[DEVICE] SimpleRigResetter - Auto reboot crashed rigs - Extension Boards !!!

[tytanick]

Hello ,
Please add Total hashrate of Rigs on Dashboard
and , Hashrate of Each GPU in Each rig.
and Uptime rig , Total Rigs , Total GPU, and Custom Group like Rx series , R series [ 480 4Gb - 480 8GB ]

30 30 30 30 30
---
Total Hashrate : 3700 Mh / 3.7 Gh


thank you .

Ide is good but i cant do this.
It will work only for claymore, and not for the rest.
You can monitor your speed in pool stats.
This kind of speed in simplemining.net will be very hard to monitor.
Meaby , i say meaby in long future i will do claymore summing, but rest wont work so i think its no point of doing that.

AND its not this topic

[xleejohnx]

ughh europe only shipping sigh....

I will be shipping to USA and other countries too, but i need to check delivery ground becasue we never shipped to other countries than Europe
So dont worry

If you would I'd get one.
Plus some cables to make it worth wild

[tytanick]

Always updated info is here:
https://simplemining.net/page/simpleRigResetter

Ok guys, new informations:

SimpleRigResetter will cost 70$ for preorder in December and 90$ as normal price.
It will support 8 rigs + ability to connect TWO extension packs which give +24 +24 rigs.
Extension packs will cost about 99$.
So in other words 90$+99$+99$ will give you managing of 54 rigs with average cost 5,4$ per rig + cost of cables which is 2,5-6 $.
Cable between Main Board and Extension pack is in 99$ price and you can choose 10-100m cable.
Cables for rigs will be sold separately becasue everyone have different needs. On website there is price list for each lenght.
Cable between main board to rig can be max 10m.
Cable between extension pack and rig can be max also 10m.
Ofcourse all rigs are still electrically isolated and safe.
Also there is no power wattage limit that you are using in those rigs becasue  our device dont manage electrisity but only manages motherboard pins
So this is big advantage over all devices. + Low cost per rig.

One person had idea of making wireless little nodes that are powered via motherboard pins.
I looked into it and this is totally doable but the cost of one wireless little board near each rig would be like 30-40$ so its make totally no economic sesne.
Better to use stable long cables and organise then nicely

Shipping is little tricky becasue DHL killed price here. They want like 80$ for small package.
Thats why we will be sending packages using normal post office for about 20-30$.
And as alternative there will be DHL with 80$ cost (but i suppose only big orders will make sens with that DHL)
Preorders still are closed so dont write mails regarding that.
Once i will most of software ready and could show you much more i will open Preorders and ofcourse inform you.
This should be in this month- December 2016.

Always updated info is here:
https://simplemining.net/page/simpleRigResetter

[mettalmag]

this means I can restart my rigs any time ? without the need to be at place ?
One main board supports only two 24 extenders ? What config will I need for 140 rigs ?

[tytanick]

this means I can restart my rigs any time ? without the need to be at place ?
One main board supports only two 24 extenders ? What config will I need for 140 rigs ?

Hi, Yes exatly you will be able to reset any rig that is connected to my SimpleRigResetter while not beeing at place.
There is manual method: going to simple webinterface of my device and clicking "reset" near any rig you want.
Or by auto using my watcher program that will need to be installed on each rig. This program will send every few seconds "keepallive" packet to SimpleRigResetter.
If SimpleRigResetter wont receive packet from certain rig within 120 seconds then it will reset it automaticly.
You also will be able to disable watchdog and use only manual resetting ofcourse
One Main Board in deed can handle 2 ExtensionBoards for now.
If this will change then i will let everybody know.

For you 140 rigs you will need:

SimpleRigResetter (8 rigs) + Extension board (24 rigs) + Extension board (24 rigs) = 56 Rigs
SimpleRigResetter (8 rigs) + Extension board (24 rigs) + Extension board (24 rigs) = 56 Rigs
SimpleRigResetter (8 rigs) + Extension board (24 rigs) + (empty slot...................) = 32 Rigs
So in that case you will need to buy:
3x SimpleRigResetter and 5x Extension Boards.
10-100m Cable is free to each Extension Board and you would can select lenght.
Cables to rigs are paid as on website.
So in your case you will need 140 rig Cables (you will can select lenght of each cable)
Also for such bigger orders it will be good to use DHL instead of normal Postage package
It will give you Managing of total 144 rigs.
In that case you will need 3 LAN IP for SimpleRigResetters if you want web access.
For auto-script there will be no need of setting IP for SimpleRigResetter.

Also important to note fo you !!!

SimpleRigResetter
Pre-orders will be opened in this months - December 2016 and shipping of this batch will be 15-30 January.
Normal stock will be available after preorders are sent + about 15 days.

ExtensionBoards:
Preorders will be opened propably in January shipping most propably February.
Normal Stock Will be available after preorders are sent + about 15 days.

So in that Case Whole set you can have as soon as February when using preorders and March with normal stock.
Also note that preorders are cheaper.
Also There will be individual discounts for 5+ boards.
My advice is that you order 1 or 3 SimpleRigResetter for tests and the Extension Boards after i will be opening preorders.

We are on track on everything and we are ordering little upgraded PCB (with better organized Slots for each rig)

In next 15 days i will show more details. Demonstrate how it works. Also show webpanel etc
If you are interested you can write to admin@simplemining.net
I will add you mail to my special list ope interested people


All fresh info is always on
https://simplemining.net/page/simpleRigResetter

[mettalmag]

this means I can restart my rigs any time ? without the need to be at place ?
One main board supports only two 24 extenders ? What config will I need for 140 rigs ?

Hi, Yes exatly you will be able to reset any rig that is connected to my SimpleRigResetter while not beeing at place.
There is manual method: going to simple webinterface of my device and clicking "reset" near any rig you want.
Or by auto using my watcher program that will need to be installed on each rig. This program will send every few seconds "keepallive" packet to SimpleRigResetter.
If SimpleRigResetter wont receive packet from certain rig within 120 seconds then it will reset it automaticly.
You also will be able to disable watchdog and use only manual resetting ofcourse
One Main Board in deed can handle 2 ExtensionBoards for now.
If this will change then i will let everybody know.

For you 140 rigs you will need:

SimpleRigResetter (8 rigs) + Extension board (24 rigs) + Extension board (24 rigs) = 56 Rigs
SimpleRigResetter (8 rigs) + Extension board (24 rigs) + Extension board (24 rigs) = 56 Rigs
SimpleRigResetter (8 rigs) + Extension board (24 rigs) + (empty slot...................) = 32 Rigs
So in that case you will need to buy:
3x SimpleRigResetter and 5x Extension Boards.
10-100m Cable is free to each Extension Board and you would can select lenght.
Cables to rigs are paid as on website.
So in your case you will need 140 rig Cables (you will can select lenght of each cable)
Also for such bigger orders it will be good to use DHL instead of normal Postage package
It will give you Managing of total 144 rigs.
In that case you will need 3 LAN IP for SimpleRigResetters if you want web access.
For auto-script there will be no need of setting IP for SimpleRigResetter.

Also important to note fo you !!!

SimpleRigResetter
Pre-orders will be opened in this months - December 2016 and shipping of this batch will be 15-30 January.
Normal stock will be available after preorders are sent + about 15 days.

ExtensionBoards:
Preorders will be opened propably in January shipping most propably February.
Normal Stock Will be available after preorders are sent + about 15 days.

So in that Case Whole set you can have as soon as February when using preorders and March with normal stock.
Also note that preorders are cheaper.
Also There will be individual discounts for 5+ boards.
My advice is that you order 1 or 3 SimpleRigResetter for tests and the Extension Boards after i will be opening preorders.

We are on track on everything and we are ordering little upgraded PCB (with better organized Slots for each rig)

In next 15 days i will show more details. Demonstrate how it works. Also show webpanel etc
If you are interested you can write to admin@simplemining.net
I will add you mail to my special list ope interested people


All fresh info is always on
https://simplemining.net/page/simpleRigResetter

Thank you so much for detailed information, I will send an email asap.
In my case autoreset function doesn't meet my needs, but reseting with web interface would be great! In case of blackouts 20% of rigs won't come back to life and I have to drive 30 mins to get to the farm, that's not a bright side of having a farm far away, or if 3 or more rigs just hang also have to ride back at the farm to restart them.
The biggest thing I'm interested is the web interface itself and I'll wait for it to see when you update.
Also I was thinking about pre ordering one interface for testing purposes, but first things first I have to Interest my investors and I'm making little presentation for SRR.
Email sent

[tytanick]

Ok so wait for more youtube videos, photos and pictures that i will be making soon

[tytanick]

Little update.

We are pretty ok with schedule.
We changed a little layout of the board to be more user friendly and put SimpleRigResetter name on it.
We received yesterday new printed board.
Now we will put all transistors on it and programm it with our firmware.
If it will have no mistakes and no bugs, then we will order big quantity of printed boards and start production process
So the date of shipping is still 15-30 January
I didnt want to release preprder until we are certain that the board has no bugs and we also will show how it will look like in changed layout.
Anyway next 7-10 days i will open preorders most propably and start selling first batch

Here is how it looks like printed board without elements of your PRODUCTION UNIT

[mettalmag]

Little update.

We are pretty ok with schedule.
We changed a little layout of the board to be more user friendly and put SimpleRigResetter name on it.
We received yesterday new printed board.
Now we will put all transistors on it and programm it with our firmware.
If it will have no mistakes and no bugs, then we will order big quantity of printed boards and start production process
So the date of shipping is still 15-30 January
I didnt want to release preprder until we are certain that the board has no bugs and we also will show how it will look like in changed layout.
Anyway next 7-10 days i will open preorders most propably and start selling first batch

Here is how it looks like printed board without elements of your PRODUCTION UNIT

Great news, can't wait to get one.
Will there be expansion boards in pre order ?

[tytanick]

Extension Boards wont be in preorders.
We will start making them after first batch.

[Hotmetal]

Extension Boards wont be in preorders.
We will start making them after first batch.

I'm ready to order. Where do i sign up

[tytanick]

Please wait just few more days
We have few production units ready and i will post photos of it final version today/tomorrow.
It has reorganized slots to be even more simple
I am still preparing preorder system so it will be ready in next few days, then i will write email to all registered users and on forum with info and link where to place pre-orders.
I also talked to our production line and i know that we will have delay.
Due to holidays and new year, our first batch of printed boards will arrive 15 january to our prodiction line.
Then we will need to solder all neseserry components on all boards so we will be sending preorders in february.
I will write all more presise info in next days.

We are closer and closer to shipping date

[tytanick]

LITTLE UPDATE of progress

Ok guys.
We have our production unit that we will be sending to you guys.
Anyway i updated whole website: photos, prices of device and shipping, also times.
Important is to note two things .
First is that we will start sending 1-28 February 2016 (mostly due to holidays we decided not to rush it and do it little slower .
Second is that first firmware that will be in SRR will most propably wont have web interface finished but all managing options will be in exe program for windows.
Web interface will be in February and we will release new firmware which ofcourse you can flash to our SimpleRigResetter Boards

So preorder guys:
- preorders will be limited by supply of about 50-100 Boards
- you will receive the same hardware as stock
- you will pay 20$ less than stock price
- there is a chance that we will not make all functions finished on time and you will need to upgrade firmware few days later after you got your SRR delivery
But i guess its not a problem as we have upgrade system integrated and it will alo be very easy (few clicks in windows exe application)
Most propably web interface will be missing but there will be windows exe application with the same functions as web interface.
Anyway web interface is little bit more complicated and we need to do this at the end.

I will ofcourse post more videos very soon (especially with auto rebooting feature


PREORDERS WILL START about 26 December - 10 January !!! - i will post here info and send emails to everybody !

[adamvp]

Any updates?

[tytanick]

There was holidays and new year. We are getting back to work

[ZsZolee]

There was holidays and new year. We are getting back to work

If there is a power outage, and the power comes back, can the SimpleminingResetter start the Rig? Or it must be definitely done manually? Thanks

[Hotmetal]

There was holidays and new year. We are getting back to work

If there is a power outage, and the power comes back, can the SimpleminingResetter start the Rig? Or it must be definitely done manually? Thanks

Most BIOS these days can change the state to power on automatically in the event of a power outage. (it's configurable in the BIOS, i've done it on mine)

[tytanick]

There was holidays and new year. We are getting back to work

If there is a power outage, and the power comes back, can the SimpleminingResetter start the Rig? Or it must be definitely done manually? Thanks

Most BIOS these days can change the state to power on automatically in the event of a power outage. (it's configurable in the BIOS, i've done it on mine)

Exactly as ZsZolee said, its a motherboard feature so we dont want to mess those features and provide them into rigresetter.

[ZsZolee]

There was holidays and new year. We are getting back to work

If there is a power outage, and the power comes back, can the SimpleminingResetter start the Rig? Or it must be definitely done manually? Thanks

Most BIOS these days can change the state to power on automatically in the event of a power outage. (it's configurable in the BIOS, i've done it on mine)

Great, thanks! I will check it!

[tytanick]

SimpleRigResetter Info UPDATE
Ok guys, its time to write little update on progress
In next 10 days we will have first batch or SimpleRigResetters and cables.
I decided not to do CUSTOM PHP script for my SimpleRigResetter Pre orders becasue it was taking too much time.
So as now, i am configuring Shop on Magento OS Commerce Shop.
As soon as i will test it, i will open it for public and "Pre Orders" will be available to buy
I suppose it will happen in next 3-4 days from now !  - i will write ofcourse email to subscribed members and here.
Also SORRY GUYS that is didnt opened pre-orders in December 2016, ,but i thing nothing bad happen as long as it will be open very soon right ?
At the beginning there will be payments only via Bitcoin.
Propably it will stay that way as everyone involved in this market have bitcoin
If there will be more requests about other ways to pay - i will also consider them.

We have working Windows Aplication for managing SimpleRigResetter with most functions.
Linux and windows AGENT scripts for sending keep allive packets will be done in next 2 weeks.

Anyway we are on schedule with devices and software !!!
SimpleRigResetters from batch will start sending 20-30 January 2017 (Meaby even all of them will be send in January
"CHEAP Preorder Batch" will have about 50 devices available.
Next batch will be very soon after it (like 1-2 weeks) but it will cost more

So keep your eyes on it, i will release in few days shop in which you will can preorder SRR + cables.

Also if you guys will have needs for software update on SimpleRigResetter and windows application or linux/windows Agent - i will hear you and implement it
Ofcourse all future updates of firmware and software ARE FREE unlimited time.

If you have any questions - just shoot