead of a powered USB riser.  I also thought about trying to plug #5 directly into x1 slot #6.  Not sure but I think there might be room since it is at the end of the mobo. not sure where my head was on that lol. obviously cannot plug into mobo since this is an x1 slot lol

I will post more info on these tests after trying them, as well as if i hear anything back from ASRock tech support.

Powered (Molex/PCI-E) ribbon cable 1x-16x risers from Padrino

[citronick]

gabryrox -

I have many H81 BTC mobo with 6xGPU and 7xGPU configs with no problems.

In my case, I got my multi GPU tutorial from BBT - Bits Be Trippin.

You need to ensure that this particular mobo (v1 and V2) has the molex powered directly from PSU.

In addition, all GPUs need to have powered risers.

The errors you are getting, IMHO are power related issues... there just not enough power for 6 GPUs.

Also your PSU need to be large enough to cater for all 6 x GPUs plus you mobo, etc. with 20% to spare (good rule of thumb to ensure safe zone and also longevity of your PSU).

I had a few suppliers from China via AliExpress on the powered risers - ensure your get the version 3 with USB3 type - I have very little issues with those. Avoid the ribbon type risers because the solder works on those are back-alley quality and are a fire-hazard.

Best build for multi GPU is Windows 7 in my opinion, you may need to use the 6xGPU registry mod hack utility to get rid of the Error Code 43, but no rocket science, it's quite straightforward. If you want lazy shortcut and want Windows then just go for Win10 to get all 6xGPUs visible in Device Manager.

For mining (not gaming), 16x PCI is irrelevant, the USB risers are 1x (...4x ??) and enough to carry DATA between OS and the GPU. Unlike high end games, it will utilize the PCI bandwidth on all cylinders to use all the cool features of the GPU. In mining, a big chunk of the GPU's greatness is likely not used because mining need at best the core GPU cycles and the high speed memory. Thats why miners are modding the ROM and taking out the unnecessary stuff -- this ritual is popular in hard core mining.

Afternote:
While I have the multi-GPU config still in my mini-farm, all my new builds are riser-less on based on Biostar Z170 4xPCI slotters. Keeping it simple as possible.

[GabryRox]

gabryrox -

I have many H81 BTC mobo with 6xGPU and 7xGPU configs with no problems.

In my case, I got my multi GPU tutorial from BBT - Bits Be Trippin.

You need to ensure that this particular mobo (v1 and V2) has the molex powered directly from PSU.

In addition, all GPUs need to have powered risers.

The errors you are getting, IMHO are power related issues... there just not enough power for 6 GPUs.

Also your PSU need to be large enough to cater for all 6 x GPUs plus you mobo, etc. with 20% to spare (good rule of thumb to ensure safe zone and also longevity of your PSU).

I had a few suppliers from China via AliExpress on the powered risers - ensure your get the version 3 with USB3 type - I have very little issues with those. Avoid the ribbon type risers because the solder works on those are back-alley quality and are a fire-hazard.

Best build for multi GPU is Windows 7 in my opinion, you may need to use the 6xGPU registry mod hack utility to get rid of the Error Code 43, but no rocket science, it's quite straightforward. If you want lazy shortcut and want Windows then just go for Win10 to get all 6xGPUs visible in Device Manager.

For mining (not gaming), 16x PCI is irrelevant, the USB risers are 1x (...4x ??) and enough to carry DATA between OS and the GPU. Unlike high end games, it will utilize the PCI bandwidth on all cylinders to use all the cool features of the GPU. In mining, a big chunk of the GPU's greatness is likely not used because mining need at best the core GPU cycles and the high speed memory. Thats why miners are modding the ROM and taking out the unnecessary stuff -- this ritual is popular in hard core mining.

Afternote:
While I have the multi-GPU config still in my mini-farm, all my new builds are riser-less on based on Biostar Z170 4xPCI slotters. Keeping it simple as possible.

Thanks Citronik for the thoughtful and helpful information... i really appreciate it! I will respond to all your points as some i have done and some yet to do:

1- I do have the additional molex plug powering the mobo. I knew I would need to do this going in so after getting that message I think after installing GPU #2, I plugged that additional molex into the mobo.

2- I am using all powered USB risers at this point, in x1 slots 1, 2, 3 & 5. I got most of them from the same Amazon seller and didn't have any problems with 3 of them on rig #1 and the first 4 on this rig.  However, I do have 1-2 extra ones lying around, along with 3-4 additional USB-3 cables, so I imagine it's a good idea to try all of those before proceeding with further trouble-shooting.

3- My PSU is a Rosewill 1200W Quark Series Platinum.  With 4 GPUs running on Claymore ZEC miner V8, I am hitting total system wattage peaks in the 600-610W range. This includes the CPU/Fans/etc, which use about 60-70 watts, so even adding 2 more 470's would put me at just under 900W max... so, less than 75% of its total capacity.  Based on this, I don't believe it is a total power issue causing my problems (unless I am really missing something).

4- I'm already on W7 and would prefer to avoid W10 if possible, so I am considering that registry hack you mentioned.  I actually read about it over on the ZEC mining forum... at least I assume it is the one you are talking about.  Would you mind checking to see if this is the same one?

https://lbr.id.lv/6xgpu_mod/

Since this involved messing with the registry I don't want to take any chances, but if this is the same version you are talking about and you say it's relatively straight forward to implement, I will give it a shot.

Hoping/assuming this mod will solve the error 43 issue in slot #6, I still have that pesky issue with the lone x16 slot on this board.  Have you ever experienced anything like that?  (not being able to get past post with anything plugged into it via USB riser, including setting PCIe to Gen1 (from auto) in the BIOS).  Note that I tried to use this slot several times before getting my rig up to 4 GPUs, so I don't believe it's the number of GPU limit issue causing this problem.

I also read that some people have had success by turning off the on-board video in the BIOS. Not sure that was meant to fix this exact issue, but maybe it's worth a try?  Not sure exactly how to do that... will probably take me at least an hour to find as does most anything I try to find in the BIOS lol.

Thanks again for the tips... hoping to get this rig up to 5 GPUs soon, ideally in the x16 slot, so I feel comfortable enough that it will take 6 GPUs to buy the 6th.