bigjme
|
|
March 21, 2014, 09:14:34 AM |
|
I have to find a 5 m cable first... and i will write back
thank you, this would save me a LOT of money if they work fine with them Sadly i can confirm it doesn`t work with 5m cable , it is not detected by the board at all. I can`t sort out why is cudaminer using 50% cpu even with -H 2 , reinstalled driver restarted , but nothing helps , any ideas? The cpu is intel Celeron 2900mhz G1820 Thanks. Looks like I'm going go have to spend another £300 then :-(
|
Owner of: cudamining.co.uk
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
AizenSou
|
|
March 21, 2014, 09:41:28 AM |
|
why not just use AsRock H81 Pro BTC? built for mining. I have it, and it works without problems under ubuntu 13.10
For Intel there are a few. For amd not so many. Do you have x1 risers connected into your x16 slots to run 6?
More to the point, is it x1 usb risers or x16 to x16 ribbons?
before I bought the H81, I also wanted to go with a AMD cpu. However, the price of the H81 is perfect, it works good and offers a lot. The whole rig (celeron cpu & 5 x 750Ti) only pulls 240Watt from the wall (according to my kill-a-watt), so maybe you want to think about going with AMD again. If you build 20 rigs, you can save A LOT of money (just by going with the cheap H81)! Cpu farm, I believe Intel is the way, just on power saving. I have seen 7 cards being run on a msi gd65 motherboard.
The other Intel one is Haswell only, pretty cheap to set up, low power overheads. And will support 6 gpus and may allow for you to use the on aboard so all gpus run at full power
I have seriously considered that but I read from reddit that alot of people having problem with this board under Linux to get the 6 cards working. Have you tried the 6. card in your board under ubuntu 13.10, bigjme?
|
|
|
|
old_pioner
|
|
March 21, 2014, 09:47:47 AM Last edit: March 21, 2014, 10:01:35 AM by old_pioner |
|
|
|
|
|
bigjme
|
|
March 21, 2014, 10:05:35 AM |
|
Lmao, if your willing to try it ;-) why not just use AsRock H81 Pro BTC? built for mining. I have it, and it works without problems under ubuntu 13.10
For Intel there are a few. For amd not so many. Do you have x1 risers connected into your x16 slots to run 6?
More to the point, is it x1 usb risers or x16 to x16 ribbons?
before I bought the H81, I also wanted to go with a AMD cpu. However, the price of the H81 is perfect, it works good and offers a lot. The whole rig (celeron cpu & 5 x 750Ti) only pulls 240Watt from the wall (according to my kill-a-watt), so maybe you want to think about going with AMD again. If you build 20 rigs, you can save A LOT of money (just by going with the cheap H81)! Cpu farm, I believe Intel is the way, just on power saving. I have seen 7 cards being run on a msi gd65 motherboard.
The other Intel one is Haswell only, pretty cheap to set up, low power overheads. And will support 6 gpus and may allow for you to use the on aboard so all gpus run at full power
I have seriously considered that but I read from reddit that alot of people having problem with this board under Linux to get the 6 cards working. Have you tried the 6. card in your board under ubuntu 13.10, bigjme? Sadly I'm still stuck with just my 780 after finding out about the usb cables not working at such long lengths. So I can't be much help on that, sorry
|
Owner of: cudamining.co.uk
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
March 21, 2014, 10:06:05 AM |
|
except it is a USB 3 converter which would be needed... Why not moving the whole pc away (near where you plan to put the cards) and buy and long monitor cable ?
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
bigjme
|
|
March 21, 2014, 10:08:56 AM |
|
except it is a USB 3 converter which would be needed... Why not moving the whole pc away (near where you plan to put the cards) and buy and long monitor cable ?
It's more of an issue of space, if it were a normal case then maybe ;-) I may be able to spin the case round and a 2m might just reach.... hmm Ooh and here's a usb 3 version http://www.amazon.co.uk/gp/aw/d/B0095EFXMC
|
Owner of: cudamining.co.uk
|
|
|
old_pioner
|
|
March 21, 2014, 10:24:49 AM |
|
Lmao, if your willing to try it ;-)
I can't putin took all my money Wrong item, it's usb lan card
|
|
|
|
chup
Sr. Member
Offline
Activity: 736
Merit: 262
Me, Myself & I
|
|
March 21, 2014, 10:57:22 AM |
|
PS: on another PC eveything works flawlessly.... after copy&paste of config files.... go figure :S
Assuming firewall or some internet security sw interfering. Try disabling them to check is it working without, if yes than configure passing of needed ports.
|
|
|
|
ltcnim
Legendary
Offline
Activity: 914
Merit: 1001
|
|
March 21, 2014, 11:46:07 AM |
|
just for the record: I recompiled ccminer under ubuntu server 13.10 using -arch=sm_35 --maxrregcount=128 and my khash for heavycoin went from ~19100khash max. to ~21500khash. power usage stayed the same. pretty nice improvement, thx again Christian!
Edit: 5 x 750Ti EVGA SC
|
|
|
|
jack80
|
|
March 21, 2014, 11:56:28 AM Last edit: March 21, 2014, 01:04:14 PM by jack80 |
|
I want new cudaminer for windows boost for 750ti Now! .
|
|
|
|
vaulter
|
|
March 21, 2014, 12:14:12 PM |
|
Please you run a cudaminer with 1 only 750 palit card and post image your kh/s . No Overclock . Use Litecoin for test . This is my palit NE5X75TS1341-1073F work on coinotron no overclock mine LTC : http://www.palit.biz/palit/vgapro.php?id=2253 This is the same card, Palit GTX750Ti STORMX OC I don't know why it works worse with the script. I tried the driver also 335 and -l T10x24 Probably cheap ver. 1200/1600 +20kh only and 1200/1700 get blue screen cudaminer.exe -q -l T5x24 -d gtx750ti -i 0 -m 1 -L 2 -H 2 -o stratum+tcp://gigahash.wemineltc.com:3333 -O u:p *** CudaMiner for nVidia GPUs by Christian Buchner *** This is version 2014-02-28 (beta) based on pooler-cpuminer 2.3.2 (c) 2010 Jeff Garzik, 2012 pooler Cuda additions Copyright 2013,2014 Christian Buchner LTC donation address: LKS1WDKGED647msBQfLBHV3Ls8sveGncnm BTC donation address: 16hJF5mceSojnTD3ZTUDqdRhDyPJzoRakM YAC donation address: Y87sptDEcpLkLeAuex6qZioDbvy1qXZEj4 [2014-03-20 22:23:13] Starting Stratum on stratum+tcp://gigahash.wemineltc.com:3 333 [2014-03-20 22:23:13] 1 miner threads started, using 'scrypt' algorithm. [2014-03-20 22:23:15] GPU #0: GeForce GTX 750 Ti with compute capability 5.0 [2014-03-20 22:23:15] GPU #0: interactive: 0, tex-cache: 0 , single-alloc: 1 [2014-03-20 22:23:15] GPU #0: 32 hashes / 2.0 MB per warp. [2014-03-20 22:23:15] GPU #0: using launch configuration T5x24 [2014-03-20 22:23:49] accepted: 1/1 (100.00%), 199.59 khash/s (yay!!!) [2014-03-20 22:24:09] accepted: 2/2 (100.00%), 202.16 khash/s (yay!!!) [2014-03-20 22:26:15] accepted: 3/3 (100.00%), 201.14 khash/s (yay!!!) [2014-03-20 22:27:10] accepted: 4/4 (100.00%), 202.01 khash/s (yay!!!) [2014-03-20 22:27:35] accepted: 5/5 (100.00%), 201.80 khash/s (yay!!!) [2014-03-20 22:27:38] accepted: 6/6 (100.00%), 199.23 khash/s (yay!!!) [2014-03-20 22:27:48] accepted: 7/7 (100.00%), 197.74 khash/s (yay!!!) [2014-03-20 22:28:47] accepted: 8/8 (100.00%), 171.93 khash/s (yay!!!) [2014-03-20 22:28:50] accepted: 9/9 (100.00%), 199.65 khash/s (yay!!!) [2014-03-20 22:29:17] accepted: 10/10 (100.00%), 201.51 khash/s (yay!! I have both Palit GTX750 StomX and Palit StormX GTX750Ti - rate is 280 kh/s with +90 core +200 memory for gtx750ti (6 cards ~1680 Khs) with Asrock H61 and USB3 risers as for gtx750 it is 250 Khs stock (but I didnt try it with USB riser and I only have 1 board yet)
|
|
|
|
AizenSou
|
|
March 21, 2014, 12:18:00 PM |
|
I just give up to test different boards to work with Linux and 6x750Tis. Such a headache. I stay with my configuration of GA-990FXA-UD3 boards with AMD-FX6300 and a bunch of 750Tis. It works flawless with Linux. Btw, bigjme I will have a lot of this riser soon. I could sell you back with the same price. Shipping from Germany. If you have interest just pm me. http://www.ebay.de/itm/PCIe-PCI-e-PCI-Express-USB-3-0-Riser-Kabel-Extender-Cable-Card-1x-zu-16x-/251461599003?pt=DE_Computer_Sonstige&hash=item3a8c477f1bjust for the record: I recompiled ccminer under ubuntu server 13.10 using -arch=sm_35 --maxrregcount=128 and my khash for heavycoin went from ~19100khash max. to ~21500khash. power usage stayed the same. pretty nice improvement, thx again Christian!
Edit: 5 x 750Ti EVGA SC
Why people still mining HVC with this difficulty? Its no longer profitable.
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
March 21, 2014, 12:26:55 PM |
|
Why people still mining HVC with this difficulty? Its no longer profitable.
Was asking to myself the same question...
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
bigjme
|
|
March 21, 2014, 12:48:10 PM |
|
I can get them for just over 10Euro's in the uk, sorry
|
Owner of: cudamining.co.uk
|
|
|
ltcnim
Legendary
Offline
Activity: 914
Merit: 1001
|
|
March 21, 2014, 12:49:43 PM |
|
I just give up to test different boards to work with Linux and 6x750Tis. Such a headache. I stay with my configuration of GA-990FXA-UD3 boards with AMD-FX6300 and a bunch of 750Tis. It works flawless with Linux. Btw, bigjme I will have a lot of this riser soon. I could sell you back with the same price. Shipping from Germany. If you have interest just pm me. http://www.ebay.de/itm/PCIe-PCI-e-PCI-Express-USB-3-0-Riser-Kabel-Extender-Cable-Card-1x-zu-16x-/251461599003?pt=DE_Computer_Sonstige&hash=item3a8c477f1bjust for the record: I recompiled ccminer under ubuntu server 13.10 using -arch=sm_35 --maxrregcount=128 and my khash for heavycoin went from ~19100khash max. to ~21500khash. power usage stayed the same. pretty nice improvement, thx again Christian!
Edit: 5 x 750Ti EVGA SC
Why people still mining HVC with this difficulty? Its no longer profitable. well, since my rig is brand new, I wanted to test it out on different algorythms. But if you have a suggestion what else I could mine - I'm open for it ^^
|
|
|
|
bigjme
|
|
March 21, 2014, 12:51:57 PM |
|
may sound daft, but is it just me or has bitcoins value dropped by over $40 in the last 2 days? even with Mt.Gox finding 200,000 lost bitcoins?
|
Owner of: cudamining.co.uk
|
|
|
jack80
|
|
March 21, 2014, 01:02:55 PM |
|
Im go back a LTC .
What can we now to undermine profitable ?
Which coin is worth our Kh/s ? .
|
|
|
|
EtBIM
Member
Offline
Activity: 83
Merit: 10
|
|
March 21, 2014, 01:06:24 PM |
|
Why people still mining HVC with this difficulty? Its no longer profitable.
Well according to this calculator, http://agran.net/fuguecoin_calc.php, with my GTX 770 hashing 130 MH/s i should earn 0.0106 BTC/day if i can sell them at 0.000039. That's pretty huge to me. I have found 3 blocks soloing overnight. That's more than double that i can expect with any other coin than i know of.
|
BTC: 1PoM7Us1VwPAfULsyTcwjqAeZMjRwiokB4
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
March 21, 2014, 01:17:13 PM |
|
[/s] Im go back a LTC .
What can we now to undermine profitable ?
Which coin is worth our Kh/s ? .
I wonder... My choice of coin hasn't been really good lately: *exe: to the moon bottom of their gravity well (but hey that's the way gravity works...) *bitleu: no exchange but some pools and high hope *fugue: one exchange but no pool and clearly not profitable through mining *rhinohorn: no pool no exchange (from the wallet only)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
D4rkAng3l
Member
Offline
Activity: 112
Merit: 10
|
|
March 21, 2014, 01:23:18 PM |
|
Hello to everybody,
are there a way to set CudaMiner to don't use all the GPU power ? (I prefer don't warm to much the laptop)
Tnx
|
|
|
|
|