[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX]

[renegadepcsolutions]

quick... while I'm ahead, please tell me how to get ccminer (tsiv cn edition) to work on Amazon EC2 g2.2xlarge! LOL

I've installed all the pre-reqs... but even though I installed Visual C++ 2010, it still gives me missing msvcp100.dll... dafuq?

how much does it cost to watch his program crashing ?
(I think it would be a lot easier, if ccminer was built with static library for that purpose)

Not too much. like... 10-15 cents per hour. Canceled it though... can't get ccminer to read the cuda driver... at all.

[Amph]

i compiled the last update of djm, took me 20 minutes, really long compiling

https://mega.co.nz/#!8AMnjSiL!ksUru2G5fOYTeDPvL-hwStr_utlUnC-ST0hvUFHensE

Thanks, Amph.  On my 750 Ti's I'm seeing a jump from about 1100 to a bit over 1400 with this new compile.

you should tnx djm34, i just compiled it

the last update require -a x15 not -a x13

1400per 750ti should be about right

x11 2700, x13 2000, x15 1400

[bigjme]

Amph did you compile the cleaned up version? I had the old old version before any code clean up. I want to make sure my pc wasnt just taking the pee. If so my upgrade may come sooner

[djm34]

i compiled the last update of djm, took me 20 minutes, really long compiling

https://mega.co.nz/#!8AMnjSiL!ksUru2G5fOYTeDPvL-hwStr_utlUnC-ST0hvUFHensE

Thanks, Amph.  On my 750 Ti's I'm seeing a jump from about 1100 to a bit over 1400 with this new compile.

you should tnx djm34, i just compiled it

the last update require -a x15 not -a x13

1400per 750ti should be about right

x11 2700, x13 2000, x15 1400

with 20min, you hold the world record for now  

[bigjme]

i know. Im gutted. Thats it, pc upgrade is going to have to happen sooner then expected! Lmao

[djm34]

i know. Im gutted. Thats it, pc upgrade is going to have to happen sooner then expected! Lmao

May-be nvidia should think about making their compiler working over the gpu...   

[Amph]

i compiled the last update of djm, took me 20 minutes, really long compiling

https://mega.co.nz/#!8AMnjSiL!ksUru2G5fOYTeDPvL-hwStr_utlUnC-ST0hvUFHensE

Thanks, Amph.  On my 750 Ti's I'm seeing a jump from about 1100 to a bit over 1400 with this new compile.

you should tnx djm34, i just compiled it

the last update require -a x15 not -a x13

1400per 750ti should be about right

x11 2700, x13 2000, x15 1400

with 20min, you hold the world record for now  

my haswell OC'ed to 4400 does pretty well, or it depend of other things? ram 8gb only

[Neo.op]

quick... while I'm ahead, please tell me how to get ccminer (tsiv cn edition) to work on Amazon EC2 g2.2xlarge! LOL

I've installed all the pre-reqs... but even though I installed Visual C++ 2010, it still gives me missing msvcp100.dll... dafuq?

how much does it cost to watch his program crashing ?
(I think it would be a lot easier, if ccminer was built with static library for that purpose)

Not too much. like... 10-15 cents per hour. Canceled it though... can't get ccminer to read the cuda driver... at all.

Even you did, it wont help you much. The current speed on the miner is around 90-80h/s

[Amph]

https://bitcointalk.org/index.php?topic=668848.0

djm34 another work for you, lol

btw where in the code you changed -a x13 for -a x15?

perhaps this?

Code:

extern int scanhash_x15(int thr_id, uint32_t *pdata,
	const uint32_t *ptarget, uint32_t max_nonce,
	unsigned long *hashes_done);

[Perl++]

I installed the last nvidia driver and ccminer x15 still not working on my GTX690

[djm34]

I installed the last nvidia driver and ccminer x15 still not working on my GTX690

What was the latest release which worked for you ?

[djm34]

https://bitcointalk.org/index.php?topic=668848.0

djm34 another work for you, lol

btw where in the code you changed -a x13 for -a x15?

perhaps this?

Code:

extern int scanhash_x15(int thr_id, uint32_t *pdata,
	const uint32_t *ptarget, uint32_t max_nonce,
	unsigned long *hashes_done);

lose lose, djb2 ? (I think I will have a look at x22 first  )
-a x13, it is in the main routine (cpu-miner.c, if I remember well... )

[GES]

how many gives out gtx 780 on JackpotCoin?

[Perl++]

I installed the last nvidia driver and ccminer x15 still not working on my GTX690

What was the latest release which worked for you ?

ccminer v1.2

[djm34]

I installed the last nvidia driver and ccminer x15 still not working on my GTX690

What was the latest release which worked for you ?

ccminer v1.2

that's strange, it is made from v1.2 (the latest one), at least x13 should work... (as there is no change outside x15 )
Can you check x13 work on v1.2 ?

[cbuchner1]

I installed the last nvidia driver and ccminer x15 still not working on my GTX690

What was the latest release which worked for you ?

ccminer v1.2

that's strange, it is made from v1.2 (the latest one), at least x13 should work... (as there is no change outside x15 )
Can you check x13 work on v1.2 ?

maybe you built the unofficial release against CUDA 6.0 which up's the minimum driver version requirement

[Perl++]

I installed the last nvidia driver and ccminer x15 still not working on my GTX690

What was the latest release which worked for you ?

ccminer v1.2

that's strange, it is made from v1.2 (the latest one), at least x13 should work... (as there is no change outside x15 )
Can you check x13 work on v1.2 ?

x13 work fine.

[Bombadil]

that profit calculator is sketchy at best..call out one coin as good then you move to that coin and come back and it no where near the same report as a last time
Posted from Bitcointa.lk - #r327nMMo5XkF7uj8

If that's the answer you're gonna give to everyone, well, then fuck any development on my calc But I'm not pessimistic, screw you, I'll make it for everyone else (been working for it for hours this night, fixing cryptsy, electricity cost, using XMR pools for diff and reward, etc... but your answer fucked me up, so it has to wait now )
1) It's clearly stated as beta/pre-release, and 2) it gathers all the info from the nice checkboxes on top. If you did some research first, you'd see that WhatToMine is the ONLY api that has JPC/TAC difficulty and reward, so contact them if you want it corrected or uncheck it and get a CoinTweak/CoinWarz API key
And 3) Yeah, profitability of a coin can move VERY VERY FAST. Even faster than trade prices. If you don't know that already, well, get out of trying to mine the most profitable coin My app gets real live market data so, yeah, everytime someone changes his top buy orders, the profitability of a coin changes a lot.

Peace ^^

[cayars]

profit calculator block reward are showing incorrect value for talkcoin and JPC.

which profit calc? Online or Bomb's version?

Well, that took longer than I wanted. Finally finished restructuring the hash into smaller, sequentially launched kernels. Mainly a preparatory step for throwing in more threads per hash for certain parts of the algorithm, but it might alleviate the TDR problems a little.

Spent probably one evening on the actual work, next two debugging because I forgot to copy the keccak tables into device memory in the new split core/extra init...

Got a source release?

Anyone aware of the Nvidia beta driver 340.43.....I'm not a programmer but I read somewhere that the new driver is highly utilizing sha256? Am I taking that the wrong way or.....possibilities....btw it was release on june 17th....maybe some of you wizards already know this, but thought worth a mention

I installed it on 4 different machines to try and didn't notice anything problems, slow downs or speedups.  Pretty much a non-even.

[djm34]

I installed the last nvidia driver and ccminer x15 still not working on my GTX690

What was the latest release which worked for you ?

ccminer v1.2

that's strange, it is made from v1.2 (the latest one), at least x13 should work... (as there is no change outside x15 )
Can you check x13 work on v1.2 ?

maybe you built the unofficial release against CUDA 6.0 which up's the minimum driver version requirement

I don't have cuda 6.0... may-be Amph did it  (yeah... 20min was really too fast)