Wall Observer BTC/USD - Bitcoin price movement tracking & discussion

[Phil_S]

Observing 38 = dinosaur neck.

[Dabs]

Crypto!  = That's a smiley with a tongue sticking out.

[Gatorelf]

Like to see dinosaur eyeball

[JayJuanGee]

Observing 38 = dinosaur neck.

From $34k to $38k in a few days equals something approximating an ant's neck.

For example, something from $34k to $68k-ish in a few days would be coming a wee bit MOAR closer to the dinosaur neck concept.

Have you ever seen a dinosaur ant? 

#meneither

[Gatorelf]

an ant is a dinosaur 

[Richy_T]

BTW, have you already bought a 3D printer? I must have missed some posts there... Is it a resin-based one? Which one? I've always wanted to get into resin 3D printing, mainly due to the fine detail it can achieve. Prices have gone down considerably, so it's almost risk-free to give it a try. I'm concerned about the mess in handling the resin. I hope it's easier that what I imagine.

The resin is not too bad. I wear gloves all the time and wipe them off as I go and have a silicone mat where I do all the drippy stuff. It takes a few goes to get the handling process down right but it's pretty smooth once you have a routine. I have the Crealty ld-002h but from what I could tell, at the low end they're mostly similar. This one has a mono screen which is supposedly better than the color screens that are more common.

I'd say the resin printing is a bit more plug-and-play than the filament printing but it is a bit less flexible (while providing very good quality).

[hisslyness]

Observing 38 = dinosaur neck.

From $34k to $38k in a few days equals something approximating an ant's neck.

For example, something from $34k to $68k-ish in a few days would be coming a wee bit MOAR closer to the dinosaur neck concept.

Have you ever seen a dinosaur ant? 

#meneither

Nothomyrmecia macrops

They live in South Australia....

[ChartBuddy]

Explanation

[fillippone]

Observing 38,192
No cigars (yet)

SEC delays decision on WisdomTree's proposed bitcoin ETF

[JayJuanGee]

an ant is a dinosaur  

Never saw one with a long neck... but hey, I don't claim to be the worldly anyhow.. especially when it comes to studying either ants or dinosaurs.

Observing 38 = dinosaur neck.

From $34k to $38k in a few days equals something approximating an ant's neck.

For example, something from $34k to $68k-ish in a few days would be coming a wee bit MOAR closer to the dinosaur neck concept.

Have you ever seen a dinosaur ant?  

#meneither

Nothomyrmecia macrops

They live in South Australia....

An ant expert, go figure.



Hey, I thought that we were looking for long necks in those weeee widdle ants (or at least far reaching necks that would make an outside observer go: "WOW!!!!!")?  Wasn't that the point, or am I missing something?

[ChartBuddy]

Explanation

[ChartBuddy]

Explanation

[shahzadafzal]

OT: This is Samsung’s virtual assistant “Sam”... people finding her too attractive.

[Biodom]

OT: AMC...he he he
Heard on the street: "it's not your dad's market".

[ChartBuddy]

Explanation

[philipma1957]

Interesting: Got an S17 coming in for repair and the guy was wondering how he could trust me with his miner. I thought about it, haven't really been asked that much, then wrote this:

When it comes down to it, the only thing I have to go on is my reputation here on the forum. If I did screw you over then a posting in the Wall Observer or scammer thread that I was a jerk would pretty much tank my future business. I'll take care of your unit, check it out, see what's wrong, and hopefully get the boards running so you can get back to mining. If I can't fix it there's no charge of course. If I can the fee is a couple months of mining revenue in bitpennies plus parts (chips if needed).

I do the best I can....

I have some dead gear.  Are you in the USA?

[ChartBuddy]

Explanation

[Arriemoller]

Document just submitted. It came out really nice, but fucked me up good during the last few days... Too much pressure... I'm surprised I still have all of my hair intact (for now).

It's so good being able to read WO properly again.

So, Arrie got himself a sparkling new laptop. That's good. But Windows 10 S? Did I read this correctly? WTF?

I like ChartBuddy. Not because of its content. I don't even care about its content. It's just fun to see it pop up every now and then. Like someone farting in the elevator sort of thing. It's just like a ping in the network, a keep-alive signal. Seeing that King Daddy is not doing this lately, ChartBuddy serves that purpose nicely.

I like JJG's issues with crypto sooooo much. Whenever I see someone mentioning the word (I just did), I know there will be a reaction. And Jay is right too. WTF is crypto anyways? This is a King Daddy thread and King Daddy has a name and that name is not fucking crypto. You fucks!

In a few days I'll be having my first dose of the COVID-19 vaccine. The Pfizer variety. I know, 5G, Bill Gates, PlanDemic and all that shit. But I always liked to experiment with myself. I want this thing in me. Whatever happens, I'm a coiner, King Daddy will take care of me, I'm sure.

What a pointless post this is... But it's good to be back. The only thing left now is a mega-pump to ATH. That would take care of everything, even Arrie's crippled new laptop!

Good to see you came out of the experience alive.
I had no idea there was such a thing as a win 10S. I just bought a laptop that was on sale and didn't think anything of it, until I tried to install Chitubox. Now I'm well aware of it's existence. I will bring it over to my brothers and use his wifi to finish the setup and remove the S. I have used the time to look at Youtube tutorials, I am now, in theory, very good at modding and using my printer. If everything goes as planned we will do the first print this weekend. I found something called the "photon file validator"  that seems to make really good support for LCD printers. According to the internet chitubox's autosupport isn't that good.

Good to have you back sir!

Thanks.

It's good to be able to go from S to the non-S version. I know S is a safe, limited version, but was not aware that it can be converted to the normal Windows 10. The positive aspect of this, is that you're gaining experience in such issues, which is something that can come in handy in the future, especially for Windows users.

BTW, have you already bought a 3D printer? I must have missed some posts there... Is it a resin-based one? Which one? I've always wanted to get into resin 3D printing, mainly due to the fine detail it can achieve. Prices have gone down considerably, so it's almost risk-free to give it a try. I'm concerned about the mess in handling the resin. I hope it's easier that what I imagine.

Let us know how it performs. And be patient, 3D printing is still not quite the plug-and-play experience many expect it to be.

Yes, I made a post about what I bought here. https://bitcointalk.org/index.php?topic=178336.msg57083858#msg57083858

It's the Elegoo Mars Pro and the Elegoo Mercury Plus Washing & Curing Machine.

I have bought some more stuff since, mainly this https://www.amazon.se/gp/product/B086GQW7ZS/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

this https://www.amazon.se/ELEGOO-Plasthartstank-3D-skrivare-Hartsbeh%C3%A5llare-Kompatibel/dp/B08344RQDM/ref=pd_ybh_a_7?_encoding=UTF8&psc=1&refRID=K7QG6J39W8WMB83AXQ05

and this https://www.amazon.se/KOYOFEI-3D-skrivarplattform-magnetpl%C3%A5t-st%C3%A5lplatta-3D-skrivare/dp/B091M78TY3/ref=pd_ybh_a_8?_encoding=UTF8&psc=1&refRID=K7QG6J39W8WMB83AXQ05

The flex plates seems to be a must, I installed that today. https://www.youtube.com/watch?v=rT61uosRwFE


It seems pretty much plug and play, at least on you tube, I'll keep you posted.

[Hueristic]

The Securities and Exchange Commission is having a hard time reining in Elon Musk’s social media use, according to a new report from The Wall Street Journal.

The regulator sent Tesla three sternly worded letters between August 2019 and June 2020, asking Tesla’s attorney’s to enforce a 2018 settlement which demanded greater oversight of Musk’s social media posts. “Tesla has abdicated the duties required of it by the court’s order,” said the SEC in a letter from May of last year.

https://arstechnica.com/tech-policy/2021/06/sec-is-struggling-to-rein-in-elon-musks-tweets-letters-reveal/

Regulators must have been dabbling in shitcoins!

[serveria.com]

In a few days I'll be having my first dose of the COVID-19 vaccine. The Pfizer variety. I know, 5G, Bill Gates, PlanDemic and all that shit. But I always liked to experiment with myself.

Got second Pfizer shot a couple of days ago... all fine till now..