yslyung
Legendary
Offline
Activity: 1500
Merit: 1002
Mine Mine Mine
|
|
November 13, 2016, 08:11:24 PM |
|
1 out 7 480s (4 GB) is hashing lower than others. Is there something that could be done to fix it? Not that I am complaining, it is hashing way higher than Claymore V4, just curious what is causing 1 GPU (dev6) to hash lower.
Assuming you run with --instances 2 (default), one of the 2 sa-solver processes may have crashed for this GPU. Does it go back up to 80+ sol/s after restarting silentarmy? Most of the time the GPU at this particular location start low across several rigs, the second GPU from the very last one. I am using the following bat c:\cygwin64\bin\python3.4m silentarmy --instances=1 -c stratum+tcp://zec.suprnova.cc:2142 -u hawkfish007.2H -p x --use 0,1,2,3,4,5,6 pause Should I change it to --instances=2 or 0? Thanks. i asked the same question earlier but no answers yet, i rolled back to earlier version & the particular slower gpu goes back to normal but overall mining speed is a tad slower compared to the newer version but total speed is abt the same although the particular gpu is slower because of increased hashrate from newer version. some other rigs works well no issue but on some others with the same setup & gpu make & model has this particular half speed. if you open up gpuz & montitor that gpu, it's not really working to full speed, looks like only 1 instance instead of 2. (default 1 is actually 2)
|
|
|
|
jakobito
Newbie
Offline
Activity: 7
Merit: 0
|
|
November 13, 2016, 08:44:12 PM |
|
Made a cuda port of actual Silentarmy 5 speeds sucks. 92 s/s on overclocked 1070(opencl version give near 100) Tested only on linux. If anyone want https://github.com/krnlx/nheqminertoo bad it dumped : ~/aaa/nheqminer/Linux_cmake/nheqminer_cuda_sa$ ./nheqminer_cuda_sa -l eu1-zcash.flypool.org:3333 -u t1M74VKHZDJnHwmwWiHUiMWkBkzgQW4VGeg -cv 0 -cs -cd 0 -t 0
==================== www.nicehash.com ==================== Equihash CPU&GPU Miner for NiceHash vSA5 cuda port by maztheman,krnlx Thanks to Zcash developers for providing base of the code. Special thanks to tromp, xenoncat, mbevand and eXtremal-ik7 for providing optimized CPU, CUDA and AMD equihash solvers. ==================== www.nicehash.com ====================
Setting log level to 2 [15:36:43][0x00007f8b99409780] Using SSE2: YES [15:36:43][0x00007f8b99409780] Using AVX: YES [15:36:43][0x00007f8b99409780] Using AVX2: NO [15:36:43][0x00007f8b96069700] stratum | Starting miner [15:36:43][0x00007f8b96069700] stratum | Connecting to stratum server eu1-zcash.flypool.org:3333 [15:36:43][0x00007f8b95868700] miner#0 | Starting thread #0 (CUDA-SILENTARMY) GRID K520 (#0) BLOCKS=56, THREADS=64 [15:36:43][0x00007f8b96069700] stratum | Connected! [15:36:43][0x00007f8b96069700] stratum | Subscribed to stratum server [15:36:43][0x00007f8b96069700] miner | Extranonce is d65d009971 [15:36:43][0x00007f8b96069700] stratum | Authorized worker t1M74VKHZDJnHwmwWiHUiMWkBkzgQW4VGeg [15:36:43][0x00007f8b96069700] stratum | Target set to 004189374bc6a7ef9db22d0e5604189374bc6a7ef9db22d0e5604189374bc6a7 [15:36:44][0x00007f8b96069700] stratum | Received new job #c1bc667ea1f4a9aea140 Segmentation fault (core dumped)
But it's not the fault of your port - it's the same with the plain nheqminer 0.4b and the cuda_tromp solver. maybe again bad luck with the old computing (30) version. Regards Try adding some flags in CMakeLists.txt for older compute capabilities 3.5 or 5.0. For 750Ti i solved it adding 5.0 flags: set(CUDA_NVCC_FLAGS ${CUDA_NVCC_FLAGS};; -gencode arch=compute_50,code=sm_50;-gencode arch=compute_52,code=sm_52; -gencode arch=compute_61,code=sm_61 ) afaik the compute version is detected and used - definitions to use 3.0 are in the CMakeList .. It still dumps - must be something different .. regards In krnlx repository the cmakelists.txt file has been modified. For 750ti cards i had to modify it. https://github.com/nicehash/nheqminer/blob/master/Linux_cmake/nheqminer_cuda_tromp/CMakeLists.txt, line 37: set(CUDA_NVCC_FLAGS ${CUDA_NVCC_FLAGS};; -gencode arch=compute_20,code=sm_21; -gencode arch=compute_30,code=sm_30; -gencode arch=compute_35,code=sm_35; -gencode arch=compute_50,code=sm_50; -gencode arch=compute_52,code=sm_52; -gencode arch=compute_61,code=sm_61 ) https://github.com/krnlx/nheqminer/blob/master/Linux_cmake/nheqminer_cuda_sa/CMakeLists.txt, line 37: set(CUDA_NVCC_FLAGS ${CUDA_NVCC_FLAGS};; -gencode arch=compute_52,code=sm_52; -gencode arch=compute_61,code=sm_61 )
|
|
|
|
adamvp
|
|
November 13, 2016, 08:50:51 PM |
|
what to o/c in rx 470 and rx 480 to get more s/s gpu or memory?
|
I am looking for signature campaign pm me
|
|
|
doktor83
|
|
November 13, 2016, 09:32:32 PM |
|
claymore did it again, time for payback
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
November 13, 2016, 09:43:55 PM Last edit: November 13, 2016, 09:55:04 PM by toptek |
|
claymore did it again, time for payback
did what i haven't followed him sense this went windows .nm I see v5 i guess it's faster I'll won't comment on, i keep it to my self let some one else go there . but at 2.5 % fee hint ,!!! wow one 470 Total Speed: 115.515 H/s, Total Shares: 3, Rejected: 0, Time: 00:00
|
|
|
|
doktor83
|
|
November 13, 2016, 09:54:15 PM |
|
my old 270 (not X) card give almost 60 sol/s. r9 380 4gb is about 72 sol/s hugeeeee improvement. mrb and guys, do your magic
|
|
|
|
sp_
Legendary
Offline
Activity: 2926
Merit: 1087
Team Black developer
|
|
November 13, 2016, 09:54:26 PM |
|
With modded straps (claymore 5.0a):
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
November 13, 2016, 09:59:14 PM Last edit: November 13, 2016, 10:23:28 PM by toptek |
|
my old 270 (not X) card give almost 60 sol/s. r9 380 4gb is about 72 sol/s hugeeeee improvement. mrb and guys, do your magic they will i think there all ready working it from one of the post but it might be a while i sure hope Zec mining stays for long while with all the hard work every one is putting in to it .
|
|
|
|
nerdralph
|
|
November 13, 2016, 10:24:16 PM |
|
With the Linux binary releases I make I also included a "mine" script that will mine to my mph account. I just checked the balance, and it's .0035 ZEC, or ~42c. Who says open-source software work doesn't pay. :-)
|
|
|
|
laik2
|
|
November 13, 2016, 10:28:36 PM |
|
With the Linux binary releases I make I also included a "mine" script that will mine to my mph account. I just checked the balance, and it's .0035 ZEC, or ~42c. Who says open-source software work doesn't pay. :-)
I'm mining with single core to mrb's account for a few days, post your address and I'll put another core for yours
|
|
|
|
anatolikostis
Legendary
Offline
Activity: 2026
Merit: 1005
|
|
November 13, 2016, 10:34:28 PM |
|
With modded straps (claymore 5.0a): this is nothing without gpu MHz 1150-1200 or more?
|
|
|
|
qwep1
|
|
November 13, 2016, 10:35:42 PM |
|
With modded straps (claymore 5.0a): this is nothing without gpu MHz 1150-1200 o more?
|
|
|
|
nerdralph
|
|
November 13, 2016, 10:45:07 PM |
|
With the Linux binary releases I make I also included a "mine" script that will mine to my mph account. I just checked the balance, and it's .0035 ZEC, or ~42c. Who says open-source software work doesn't pay. :-)
I'm mining with single core to mrb's account for a few days, post your address and I'll put another core for yours 'nerdralph' is my miningpoolhub account, or with a different pool use: t1MaD62DS2bbzxCuZHnkB8g5Yc2wbeT1g9z Thanks in advance. Not that I need the money, but it's nice to know when someone likes the work enough to make a small donation.
|
|
|
|
jk_14
Legendary
Offline
Activity: 1292
Merit: 1000
|
|
November 13, 2016, 10:46:07 PM |
|
Hi, mrb
Could you implement some very usefull, ccminer-like option: -S --syslog
-S, --syslog use system log for output messages
that would be nice for KopiemTu support, i.e. for monitoring
It's low priority, but I will consider it. In the mean time I am happy to accept patches from contributors. Ok, that is my patch, then root@kopiemtu:~# diff /opt/miners/silentarmy/silentarmy silentarmy.orig 13d12 < import syslog 266,271c265 < < if self.opts.syslog: < syslog.syslog("Total %s sol/s [%s] %d share%s" % \ < (rate_avg, info_gpus, shares, '' if shares == 1 else 's')) < else: < print("Total %s sol/s [%s] %d share%s" % \ --- > print("Total %s sol/s [%s] %d share%s" % \ 273c267 < sys.stdout.flush() --- > sys.stdout.flush() 401,402d394 < if self.opts.syslog: < print('\nNow logging to syslog...') 404,405d395 < < 566,569d555 < parser.add_option( < "--syslog", < dest="syslog", action="store_true", < help="use system log for output messages") root@kopiemtu:~#
whole modified file: http://www.mbl.cash/silentarmyPlease apply it, thanks! I have KopiemTu monitoring done for your miner (a bit of testing now) In case you would expand the shares printout, please keep the format: 99/100 (99.00%) Thanks in advance.
|
|
|
|
laik2
|
|
November 13, 2016, 10:48:23 PM |
|
With the Linux binary releases I make I also included a "mine" script that will mine to my mph account. I just checked the balance, and it's .0035 ZEC, or ~42c. Who says open-source software work doesn't pay. :-)
I'm mining with single core to mrb's account for a few days, post your address and I'll put another core for yours 'nerdralph' is my miningpoolhub account, or with a different pool use: t1MaD62DS2bbzxCuZHnkB8g5Yc2wbeT1g9z Thanks in advance. Not that I need the money, but it's nice to know when someone likes the work enough to make a small donation. cpuminer -l eu1-zcash.flypool.org:3333 -u t1MaD62DS2bbzxCuZHnkB8g5Yc2wbeT1g9z.laik2 -t 1 Done
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
November 13, 2016, 10:55:15 PM |
|
Just put 2 more RX480 and started getting this: [ 327.726578] VM fault (0x02, vmid 2) at page 1641426, read from 'TC4' (0x54433400) (72) [ 327.726582] amdgpu 0000:03:00.0: GPU fault detected: 147 0x07c84802 [ 327.726597] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001A82F1 [ 327.726613] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002 [ 327.726629] VM fault (0x02, vmid 2) at page 1737457, read from 'TC4' (0x54433400) (72) [ 327.726634] amdgpu 0000:03:00.0: GPU fault detected: 147 0x01484802 [ 327.726648] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x0017865A [ 327.726664] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002 [ 327.726680] VM fault (0x02, vmid 2) at page 1541722, read from 'TC4' (0x54433400) (72) [ 327.726684] amdgpu 0000:03:00.0: GPU fault detected: 147 0x08304802 [ 327.727325] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001BCEF3 [ 327.727865] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002 [ 327.728406] VM fault (0x02, vmid 2) at page 1822451, read from 'TC4' (0x54433400) (72) [ 327.728411] amdgpu 0000:03:00.0: GPU fault detected: 147 0x07d04802 [ 327.728943] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001B280A [ 327.729472] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04044002 [ 327.729998] VM fault (0x02, vmid 2) at page 1779722, read from 'TC5' (0x54433500) (68) I've installed some old powered PCIe risers which are non usb/nor original asrocks but cards are recognized. Additional power to the motherboard H81 Pro BTC is not installed...may that be the problem? It's not so often but a few times every 10mins... and mostly doesn't seem to stop mining unless it completely freezes. ASROCK STATES THAT THE TWO MOLEX POWER CONNECTIONS MUST BE USED-- The auxilliary mollex power connecters are not an option, according to the manual. I know board chat goes either way, but non-powered ribbon risers are dangerous and flammable. --scryptr
|
|
|
|
joblo
Legendary
Offline
Activity: 1470
Merit: 1114
|
|
November 13, 2016, 11:31:26 PM |
|
Just put 2 more RX480 and started getting this: [ 327.726578] VM fault (0x02, vmid 2) at page 1641426, read from 'TC4' (0x54433400) (72) [ 327.726582] amdgpu 0000:03:00.0: GPU fault detected: 147 0x07c84802 [ 327.726597] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001A82F1 [ 327.726613] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002 [ 327.726629] VM fault (0x02, vmid 2) at page 1737457, read from 'TC4' (0x54433400) (72) [ 327.726634] amdgpu 0000:03:00.0: GPU fault detected: 147 0x01484802 [ 327.726648] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x0017865A [ 327.726664] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002 [ 327.726680] VM fault (0x02, vmid 2) at page 1541722, read from 'TC4' (0x54433400) (72) [ 327.726684] amdgpu 0000:03:00.0: GPU fault detected: 147 0x08304802 [ 327.727325] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001BCEF3 [ 327.727865] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002 [ 327.728406] VM fault (0x02, vmid 2) at page 1822451, read from 'TC4' (0x54433400) (72) [ 327.728411] amdgpu 0000:03:00.0: GPU fault detected: 147 0x07d04802 [ 327.728943] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001B280A [ 327.729472] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04044002 [ 327.729998] VM fault (0x02, vmid 2) at page 1779722, read from 'TC5' (0x54433500) (68) I've installed some old powered PCIe risers which are non usb/nor original asrocks but cards are recognized. Additional power to the motherboard H81 Pro BTC is not installed...may that be the problem? It's not so often but a few times every 10mins... and mostly doesn't seem to stop mining unless it completely freezes. ASROCK STATES THAT THE TWO MOLEX POWER CONNECTIONS MUST BE USED-- The auxilliary mollex power connecters are not an option, according to the manual. I know board chat goes either way, but non-powered ribbon risers are dangerous and flammable. --scryptr The on board power connectors shouldn't be an issue because powered risers don't draw any power from the mobo. It doesn't mean it's not a power issue. If your PSU is multi rail make sure the distribution is balanced. Is it same GPU every time? Intermittant nature suggests a bad connection, ie bad riser.
|
|
|
|
nrg_wolf
Legendary
Offline
Activity: 882
Merit: 1000
|
|
November 13, 2016, 11:32:21 PM |
|
only 30sols on a 1060, does not seem right. what are others getting?
|
|
|
|
Stealth8368
|
|
November 13, 2016, 11:36:34 PM |
|
If open source mining software is going to work and keep up with other fee paying mining software we must show support,I suggest with next release everyone mines to the developers zcash address for first hour at lest and show support for the great work.
|
|
|
|
laik2
|
|
November 13, 2016, 11:48:04 PM |
|
Just put 2 more RX480 and started getting this: [ 327.726578] VM fault (0x02, vmid 2) at page 1641426, read from 'TC4' (0x54433400) (72) [ 327.726582] amdgpu 0000:03:00.0: GPU fault detected: 147 0x07c84802 [ 327.726597] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001A82F1 [ 327.726613] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002 [ 327.726629] VM fault (0x02, vmid 2) at page 1737457, read from 'TC4' (0x54433400) (72) [ 327.726634] amdgpu 0000:03:00.0: GPU fault detected: 147 0x01484802 [ 327.726648] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x0017865A [ 327.726664] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002 [ 327.726680] VM fault (0x02, vmid 2) at page 1541722, read from 'TC4' (0x54433400) (72) [ 327.726684] amdgpu 0000:03:00.0: GPU fault detected: 147 0x08304802 [ 327.727325] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001BCEF3 [ 327.727865] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04048002 [ 327.728406] VM fault (0x02, vmid 2) at page 1822451, read from 'TC4' (0x54433400) (72) [ 327.728411] amdgpu 0000:03:00.0: GPU fault detected: 147 0x07d04802 [ 327.728943] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x001B280A [ 327.729472] amdgpu 0000:03:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04044002 [ 327.729998] VM fault (0x02, vmid 2) at page 1779722, read from 'TC5' (0x54433500) (68) I've installed some old powered PCIe risers which are non usb/nor original asrocks but cards are recognized. Additional power to the motherboard H81 Pro BTC is not installed...may that be the problem? It's not so often but a few times every 10mins... and mostly doesn't seem to stop mining unless it completely freezes. ASROCK STATES THAT THE TWO MOLEX POWER CONNECTIONS MUST BE USED-- The auxilliary mollex power connecters are not an option, according to the manual. I know board chat goes either way, but non-powered ribbon risers are dangerous and flammable. --scryptr The on board power connectors shouldn't be an issue because powered risers don't draw any power from the mobo. It doesn't mean it's not a power issue. If your PSU is multi rail make sure the distribution is balanced. Is it same GPU every time? Intermittant nature suggests a bad connection, ie bad riser. Bad riser...both risers I found do that...some old shitty risers...damn cards came before new risers and I can't use my brand new rx480s...
|
|
|
|
|