Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480!

[Pennywis3]

There are timings, in full view, on this very forum for MJR that give 1200h/s on cn heavy at 1244/2125 570 nitro+ 8g.
Just keep looking. 

Not even close to those speeds on public timings, post proof or it didn't happen.

The best published for me are those of Doktor, i am doing 1080h/s @ 1240/2150 on them, and even that is after hours of testing different settings and miners ( Nitro+ 570 8GB ).

[UnclWish]

There are timings, in full view, on this very forum for MJR that give 1200h/s on cn heavy at 1244/2125 570 nitro+ 8g.
Just keep looking. 

This forum is very big. And I can looking for years in search of right info. Maybe you share it to save our time?

[lebuawu2]

There are timings, in full view, on this very forum for MJR that give 1200h/s on cn heavy at 1244/2125 570 nitro+ 8g.
Just keep looking. 

Not even close to those speeds on public timings, post proof or it didn't happen.

The best published for me are those of Doktor, i am doing 1080h/s @ 1240/2150 on them, and even that is after hours of testing different settings and miners ( Nitro+ 570 8GB ).

which miner and what is the setting? the best I can get only 1050 h/s.

[cvsea]

Gentlemen,

Excuse my bluntness but it also took me lots of time and potential revenue lost in order to figure it all out.
The information in here on the forum. Might not be stable on most cards anyway but it is possible.
I won't detail here as it is not related to this thread/software.

Sorry for offtopic zawawa.

[UnclWish]

Gentlemen,

Excuse my bluntness but it also took me lots of time and potential revenue lost in order to figure it all out.
The information in here on the forum. Might not be stable on most cards anyway but it is possible.
I won't detail here as it is not related to this thread/software.

Sorry for offtopic zawawa.

Timings is related to this theme. GGS have timigs settings. And his work depends from timings.
You can give us a link, or at least in what theme we must look.
Else your words will be just words. No screenshots, no proofs...

[zawawa]

I would say everyone is entitled to her or his privacy.
His advice was sound, too. I have some time to work on Hynix today. No worries.

[Pete_X]

I would say everyone is entitled to her or his privacy.
His advice was sound, too. I have some time to work on Hynix today. No worries.

Indeed, we help and share info - but we can't provide a 24/7 service 

Kinda as example we can use the "Strap" Discussion - there is at least one strap publicly available (even posted in this thread a few posts back) that allows Hynix MJR to go past 1000h/s kinda easy. The only thing someone has to do is to get the stuff together and add 1 to 1. Result would be stable if the starting point is stable and you go from there. Useless to start with timings if the core is not stable etc ....

Overall it takes one thing some do not want to invest easy -> time, kinda lots of it ...

@Zawawa: Surely you do not support modded bioses for a reason - as there is no chance to cover all do and don't do's which might take a count in the "does not work" ... As long as someone does know what he's doing the results with GGS are nice and stable - it just needs time ... not a really easy one click and top notch oc/strap whatever results.

I had to learn also my ropes, started in the 90's at 17600 Newhope Street in Fountain Valley, Ca 

[Littlegrand]

I tried GGS on my laptop just to see. It only has a 740m and gets 6h/s.  I see it getting jobs however never gets any shares and does not show up on my pool. Any idea why? hashes just too slow?

--J

[UnclWish]

I tried GGS on my laptop just to see. It only has a 740m and gets 6h/s.  I see it getting jobs however never gets any shares and does not show up on my pool. Any idea why? hashes just too slow?

--J

Yes. You think right.
This card is not for mining.

[joaocha]

I would say everyone is entitled to her or his privacy.
His advice was sound, too. I have some time to work on Hynix today. No worries.

@zawawa

theses particular timings are good for 570 hinyx (did not work well on 580 dont know why) , 31 on ethash(dual mining using claymore) and 920 on Monerov7 core 1200 memory 2100

777000000000000022C39C00AC595A3D90550F12B84C8408004006007E0514206A8900A00200312 0100F292F94273116

Hope these help you improve you miner, i got more particular timings, if you have interest i can give you for free, just pm me

[UnclWish]

I would say everyone is entitled to her or his privacy.
His advice was sound, too. I have some time to work on Hynix today. No worries.

@zawawa

theses particular timings are good for 570 hinyx (did not work well on 580 dont know why) , 31 on ethash(dual mining using claymore) and 920 on Monerov7 core 1200 memory 2100

777000000000000022C39C00AC595A3D90550F12B84C8408004006007E0514206A8900A00200312 0100F292F94273116

Hope these help you improve you miner, i got more particular timings, if you have interest i can give you for free, just pm me

Looks like that timings are for hynix 4Gb ajr memory. Thats why it didn't work with 8Gb hynix mjr memory. It's different types of memory.

[t3syncro]

Hey zawawa,

i still can't get phymem running - still getting an error. Changes on memory timings have no effect. Hitting the "print memory timings"-button has no effect either.
It's unmodified cards and 18.3.2-Driver.
Reinstalled GGS, used the standalone one, reinstalled drivers....

btw. The speed out of the box for ajr memory is good. I have 920h/s with 1150/1950.

Any idea?

[xlm19877]

hello  zawawa

can we running dual mining like claymore on your program ?

i will test it and give you my feedback

thank you

[RaidoP2]

Hi, I tried out your miner and I like it.

Do you only plan to support timing mod for RX series?
What about older R9 series, no support planned for those?

[UnclWish]

hello  zawawa

can we running dual mining like claymore on your program ?

i will test it and give you my feedback

thank you

Dual mining not effective allready. All second algos gives too small profit to mine them at all.

[UnclWish]

Who can say how much MH/s gives RX 580 on X16R?

[zawawa]

Hey zawawa,

i still can't get phymem running - still getting an error. Changes on memory timings have no effect. Hitting the "print memory timings"-button has no effect either.
It's unmodified cards and 18.3.2-Driver.
Reinstalled GGS, used the standalone one, reinstalled drivers....

btw. The speed out of the box for ajr memory is good. I have 920h/s with 1150/1950.

Any idea?

Sorry, I missed your reply. Can you see PhyMemWrapper.dll in your application folder?
It seems like the miner is not properly installed.

[zawawa]

Hi, I tried out your miner and I like it.

Do you only plan to support timing mod for RX series?
What about older R9 series, no support planned for those?

I am getting a used 290X just for that purpose. Stay tuned!

[zawawa]

I would say everyone is entitled to her or his privacy.
His advice was sound, too. I have some time to work on Hynix today. No worries.

@zawawa

theses particular timings are good for 570 hinyx (did not work well on 580 dont know why) , 31 on ethash(dual mining using claymore) and 920 on Monerov7 core 1200 memory 2100

777000000000000022C39C00AC595A3D90550F12B84C8408004006007E0514206A8900A00200312 0100F292F94273116

Hope these help you improve you miner, i got more particular timings, if you have interest i can give you for free, just pm me

Thanks, I will try that one first. Much appreciated!

[joaocha]

I would say everyone is entitled to her or his privacy.
His advice was sound, too. I have some time to work on Hynix today. No worries.

@zawawa

theses particular timings are good for 570 hinyx (did not work well on 580 dont know why) , 31 on ethash(dual mining using claymore) and 920 on Monerov7 core 1200 memory 2100

777000000000000022C39C00AC595A3D90550F12B84C8408004006007E0514206A8900A00200312 0100F292F94273116

Hope these help you improve you miner, i got more particular timings, if you have interest i can give you for free, just pm me

Thanks, I will try that one first. Much appreciated!

Elpida

777000000000000022AA1C00AC615B3CA0550F142C8C1506006004007C041420CA8980A9020004C 01712262B612B3715

some cards support up to 2050 + , but most on 2000 stable