[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[BitBustah]

0,178 mBTC = 1,17 eur... is that what you made n 24 hours?

[k2laci]

0,178 mBTC = 1,17 eur... is that what you made n 24 hours?

See this settings : https://pasteboard.co/HcJiWo4.png

I selected 6 pools and mining 24h. Nplusminer has chosen the most profitable every 5 minutes. The Zergpoolplus 0,178 mBTC result.

[Lubrifiant]

I've done a 24-hour test with these settings (I have 6x1070 GPU Rig) :

https://pasteboard.co/HcJiWo4.png     (BTC Wallet address and MPH name hidden)

The result :

Code:

Blazepoolplus:	0,121	mBTC
Zergpoolplus:	0,178	mBTC
Zpoolplus:	0,011	mBTC
Ahaspoolplus:	0,015	mBTC
Hashref:	0,154	mBTC
MiningPoolHub:	0,044	mBTC
Summary:	0,523	mBTC

(The difference between "total unpaid" on start-up and shutdown.)



If I only mining ETH or ZEC I still have 1 mBTC a day!

Thank you for your feedback !
Interesting

And where do you mine ETH ? Which pool ?

[chuckspadina]

Is there a way to switch between pools? I get that there's auto algo-switching WITHIN a pool

However, is there a possibility of switching between pools, maybe for example, zpool and miningpoolhub, or even zergpool?

[Raziel666]

Is there a way to switch between pools? I get that there's auto algo-switching WITHIN a pool

However, is there a possibility of switching between pools, maybe for example, zpool and miningpoolhub, or even zergpool?

Yes, just enter the name of the pools separated by commas.

[k2laci]

I've done a 24-hour test with these settings (I have 6x1070 GPU Rig) :

https://pasteboard.co/HcJiWo4.png     (BTC Wallet address and MPH name hidden)

The result :

Code:

Blazepoolplus:	0,121	mBTC
Zergpoolplus:	0,178	mBTC
Zpoolplus:	0,011	mBTC
Ahaspoolplus:	0,015	mBTC
Hashref:	0,154	mBTC
MiningPoolHub:	0,044	mBTC
Summary:	0,523	mBTC

(The difference between "total unpaid" on start-up and shutdown.)



If I only mining ETH or ZEC I still have 1 mBTC a day!

Thank you for your feedback !
Interesting

And where do you mine ETH ? Which pool ?

Anywhere: Ethermine, Nicehash, MPH, etc.

[monkeyguy]

Anyone know how I could set it to start with the GUI minimized? Putting -windowstyle minimized in the start.bat minimizes the console, but not the gui.

[BitBustah]

Kinda too lazy to browse all those pages... Can the -interval still be set?

[monkeyguy]

Kinda too lazy to browse all those pages... Can the -interval still be set?

It can be set in the ps1 afaik. Nemo has said it's better to change the decaybase instead if you want to decrease switching. Personally, I just use a high ActiveMinerPctGain

[ravenj]

Hello

I’ve been using nemosminer for some time with zergpool and I've been noticing that, in the last few days, hashrate of different miners decreases over time instead of increasing. If the miner restarts the hashrate goes to normal.

Why is this happening?

[sundownz]

To work with the new zergpool address structure this is the fix:

In the zergpool .ps1 you change this:

$Locations | ForEach {
    $Location = $_

   $zergpool_Request | Get-Member -MemberType NoteProperty | Select-Object -ExpandProperty Name | foreach {
       $zergpool_Host = If ($Location -eq "Europe"){$Location + ".mine.zergpool.com"}else{"$_.mine.zergpool.com"}

-----

Add the part in BOLD/RED text -- and that is it!

Announcement from zergpool.com :

"We will change to <ALGO>.mine.zergpool.com:<PORT> server name format, so you can start updating your configuration to support this slowly. Old format is operational as well"

-----

I am deploying NEMO 2.5.2 /Zergpool on a bunch of systems and I don't want to have to go back and update later so just made this change manually =)

[crackfoo]

We've added a new algo to zpool: sha256t

Cheers

[manc]

@minerx117
Just grabbed a fresh 3.0 master download and I see you've moved almost all of the ccminer algos to Tpruvot Cuda9... was there some big update? For quite a while now I've run the alexis polytimos release as it had the best hash on many of them - x17, c11, skein off the top of my head.

-19 on X17?

Are you guys trying to down tune the miners??

[geck]

I've been testing the version 3 yesterday and I have an issue to report. It might be something I overlooked because of the new design, but let me start by explaining how I work the version 2 atm.

I have 2 different kinds of cards on my rig, so each kind of card is more profitable in different algos. Because of that, I don't want to run an average of all my cards on every algo and instead I've made 2 folders of NemosMiner, each folder with different data inside the "stats" folder and I run 2 instances at the same time, one for each group of cards.
At first the benchmark would get confused when two ccminers were running and it'd update the hashrate incorrectly. In order to fix that, I run the benchmark on the 1st group and then turned the "*HashRate.txt" files into read-only. I then benchmarked the 2nd group of cards and again locked their hashrate files into read-only. Since then, running 2 instances at the same time works like charm, the only drawback is that the hashrates are not being updated automatically but if you don't change anything in your system, the hashrate rarely changes because of an updated miner... and of course you can just run the benchmark again!

I believe the above trick would help people with more cards than the miner can handle? Maybe?

Anyway to be honest I posted the above long explanation in case someone wants to try it, the issue I have with version 3 with the above setup is pretty simple... I can't setup specific cards for each instance OR I'm doing it wrong and there's no documentary to help me!

You could setup if you switch to manual edition of the config files.
However, NPlusMiner now supports running multiple instances. I guess that might ease your life
https://github.com/MrPlusGH/NPlusMiner/releases

Multiple instances doesn't fully work for me. If i start the second after the first instance is running, the second instance would close the miner for the first instance until the sleep cycle is over.
Also if i do not make the hashrate files read-only, there is a chance that it will get overwritten.

What i have done for now is to benchmark separately, making the hash-rate files read-only, then starting both instances simultaneously.

The other thing i noticed is, and i'm not sure if its a bug, is i have about 10 different instances running at the same time. All 10 would have different btc/gh/day values. The difference is about a couple of percent, but this means on the same rig with the same cards, i would have two instances mining different algos. Is this normal?

[Zirillian]

I just updated to Nemos Miner 2.4.1 and on 2 PCs it seems to be stuck trying to benchmark xmrig which doesn't launch and it just sits there saying Sleep 300 sec

https://i.imgur.com/pKgqF6g.png

I too have this same issue. I tried removing the coins that gave me errors but it keeps ticking off all coins one right after another as having an issue (after I remove problem ones).  What's going on here?

[MaxiMan]

Can i just run bat with commands as before 3.0?
I want to make a batch for different pools and GPUs as before

[MaxiMan]

Payment treshold for Zergpool is incorrect
Info is hosted on web as miner calls this site:
http://nemosminer.x10host.com/poolapiref.json here shows its 0.01

Please correct to 0.008 or 0.004
cant edit myself this data?

[RivAngE]

An easy and a bit stupid question from me, I'm sure it's written somewhere but I can't find it!
How can I set a custom Interval to more than 60sec?

Payment treshold for Zergpool is incorrect
Info is hosted on web as miner calls this site:
http://nemosminer.x10host.com/poolapiref.json here shows its 0.01

Please correct to 0.008 or 0.004
cant edit myself this data?

I'm sure you can since it's open source, I've edited some parameters that are sent to the miners but I couldn't find the payment threshold anywhere. I though it'd inside the "Pools" folder but I couldn't read anything like that in the files inside it.

[cryptomoblo]

I've done a 24-hour test with these settings (I have 6x1070 GPU Rig) :

https://pasteboard.co/HcJiWo4.png     (BTC Wallet address and MPH name hidden)

The result :

Code:

Blazepoolplus:	0,121	mBTC
Zergpoolplus:	0,178	mBTC
Zpoolplus:	0,011	mBTC
Ahaspoolplus:	0,015	mBTC
Hashref:	0,154	mBTC
MiningPoolHub:	0,044	mBTC
Summary:	0,523	mBTC

(The difference between "total unpaid" on start-up and shutdown.)



If I only mining ETH or ZEC I still have 1 mBTC a day!

Thank you for your feedback !
Interesting

And where do you mine ETH ? Which pool ?

Anywhere: Ethermine, Nicehash, MPH, etc.

Looking at your config, seeing you mine all algo's. You should only mine the 5-6 most profitable. With 6xGTX1070 I'm making 0,85 mBTC at ahashpoolplus.

[chiggx]

I am still on version 2.4, does the newest version improve mining efficiency? i am not keen to keep uninstalling and reinstalling new versions and reconfiguring batch files each time.