Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480!

[skablast]

the baffin rx 550 should  give around 500 h/s with intensity 56/58 on CN and 14.3Mhs with etash, shaders unlocked , with claymore with less than 50 watt

I have not Rx 560 but its not so different just more expensive.

I am aware of some other people with rx 550 rigs besides me, I don't know if someone have a rigs with that card so ,I believe its not that THE reason  but just ONE reason.

"shaders unlocked" give 1 Mh/s more on etash" with Claymore.
I don't think that you card screening recognize it or not, but I suspect not

There is a nice 3d by branko about the RX560 here in mining altcoins where all the people its reporting their settings, if you would like to avoid starting from scratch.

[1715632641]

1715632641

[1715632641]

1715632641

[1715632641]

1715632641

[zawawa]

the baffin rx 550 should  give around 500 h/s with intensity 56/58 on CN and 14.3Mhs with etash, shaders unlocked , with claymore.

I have not Rx 560 but its not so different.
There is a nice 3d by branko about that card here in mining altcoins where all the people its reporting their settings, if you would like to avoid starting from scratch

I will check that out. Thanks!

[zawawa]

RX 560 hashrates
https://bitcointalk.org/index.php?topic=2046072.0

This one, eh? VERY interesting...

[zawawa]

I really should have spent more time on tuning default settings... orz

[zawawa]

This doesn't look all that hard... If Cloo works on Linux, that is.

Porting Winforms Applications
http://www.mono-project.com/docs/gui/winforms/porting-winforms-applications/

Edit: Very nice, very nice...

Cloo is an open source, easy to use, managed library which enables .NET/Mono applications to take full advantage of the OpenCL framework.

[zawawa]

Slightly better, but not good enough...

[t3syncro]

Hmm,

i don't really understand the memory timings. When i copy the original straps, e.g. (1750 strap and use 1725MHZ ) from the card's bios (in this case Hynix AJR) to the memory timings field, the computer crashes (Thread stuck in device driver).
When i let GGS run at 1725MHZ and capture the timings after some time they are different from the original straps (1700: and 1625: and 2000:) written in the bios. This way memory strap optimizing by hand is rather impossible as it can't be compared.

2nd: The 550 with elpida can do easily 530-560H/s at cryptonight, it's just the memory timings. I've posted the settings before and memory timings before....

000000000000000022AA1C00AC595A30A0550F142C8CC505006004007C041420CA8980A9020004C 01712262B5C2B3715
2, 44, 8

[rednoW]

2 t3syncro

forget about ggs. it is buggy as hell. maybe some day some time but not now

[zawawa]

Hmm,

i don't really understand the memory timings. When i copy the original straps, e.g. (1750 strap and use 1725MHZ ) from the card's bios (in this case Hynix AJR) to the memory timings field, the computer crashes (Thread stuck in device driver).
When i let GGS run at 1725MHZ and capture the timings after some time they are different from the original straps (1700: and 1625: and 2000:) written in the bios. This way memory strap optimizing by hand is rather impossible as it can't be compared.

2nd: The 550 with elpida can do easily 530-560H/s at cryptonight, it's just the memory timings. I've posted the settings before and memory timings before....

000000000000000022AA1C00AC595A30A0550F142C8CC505006004007C041420CA8980A9020004C 01712262B5C2B3715
2, 44, 8

Mine is Hynix, though. See, it is ultimately the driver that decides on the timings, not the BIOS.
AMD's drivers even have microcodes for memory controllers to reprogram them. (GMC 8.1 for Polaris and GMC 9.0 for Vega.)
I spent the rest of the day fixing the installer, but it's all good now. I will run the optimizer overnight and see what's going to happen...

[FFI2013]

Hmm,

i don't really understand the memory timings. When i copy the original straps, e.g. (1750 strap and use 1725MHZ ) from the card's bios (in this case Hynix AJR) to the memory timings field, the computer crashes (Thread stuck in device driver).
When i let GGS run at 1725MHZ and capture the timings after some time they are different from the original straps (1700: and 1625: and 2000:) written in the bios. This way memory strap optimizing by hand is rather impossible as it can't be compared.

2nd: The 550 with elpida can do easily 530-560H/s at cryptonight, it's just the memory timings. I've posted the settings before and memory timings before....

000000000000000022AA1C00AC595A30A0550F142C8CC505006004007C041420CA8980A9020004C 01712262B5C2B3715
2, 44, 8

Does the 550 get better hashrates than the the 560 I have 2 one with micron and the other with hynix I get better rates with the micron but not 530 on cryptonight I have the clocks at 1100/2000 and one click timings but this is on linux I have a stripped down win 10 pro I'm going to reinstall windows on all my miners and install GGS maybe I'll get better rates 

[nitrobg]

Hm, can Vega's memory timings be soft modded like the Polaris ones? Its wide memory bus should be able to provide at least 60-70MH/s on ethash if the timings are right.

[t3syncro]

Hmm,

i don't really understand the memory timings. When i copy the original straps, e.g. (1750 strap and use 1725MHZ ) from the card's bios (in this case Hynix AJR) to the memory timings field, the computer crashes (Thread stuck in device driver).
When i let GGS run at 1725MHZ and capture the timings after some time they are different from the original straps (1700: and 1625: and 2000:) written in the bios. This way memory strap optimizing by hand is rather impossible as it can't be compared.

2nd: The 550 with elpida can do easily 530-560H/s at cryptonight, it's just the memory timings. I've posted the settings before and memory timings before....

000000000000000022AA1C00AC595A30A0550F142C8CC505006004007C041420CA8980A9020004C 01712262B5C2B3715
2, 44, 8

Does the 550 get better hashrates than the the 560 I have 2 one with micron and the other with hynix I get better rates with the micron but not 530 on cryptonight I have the clocks at 1100/2000 and one click timings but this is on linux I have a stripped down win 10 pro I'm going to reinstall windows on all my miners and install GGS maybe I'll get better rates  

This is my actual test miner..

https://picload.org/view/doacdwgw/ggsscreen.png.html

If you have Hynix AJR, you can try:

777000000000000022C29C0010DE5B43A0551013B50B8508004006007C0514206A8900A00200312 017112E3688293615

[skablast]

Those are good numbers for hynix

[Pete_X]

Zawawa:

Just noted that when you stop the miner and it goes idle - the fans stay at the % they were running - even if the idle temp is in around 40c (normaly they are off there). So pse check if there is something stuck and does not get reset when the miner is stopped.




/ https://s7.postimg.cc/ze5mdcex7/Idle.png /

I could reproduce that behavior a few times:

1. Start miner and let it run a while
2. Stop the miner with "Pause" - Fans "stuck"
3. Close the miner - "Fans stuck"

Rig after 10 min or so:



/ https://s7.postimg.cc/4ze8m4kiz/Idle2.png /

Devices 1-3 are still at 23%/43%/27% - the only Device that looks kinda  normal is Device 0.

Fan Settings for all Devices in GGS: Target 53c, Max: 65, Speed Min: 0, Max: 100

Restarting the miner does not solve the problem. What does stop the fans and gets them back to "normal" is i.e. starting Sapphire Twix. Start it, close it and they are back to normal - till ya start the miner and stop it again.

Nothing changed on the rig, W10, Cards 470/480/580 as before and driver is still 18.3.4. - as 18.4.1 is a no-go so far.

[zawawa]

Hm, can Vega's memory timings be soft modded like the Polaris ones? Its wide memory bus should be able to provide at least 60-70MH/s on ethash if the timings are right.

AMD isn't as open with Vega's memory controller, but...
Well, I should not talk too much on this topic, I guess.

[zawawa]

Zawawa:

Just noted that when you stop the miner and it goes idle - the fans stay at the % they were running - even if the idle temp is in around 40c (normaly they are off there). So pse check if there is something stuck and does not get reset when the miner is stopped.




/ https://s7.postimg.cc/ze5mdcex7/Idle.png /

I could reproduce that behavior a few times:

1. Start miner and let it run a while
2. Stop the miner with "Pause" - Fans "stuck"
3. Close the miner - "Fans stuck"

Rig after 10 min or so:



/ https://s7.postimg.cc/4ze8m4kiz/Idle2.png /

Devices 1-3 are still at 23%/43%/27% - the only Device that looks kinda  normal is Device 0.

Fan Settings for all Devices in GGS: Target 53c, Max: 65, Speed Min: 0, Max: 100

Restarting the miner does not solve the problem. What does stop the fans and gets them back to "normal" is i.e. starting Sapphire Twix. Start it, close it and they are back to normal - till ya start the miner and stop it again.

Nothing changed on the rig, W10, Cards 470/480/580 as before and driver is still 18.3.4. - as 18.4.1 is a no-go so far.

Thanks for the report. I am done with the new WiX-based installer and now preparing a new version.
Please wait for it and see the problem still persists.

[singlass]

i can't run it i keep getting this error
https://s9.postimg.cc/51i68kuj3/Untitled_2.jpg

thank you

[Pete_X]

i can't run it i keep getting this error
https://s9.postimg.cc/51i68kuj3/Untitled_2.jpg

thank you

--->>

Code:

Problem Reporting Template for GGS Version 1.3.x

CPU (Cores):
CPU with Internal GPU: Yes / No
RAM (GB):
MoBo: 
PSU: xxxx W
Swap File (GB:

OS: W10 (x)
AMD Driver Version: 18.x.x.x

Algo:              Settings:
Pool:  (inkl. Port)

GPU 0:
Bios Version:      Original ( ) - Modded ( ): PBE 1-Click ( ) Other ( ) ->
Strap: 
GPU 1:
Bios Version:      Original ( ) - Modded ( ): PBE 1-Click ( ) Other ( ) ->
Strap: 
GPU 2:
Bios Version:      Original ( ) - Modded ( ): PBE 1-Click ( ) Other ( ) ->
Strap: 
GPU 3:
Bios Version:      Original ( ) - Modded ( ): PBE 1-Click ( ) Other ( ) ->
Strap: 
GPU 4:
Bios Version:      Original ( ) - Modded ( ): PBE 1-Click ( ) Other ( ) ->
Strap: 


Problem: 



Screenshots:

[zawawa]

i can't run it i keep getting this error
https://s9.postimg.cc/51i68kuj3/Untitled_2.jpg

thank you

Please install .Net Framework 4.7.1.

[singlass]

i can't run it i keep getting this error
https://s9.postimg.cc/51i68kuj3/Untitled_2.jpg

thank you

Please install .Net Framework 4.7.1.

worked, thanks man