BitBustah
|
|
March 20, 2018, 04:04:26 PM |
|
0,178 mBTC = 1,17 eur... is that what you made n 24 hours?
|
|
|
|
k2laci
Member
Offline
Activity: 172
Merit: 10
|
|
March 20, 2018, 04:10:13 PM |
|
0,178 mBTC = 1,17 eur... is that what you made n 24 hours?
See this settings : https://pasteboard.co/HcJiWo4.pngI selected 6 pools and mining 24h. Nplusminer has chosen the most profitable every 5 minutes. The Zergpoolplus 0,178 mBTC result.
|
|
|
|
Lubrifiant
Newbie
Offline
Activity: 51
Merit: 0
|
|
March 20, 2018, 04:17:44 PM |
|
I've done a 24-hour test with these settings (I have 6x1070 GPU Rig) : https://pasteboard.co/HcJiWo4.png (BTC Wallet address and MPH name hidden) The result : Blazepoolplus: 0,121 mBTC Zergpoolplus: 0,178 mBTC Zpoolplus: 0,011 mBTC Ahaspoolplus: 0,015 mBTC Hashref: 0,154 mBTC MiningPoolHub: 0,044 mBTC Summary: 0,523 mBTC (The difference between "total unpaid" on start-up and shutdown.) If I only mining ETH or ZEC I still have 1 mBTC a day!Thank you for your feedback ! Interesting And where do you mine ETH ? Which pool ?
|
|
|
|
chuckspadina
Newbie
Offline
Activity: 20
Merit: 0
|
|
March 20, 2018, 06:23:09 PM |
|
Is there a way to switch between pools? I get that there's auto algo-switching WITHIN a pool
However, is there a possibility of switching between pools, maybe for example, zpool and miningpoolhub, or even zergpool?
|
|
|
|
Raziel666
Newbie
Offline
Activity: 63
Merit: 0
|
|
March 20, 2018, 06:54:42 PM |
|
Is there a way to switch between pools? I get that there's auto algo-switching WITHIN a pool
However, is there a possibility of switching between pools, maybe for example, zpool and miningpoolhub, or even zergpool?
Yes, just enter the name of the pools separated by commas.
|
|
|
|
k2laci
Member
Offline
Activity: 172
Merit: 10
|
|
March 20, 2018, 06:56:21 PM |
|
I've done a 24-hour test with these settings (I have 6x1070 GPU Rig) : https://pasteboard.co/HcJiWo4.png (BTC Wallet address and MPH name hidden) The result : Blazepoolplus: 0,121 mBTC Zergpoolplus: 0,178 mBTC Zpoolplus: 0,011 mBTC Ahaspoolplus: 0,015 mBTC Hashref: 0,154 mBTC MiningPoolHub: 0,044 mBTC Summary: 0,523 mBTC (The difference between "total unpaid" on start-up and shutdown.) If I only mining ETH or ZEC I still have 1 mBTC a day!Thank you for your feedback ! Interesting And where do you mine ETH ? Which pool ? Anywhere: Ethermine, Nicehash, MPH, etc.
|
|
|
|
monkeyguy
Newbie
Offline
Activity: 5
Merit: 0
|
|
March 20, 2018, 07:15:34 PM |
|
Anyone know how I could set it to start with the GUI minimized? Putting -windowstyle minimized in the start.bat minimizes the console, but not the gui.
|
|
|
|
BitBustah
|
|
March 20, 2018, 07:19:43 PM |
|
Kinda too lazy to browse all those pages... Can the -interval still be set?
|
|
|
|
monkeyguy
Newbie
Offline
Activity: 5
Merit: 0
|
|
March 20, 2018, 08:24:57 PM Last edit: March 21, 2018, 07:07:36 PM by monkeyguy |
|
Kinda too lazy to browse all those pages... Can the -interval still be set?
It can be set in the ps1 afaik. Nemo has said it's better to change the decaybase instead if you want to decrease switching. Personally, I just use a high ActiveMinerPctGain
|
|
|
|
ravenj
Newbie
Offline
Activity: 41
Merit: 0
|
|
March 21, 2018, 09:48:16 AM |
|
Hello
I’ve been using nemosminer for some time with zergpool and I've been noticing that, in the last few days, hashrate of different miners decreases over time instead of increasing. If the miner restarts the hashrate goes to normal.
Why is this happening?
|
|
|
|
sundownz
|
|
March 21, 2018, 11:29:44 AM |
|
To work with the new zergpool address structure this is the fix:
In the zergpool .ps1 you change this:
$Locations | ForEach { $Location = $_
$zergpool_Request | Get-Member -MemberType NoteProperty | Select-Object -ExpandProperty Name | foreach { $zergpool_Host = If ($Location -eq "Europe"){$Location + ".mine.zergpool.com"}else{"$_.mine.zergpool.com"}
-----
Add the part in BOLD/RED text -- and that is it!
Announcement from zergpool.com :
"We will change to <ALGO>.mine.zergpool.com:<PORT> server name format, so you can start updating your configuration to support this slowly. Old format is operational as well"
-----
I am deploying NEMO 2.5.2 /Zergpool on a bunch of systems and I don't want to have to go back and update later so just made this change manually =)
|
|
|
|
crackfoo
Legendary
Offline
Activity: 3500
Merit: 1126
|
|
March 21, 2018, 01:33:17 PM |
|
We've added a new algo to zpool: sha256t
Cheers
|
ZPOOL - the miners multipool! Support We pay 10 FLUX Parallel Assets (PA) directly to block rewards! Get paid more and faster. No PA fee's or waiting around for them, paid instantly on every block found!
|
|
|
manc
Newbie
Offline
Activity: 84
Merit: 0
|
|
March 21, 2018, 03:26:15 PM Last edit: March 21, 2018, 03:48:03 PM by manc |
|
@minerx117 Just grabbed a fresh 3.0 master download and I see you've moved almost all of the ccminer algos to Tpruvot Cuda9... was there some big update? For quite a while now I've run the alexis polytimos release as it had the best hash on many of them - x17, c11, skein off the top of my head.
-19 on X17?
Are you guys trying to down tune the miners??
|
|
|
|
geck
Member
Offline
Activity: 145
Merit: 10
|
|
March 21, 2018, 04:48:45 PM |
|
I've been testing the version 3 yesterday and I have an issue to report. It might be something I overlooked because of the new design, but let me start by explaining how I work the version 2 atm.
I have 2 different kinds of cards on my rig, so each kind of card is more profitable in different algos. Because of that, I don't want to run an average of all my cards on every algo and instead I've made 2 folders of NemosMiner, each folder with different data inside the "stats" folder and I run 2 instances at the same time, one for each group of cards. At first the benchmark would get confused when two ccminers were running and it'd update the hashrate incorrectly. In order to fix that, I run the benchmark on the 1st group and then turned the "*HashRate.txt" files into read-only. I then benchmarked the 2nd group of cards and again locked their hashrate files into read-only. Since then, running 2 instances at the same time works like charm, the only drawback is that the hashrates are not being updated automatically but if you don't change anything in your system, the hashrate rarely changes because of an updated miner... and of course you can just run the benchmark again!
I believe the above trick would help people with more cards than the miner can handle? Maybe?
Anyway to be honest I posted the above long explanation in case someone wants to try it, the issue I have with version 3 with the above setup is pretty simple... I can't setup specific cards for each instance OR I'm doing it wrong and there's no documentary to help me!
You could setup if you switch to manual edition of the config files. However, NPlusMiner now supports running multiple instances. I guess that might ease your life https://github.com/MrPlusGH/NPlusMiner/releasesMultiple instances doesn't fully work for me. If i start the second after the first instance is running, the second instance would close the miner for the first instance until the sleep cycle is over. Also if i do not make the hashrate files read-only, there is a chance that it will get overwritten. What i have done for now is to benchmark separately, making the hash-rate files read-only, then starting both instances simultaneously. The other thing i noticed is, and i'm not sure if its a bug, is i have about 10 different instances running at the same time. All 10 would have different btc/gh/day values. The difference is about a couple of percent, but this means on the same rig with the same cards, i would have two instances mining different algos. Is this normal?
|
|
|
|
Zirillian
Newbie
Offline
Activity: 34
Merit: 0
|
|
March 21, 2018, 06:08:27 PM |
|
I just updated to Nemos Miner 2.4.1 and on 2 PCs it seems to be stuck trying to benchmark xmrig which doesn't launch and it just sits there saying Sleep 300 sec https://i.imgur.com/pKgqF6g.pngI too have this same issue. I tried removing the coins that gave me errors but it keeps ticking off all coins one right after another as having an issue (after I remove problem ones). What's going on here?
|
|
|
|
MaxiMan
Newbie
Offline
Activity: 85
Merit: 0
|
|
March 21, 2018, 08:22:39 PM |
|
Can i just run bat with commands as before 3.0? I want to make a batch for different pools and GPUs as before
|
|
|
|
MaxiMan
Newbie
Offline
Activity: 85
Merit: 0
|
|
March 22, 2018, 12:29:59 AM |
|
Payment treshold for Zergpool is incorrect Info is hosted on web as miner calls this site: http://nemosminer.x10host.com/poolapiref.json here shows its 0.01 Please correct to 0.008 or 0.004 cant edit myself this data?
|
|
|
|
RivAngE
Full Member
Offline
Activity: 728
Merit: 169
What doesn't kill you, makes you stronger
|
|
March 22, 2018, 10:57:47 AM |
|
An easy and a bit stupid question from me, I'm sure it's written somewhere but I can't find it! How can I set a custom Interval to more than 60sec? I'm sure you can since it's open source, I've edited some parameters that are sent to the miners but I couldn't find the payment threshold anywhere. I though it'd inside the "Pools" folder but I couldn't read anything like that in the files inside it.
|
|
|
|
cryptomoblo
Newbie
Offline
Activity: 60
Merit: 0
|
|
March 22, 2018, 01:45:01 PM |
|
I've done a 24-hour test with these settings (I have 6x1070 GPU Rig) : https://pasteboard.co/HcJiWo4.png (BTC Wallet address and MPH name hidden) The result : Blazepoolplus: 0,121 mBTC Zergpoolplus: 0,178 mBTC Zpoolplus: 0,011 mBTC Ahaspoolplus: 0,015 mBTC Hashref: 0,154 mBTC MiningPoolHub: 0,044 mBTC Summary: 0,523 mBTC (The difference between "total unpaid" on start-up and shutdown.) If I only mining ETH or ZEC I still have 1 mBTC a day!Thank you for your feedback ! Interesting And where do you mine ETH ? Which pool ? Anywhere: Ethermine, Nicehash, MPH, etc. Looking at your config, seeing you mine all algo's. You should only mine the 5-6 most profitable. With 6xGTX1070 I'm making 0,85 mBTC at ahashpoolplus.
|
|
|
|
chiggx
Member
Offline
Activity: 117
Merit: 10
|
|
March 22, 2018, 02:05:06 PM |
|
I am still on version 2.4, does the newest version improve mining efficiency? i am not keen to keep uninstalling and reinstalling new versions and reconfiguring batch files each time.
|
|
|
|
|