[DEVICE] SimpleRigResetter - Auto reboot crashed rigs - Extension Boards !!!

[tytanick]

Has anyone setup one of these on ethos?

You need only add script from webisite to autostart.
You need basic linux skills for that.

[chiwalfrm]

Hello I have a real problem.  I unscrewed the SRR from the backplate, so I can take some measurements to look into 3D-printing a case but I lost one of the screws and three of the washers.  The seller tytanick says I have to buy another entire SRR to get 1 screw and 3 plastic washers, even though I only have four rigs.  I offered to pay for double the postage (postage from Poland to US in a 50-gram envelope is $1.62 but he still said no.

If someone who orders an SRR can ask him to include the 1 screw and 3 plastic washers and after you get them, tape them to a piece of paper, drop those in an envelope and send to me, I will send you $5 via PayPal.  Thank you.  Now i have bare board that may touch metal at any time and short the device.

I really hope the seller can come through for me.

[HolyHatred]

Hello I have a real problem.  I unscrewed the SRR from the backplate, so I can take some measurements to look into 3D-printing a case but I lost one of the screws and three of the washers.  The seller tytanick says I have to buy another entire SRR to get 1 screw and 3 plastic washers, even though I only have four rigs.  I offered to pay for double the postage (postage from Poland to US in a 50-gram envelope is $1.62 but he still said no.

If someone who orders an SRR can ask him to include the 1 screw and 3 plastic washers and after you get them, tape them to a piece of paper, drop those in an envelope and send to me, I will send you $5 via PayPal.  Thank you.  Now i have bare board that may touch metal at any time and short the device.

I really hope the seller can come through for me.
http://imgur.com/a/6B9zB

why not just swing by a local hardware store?

[tytanick]

why not just swing by a local hardware store?

Exactly what i told him
You will buy those for like 1$ maximum.
And ordering here it would cost like 10$ - the shipping process costs me.
Please look for those in your local shop. I dont have sercive for sending screws - its too much hassle.

[TR8888]

Can I buy V2 this week?

[tytanick]

Can I buy V2 this week?

Yes, it will be released but due to overwhelming number of order it will be on pre-prder basis.
Meaning processing time will be up to 15 days becasue i dontlike promise than i will ship all within 3 days because i wont

[fittsy]

Can I buy V2 this week?

Yes, it will be released but due to overwhelming number of order it will be on pre-prder basis.
Meaning processing time will be up to 15 days becasue i dontlike promise than i will ship all within 3 days because i wont

How do we pre-order? Your shop doesn't let us

[tytanick]

Can I buy V2 this week?

Yes, it will be released but due to overwhelming number of order it will be on pre-prder basis.
Meaning processing time will be up to 15 days becasue i dontlike promise than i will ship all within 3 days because i wont

How do we pre-order? Your shop doesn't let us

2 more days and it will let you

[JohnBitCo]

Has anyone setup one of these on ethos?

You need only add script from webisite to autostart.
You need basic linux skills for that.

This sounds interesting.  Several ASIC we have used all had the same pain in the butt issues that made them even more of a pain than running a simple server of some type. 

[RunnerUp]

I don't see an add to cart option on SSRv2 on your page yet will that follow tomorrow?

[tytanick]

[tytanick]

SSRv2 is available in my shop.
Keep in mind that it will be shipped WITHIN 30 days after ordering !!!
https://shop.simplemining.net/

[jennywhzz]

I don't see an add to cart option on SSRv2 on your page yet will that follow tomorrow?

The initial setup was forced through a LAN connection, which is understandable and fine, except that sometimes when there was a bad shutdown or startup, the system would go back to needing that LAN connection.

[TR8888]

Ordered 1, I noticed you crept the price up but oh well I still think it's a reasonable fair price.

Thanks

[rabbitr32]

ordered 2 units. thanks

any idea when nvidia support will come ?

[Sequoia93]

I am having a problem with my SSRV1. 7 out of 8 rigs attached to it were rebooting nearly every 3 minutes, after some troubleshooting it appears that the SSR is actually rebooting all but 1 rig over and over.

I do no have watchdog enabled currently, and believe I set it up just fine according to Tytanick's instructions. Is it possible that the SSR is faulty? or could I have done something to cause this problem?

[chiwalfrm]

Hello I have a real problem.  I unscrewed the SRR from the backplate, so I can take some measurements to look into 3D-printing a case but I lost one of the screws and three of the washers.  The seller tytanick says I have to buy another entire SRR to get 1 screw and 3 plastic washers, even though I only have four rigs.  I offered to pay for double the postage (postage from Poland to US in a 50-gram envelope is $1.62 but he still said no.

If someone who orders an SRR can ask him to include the 1 screw and 3 plastic washers and after you get them, tape them to a piece of paper, drop those in an envelope and send to me, I will send you $5 via PayPal.  Thank you.  Now i have bare board that may touch metal at any time and short the device.

I really hope the seller can come through for me.

Just a reminder that I am still looking for help with this from someone in the USA who buys an SRRv2.  It is like getting a discount, and you would be helping out a fellow miner.  Thanks in advance.

[tytanick]

I am having a problem with my SSRV1. 7 out of 8 rigs attached to it were rebooting nearly every 3 minutes, after some troubleshooting it appears that the SSR is actually rebooting all but 1 rig over and over.

I do no have watchdog enabled currently, and believe I set it up just fine according to Tytanick's instructions. Is it possible that the SSR is faulty? or could I have done something to cause this problem?

It could be fault ofcourse but rebooting over and over i gues doesnt mean its fault.
Rather i would say its bad connected.
Please chciedk if the status (green/red circles) is showitn good  status. Meaby you connected something incorrectly ?
If you still have problem after doublechecking please write to admin@simplemining.net and i will help you via team viewer if its a windows rig and if its a simplemining rig then lets talk via email
Dont worry. most cases its bad connection but 2% of the SRR could be fault so free RMA replace is ifcourse on the table !
Lets talk via email.

[HolyHatred]

if i wanted to make my own length cable for the ssrV2 what is the  max length i should stay under?

[kvakva2000]

When will Extension Board be available?