[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX]

[valth]

not sure whether ccminer for fresh version not working properly or pool not working.

Pool showing less than 1 mh. Something like 80 kh per 750ti

pool not working properly
it shown mine as 1.4 Gh for 4 750ti

[Equitum]

not sure whether ccminer for fresh version not working properly or pool not working.

Pool showing less than 1 mh. Something like 80 kh per 750ti

pool not working properly
it shown mine as 1.4 Gh for 4 750ti

Solo-mining seems to be working fine in terms of the rate of shares being submitted, unlike with the pools.
The problem I'm having is that the fresh-ccminer only submits what seems to be one share a minute, or a share as soon as a new block is detected, and most of those shares (if not all) aren't accepted.

[e6ug]

can you guys give me an example .bat for fresh on a pool? thanks

[yellowduck2]

not sure whether ccminer for fresh version not working properly or pool not working.

Pool showing less than 1 mh. Something like 80 kh per 750ti

pool not working properly
it shown mine as 1.4 Gh for 4 750ti

Solo-mining seems to be working fine in terms of the rate of shares being submitted, unlike with the pools.
The problem I'm having is that the fresh-ccminer only submits what seems to be one share a minute, or a share as soon as a new block is detected, and most of those shares (if not all) aren't accepted.

That could explain why it only show 80 kh on pool.

[Amph]

not sure whether ccminer for fresh version not working properly or pool not working.

Pool showing less than 1 mh. Something like 80 kh per 750ti

pool not working properly
it shown mine as 1.4 Gh for 4 750ti

don't work for me no yay no booo

[Equitum]

Finally getting accepted shares on hashharder after they adjusted their difficulty expectations.

https://i.imgur.com/ObOzsxd.jpg

[valth]

not sure whether ccminer for fresh version not working properly or pool not working.

Pool showing less than 1 mh. Something like 80 kh per 750ti

pool not working properly
it shown mine as 1.4 Gh for 4 750ti

don't work for me no yay no booo

I am on Hashharder. It's working fine although got occasional stratum_recv_line failed

[Bombadil]

not sure whether ccminer for fresh version not working properly or pool not working.

Pool showing less than 1 mh. Something like 80 kh per 750ti

pool not working properly
it shown mine as 1.4 Gh for 4 750ti

don't work for me no yay no booo

It works for me on hashharder.


They even lowered the diff a bit now, it looks even better ATM

[Amph]

not sure whether ccminer for fresh version not working properly or pool not working.

Pool showing less than 1 mh. Something like 80 kh per 750ti

pool not working properly
it shown mine as 1.4 Gh for 4 750ti

don't work for me no yay no booo

It works for me on hashharder.


They even lowered the diff a bit now, it looks even better ATM

i compiled it from here https://github.com/savale/ccminer, it should work right?

[Equitum]

Try using -f 256 on suprnova. -f 32 on hashharder seems to also smooth out the shares a bit.

Edit: Seems that hashharder might be having issues, even if shares show as accepted in ccminer. I would stick to suprnova for the time being, as the expected payouts with -f 256 are much higher, and the pool-reported hashrate is much more accurate (reflecting a more accurate sharerate).

[djm34]

Try using -f 256 on suprnova. -f 32 on hashharder seems to also smooth out the shares a bit.

Edit: Seems that hashharder might be having issues, even if shares show as accepted in ccminer. I would stick to suprnova for the time being, as the expected payouts with -f 256 are much higher, and the pool-reported hashrate is much more accurate (reflecting a more accurate sharerate).

-f 256 works a lot better yes... (apparently testing on the wallet wasn't enough...)...

[Amph]

it work now without using anything, i just switched pool 

poolmn is running fine

[djm34]

it work now without using anything, i just switched pool 

poolmn is running fine

I think hashharder and supernova have difficulty set too high...
by the way the compilation seems also to work, you might have tried in debug mode...

[bigjme]

Im solomining it atm haha

[djm34]

Im solomining it atm haha

does it work ? Haven't had any chance with it...

[Amph]

it work now without using anything, i just switched pool 

poolmn is running fine

I think hashharder and supernova have difficulty set too high...
by the way the compilation seems also to work, you might have tried in debug mode...

yeah it work, it was just the pool fault, abotu that difficulty thing

[guitarplinker]

Im solomining it atm haha

does it work ? Haven't had any chance with it...

My wallet won't sync up. 

[djm34]

Im solomining it atm haha

does it work ? Haven't had any chance with it...

My wallet won't sync up.  

it isn't my fault either  
try to add those node:
addnode=144.76.142.47
addnode=144.76.142.49

[Bombadil]

For everyone still having strange troubles with ccminer fresh: https://bitcointalk.org/index.php?topic=670939.msg7723374#msg7723374

[btc-mike]

But rejoice, there will be an open sourced Wild Keccak nVidia GPU miner published by us,
as soon as the Boolberry developer(s) provide

a) some stratum capable pool code for Wild Keccak
b) a cpu miner based on cpuminer-multi with some working stratum support

Due to the need for transferring and updating the Wild Keccak scratchpad this
won't be trivial, but it's also not impossible.

once a) and b) are available, it won't take long for us to either integrate this into
ccminer or publish a fork of cpuminer-multi with some nVidia support.

Christian

Christian,

Boolberry stratum code is tested and complete. Both are here -> https://github.com/cryptozoidberg

Our test pool has found a few blocks -> http://162.243.210.156/#

ExtremePool has the stratum code running on http://boolberry.extremepool.org/

Mike