Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480!

[zawawa]

Hold  on for a sec. I'm burying myself in the matrix of the GCN assembly right now.
I should be able to hit the 64 VGPR mark soon...

[UnclWish]

Hold  on for a sec. I'm burying myself in the matrix of the GCN assembly right now.
I should be able to hit the 64 VGPR mark soon...

Be careful, we don't want to matrix has you...

[zawawa]

Well, you kind of have to immerse yourself into it, you know. 

[morinfen]

Help, there is vega56 how to make downvolt with use of your program?
in the section overclocking I put
PL - 100%
CC - 1350
CV - 930
MC - 920
MV - 930
but they it isn't applied, when viewing values in HWmonitor gpu core voltage 1.113v
and consumption of the card 215w.
It was succeeded to lower tension only having delivered to PL - 70%, consumption becomes 155w but also hashes fall till 1750.
The only thing, I in a threshing barn have except Vega a card 1080ti, it is possible as that influences, for her I use msi afterbirner

[zawawa]

Help, there is vega56 how to make downvolt with use of your program?
in the section overclocking I put
PL - 100%
CC - 1350
CV - 930
MC - 920
MV - 930
but they it isn't applied, when viewing values in HWmonitor gpu core voltage 1.113v
and consumption of the card 215w.
It was succeeded to lower tension only having delivered to PL - 70%, consumption becomes 155w but also hashes fall till 1750.
The only thing, I in a threshing barn have except Vega a card 1080ti, it is possible as that influences, for her I use msi afterbirner

The next version will get better voltage control as it would directly access the hardware.
I will upload it as soon as I am done with the ethash kernel.

[UnclWish]

Why nobody dasn't allowes that HWInfo can read sensors wrong or with bugs due to new AMD driver's specifics?

[UnclWish]

PHI1612 allready not profitable... Now it's need to mine Lyra2Z algo... But there is no miner for lyra2Z for Windows yet, except sgminer. But sgminer has kernel for lyra2Z six mounths old... Not sure that it will normal work...

[QuirkSilver]

Both my rigs refuse to install the 1.3.8 package.
It says older version has to be uninstalled first. I DID reinstall 1.3.7 and uninstall it.... problem persists. Dying to experiment with Hynix AJR timings for Cryptonight i got to remove that garbage one click! your tool will be PERFECT and productive for that Zawawa.
all the best

[UnclWish]

It's unbelievable:


Lyra2Z on 580 gives 5Mh/s and on Vega 9MH/s...
Here is theme https://bitcointalk.org/index.php?topic=3264474.0

[Iamtutut]

It's unbelievable:


Lyra2Z on 580 gives 5Mh/s and on Vega 9MH/s...
Here is theme https://bitcointalk.org/index.php?topic=3264474.0

Not released, seems it won't be.

[UnclWish]

zawawa, how is progress with new version?

[zawawa]

I am still debugging the next version.
Boy, this Ethash thing takes a long time!

Edit: It seems like there is a bug around overclocking in the latest AMD drivers.
What a piece of sh*t...

[UnclWish]

I am still debugging the next version.
Boy, this Ethash thing takes a long time!

Edit: It seems like there is a bug around overclocking in the latest AMD drivers.
What a piece of sh*t...

You about 18.6.1 or 18.5.2?

[zawawa]

I am still debugging the next version.
Boy, this Ethash thing takes a long time!

Edit: It seems like there is a bug around overclocking in the latest AMD drivers.
What a piece of sh*t...

You about 18.6.1 or 18.5.2?

I haven't tried 18.6.1 yet. Let me see...

[UnclWish]

Looks lilke 18.6.1 is the same as 18.5.2...

[zawawa]

Looks lilke 18.6.1 is the same as 18.5.2...

I tried everything with 18.6.1, but overclocking still doesn't work. Trying to revert to 18.3.2...

[UnclWish]

Looks lilke 18.6.1 is the same as 18.5.2...

I tried everything with 18.6.1, but overclocking still doesn't work. Trying to revert to 18.3.2...

No, no, no. You wrote that you find the way to direct access to GPU's. Like Claymore's miners. They are still works on new drivers. And can overclock GPU's with them.
On Windows 1803 drivers 18.5.1+ needed to support WDDM2.4.
You must find how to overclock GPU's with new drivers.

[zawawa]

Looks lilke 18.6.1 is the same as 18.5.2...

I tried everything with 18.6.1, but overclocking still doesn't work. Trying to revert to 18.3.2...

No, no, no. You wrote that you find the way to direct access to GPU's. Like Claymore's miners. They are still works on new drivers. And can overclock GPU's with them.
On Windows 1803 drivers 18.5.1+ needed to support WDDM2.4.
You must find how to overclock GPU's with new drivers.

Well, I need to isolate the problem first. It seems like the problem is specific to the new Ethash kernel.
Strange, strange...

[UnclWish]

zawawa. Can't you integrate support for nicehash heavy algo into 1.3.8 version? I want to mine it with GGS until you work with new version...

[MinedTangerine]

I don't want to sound ungrateful or anything, but you seem to be wasting your talent on things that don't matter in mining. Forget about the GUI, it just brings bugs and its actually harder to work with. Forget the fancy auto overclocks and straps etc...

What we AMD miners really need is good kernels for profitable algos. Give us that and you will have more then enough money and users with a resonable fee for your miner. I tried using your miner a few times, but in the end I only have problems with the GUI and some obscure bugs because of that. And in the end other miners are simply faster and easier to use because of the command line.

Just my 2 cents, don't waste your potential.

P.S. I am sorry if I sounded hars, but I am always blunt and to the point, ubable to sugarcoat.