skablast
Member
Offline
Activity: 476
Merit: 19
|
|
April 09, 2018, 01:13:29 PM |
|
As far as I know, the intensity on heavy need to be reduced compared to v7, by a minimum of 30 % to make it works..
Someone mining sumo will answer better
|
|
|
|
nitrobg
Member
Offline
Activity: 413
Merit: 17
|
|
April 09, 2018, 02:07:58 PM |
|
@Nitrobg. Go stock, acefawn sg-miner and then tweak sg parameter. I got 7.x . Average, I mean
Cheers mate, perhaps after the cryptonight boom I'll recheck aceneun/sgminer-gm-x16r. So far I've tried brian112358/sgminer-x16r and it gives quite low results even at a high intensity. Haven't tried running on custom threads/worksize but even at 7MH/s it is not really worth it over ethash.
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
April 09, 2018, 03:32:59 PM |
|
@Nitrobg. Go stock, acefawn sg-miner and then tweak sg parameter. I got 7.x . Average, I mean
Cheers mate, perhaps after the cryptonight boom I'll recheck aceneun/sgminer-gm-x16r. So far I've tried brian112358/sgminer-x16r and it gives quite low results even at a high intensity. Haven't tried running on custom threads/worksize but even at 7MH/s it is not really worth it over ethash. My first impression is that I should be able to increase performance quite a bit if I really put myself into it. I will push initial support for X16R today and work on optimizations thereafter.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
nitrobg
Member
Offline
Activity: 413
Merit: 17
|
|
April 09, 2018, 04:02:34 PM |
|
@Nitrobg. Go stock, acefawn sg-miner and then tweak sg parameter. I got 7.x . Average, I mean
Cheers mate, perhaps after the cryptonight boom I'll recheck aceneun/sgminer-gm-x16r. So far I've tried brian112358/sgminer-x16r and it gives quite low results even at a high intensity. Haven't tried running on custom threads/worksize but even at 7MH/s it is not really worth it over ethash. My first impression is that I should be able to increase performance quite a bit if I really put myself into it. I will push initial support for X16R today and work on optimizations thereafter. Awesome! What hashrate can a 580 achieve? Is it possible to include those optimizations on X17 as well? Right now, Verge-X17 is about as profitable as Ravencoin(X16r) and it's a shame that the RX cards don't have a proper miner for it.
|
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
April 09, 2018, 04:18:42 PM |
|
Well, some algos are already more optimized than others, so it is hard to tell at a first glance which algos are most optimizable. Optimizations should be pretty straight forward, though. We will see...
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
Branko
|
|
April 09, 2018, 05:19:48 PM |
|
No luck for me with this miner, back to command line
(continuing where miner last time stopped/crashed is bug, not a feature, when it hangs on "optimize" button)
|
|
|
|
Larvitar
Jr. Member
Offline
Activity: 196
Merit: 1
|
|
April 09, 2018, 05:37:54 PM |
|
No luck for me with this miner, back to command line
(continuing where miner last time stopped/crashed is bug, not a feature, when it hangs on "optimize" button)
Same here. All tests failed. I'll try with just one GPU to see if works. It's a tool with huge potential.
|
|
|
|
skablast
Member
Offline
Activity: 476
Merit: 19
|
|
April 09, 2018, 05:55:52 PM |
|
As far as I understood in my limits its that the optimize button work at the moment only on default pools.
|
|
|
|
Branko
|
|
April 09, 2018, 06:07:41 PM |
|
As far as I understood in my limits its that the optimize button work at the moment only on default pools.
1. I used it on default pools 2. I thought its optimizing hardware (GPU), not something specific to the pool, but someone correct me if I'm wrong...I mean, why would miner hang if its optimizing the way it works with pool?
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
April 09, 2018, 06:39:30 PM |
|
I just need to write the following in the bold print somewhere...
1. GGS does not support Blockchain drivers. 2. GGS does not support modded BIOS'es.
I just don't have time to support discontinued drivers or hardware that is way out of specifications as GGS itself does some pretty wild stuff under the hood. Hope you understand.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
Larvitar
Jr. Member
Offline
Activity: 196
Merit: 1
|
|
April 09, 2018, 06:42:37 PM |
|
I just need to write the following in the bold print somewhere...
1. GGS does not support Blockchain drivers. 2. GGS does not support modded BIOS'es.
I just don't have time to support discontinued drivers or hardware that is way out of specifications as GGS itself does some pretty wild stuff under the hood. Hope you understand.
1- So do you recommend the lastest Adrenalin drivers in compute mode, okay? 2- Of course, 'cause you can't guarantee the stability of a modded strap. But, the Optimize button fails at all if a modded bios is used?
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
April 09, 2018, 07:18:48 PM |
|
I just need to write the following in the bold print somewhere...
1. GGS does not support Blockchain drivers. 2. GGS does not support modded BIOS'es.
I just don't have time to support discontinued drivers or hardware that is way out of specifications as GGS itself does some pretty wild stuff under the hood. Hope you understand.
1- So do you recommend the lastest Adrenalin drivers in compute mode, okay? 2- Of course, 'cause you can't guarantee the stability of a modded strap. But, the Optimize button fails at all if a modded bios is used? 1. Yes. 2. That entirely depends upon the modded BIOS and which algorithm you choose to optimize.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
|
April 09, 2018, 08:28:30 PM |
|
Hi, zawawa! Are you still fighting with windmills? I repeat my old question. When are you going to release competitive miner for any card or algo?
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
April 09, 2018, 09:44:50 PM |
|
Hi, zawawa! Are you still fighting with windmills? I repeat my old question. When are you going to release competitive miner for any card or algo?
Please come back after you carefully study the latest version of GGS.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
inv1s1bl3
Newbie
Offline
Activity: 65
Merit: 0
|
|
April 10, 2018, 06:53:21 AM |
|
Zawawa, could you please advise what kind of intensity should I be using for Cryptonight-heavy algo? I have tried to mine it with the same settings, that I use for the normal cryptonight algorithm, but it seems they are too high for the heavy algo. I am not really experienced into these algorithms, since I am mainly mining ETH, but I would really like to try and see what my profits would be on the heavy one?
|
|
|
|
rednoW
Legendary
Offline
Activity: 1510
Merit: 1003
|
|
April 10, 2018, 08:14:58 AM |
|
Hi, zawawa! Are you still fighting with windmills? I repeat my old question. When are you going to release competitive miner for any card or algo?
Please come back after you carefully study the latest version of GGS. can you publish some speed results, e.g. for sapphire nitro+ rx480 8gb samsung or reference vega64 or vega56. Let's say ... for cryptonight v7 and cryptonight heavy. Or maybe some other algos you feel GGS is doing good
|
|
|
|
Branko
|
|
April 10, 2018, 08:19:36 AM |
|
Is memory strap optimization done dynamically, or handpicking from already premade straps?
|
|
|
|
inv1s1bl3
Newbie
Offline
Activity: 65
Merit: 0
|
|
April 10, 2018, 08:57:20 AM |
|
Does anyone know a guide how to modify the straps on RX580's for better cryptonight/cryptonight-heavy performances? I am currently with a BIOS mod for ETH and it seems that weaker cards are having far better results in terms of hashrate in comparison to my card! I would really love to use the max potential of it!
|
|
|
|
skablast
Member
Offline
Activity: 476
Merit: 19
|
|
April 10, 2018, 11:18:50 AM |
|
While I can understand that you don't want trouble supporting weird mod of cards, Branko and the other guy trying to test GGS just reported a legit bug in the software: if you select OPTIMIZE & select Criptonightv7 you get a thread exeption: the given key isn't present in the dictionary.
And because I'm writing on bugs: Fan: minimum is supposed to be 0 % and not 20 % Fan2: if you modify it and click on copy to the same cards, ggs crash and restart
Custom pool: can't be selected for CNv7
Missing algos: CN7lite
|
|
|
|
|